polyethylen Iran

Poliran 90-degree polyethylene elbow

The Poliran 90-degree polyethylene elbow is manufactured from high-density polyethylene grade PE100 with an approximate density of 0.955 g/cm³. It is designed to change the flow direction by a right angle in water supply, sewage, and pressurized irrigation systems. This fitting provides a tensile strength of about 25 MPa and impact resistance exceeding 10 kJ/m². Its operating temperature range is 0 to 40°C, and the nominal pressure varies from 6 to 16 bar depending on the model. The precisely engineered curvature and uniform wall thickness minimize pressure loss and enhance mechanical stability against localized stresses.

Poliran 90-degree elbows are available in butt-weld and electrofusion types, covering diameters from 32 to 400 mm. The butt-weld type is installed using controlled heat fusion, ensuring complete sealing and long-term durability. These fittings exhibit excellent resistance to corrosion, cracking, and UV radiation, with a service life exceeding 50 years under normal operating conditions. Manufacturing is carried out in compliance with ISIRI 14427 and ISO 4427 standards, guaranteeing quality, dimensional precision, and full compatibility with Poliran polyethylene pipes.

Poliran polyethylene reducer

The Poliran polyethylene reducer is made from high-density polyethylene grade PE100 with a density of approximately 0.955 g/cm³. It is designed to connect pipes of different diameters in water supply, sewage, and irrigation systems. This fitting is produced by high-pressure injection molding and features a tensile strength of about 25 MPa and an impact resistance above 10 kJ/m². Its operating temperature range is 0 to 40°C, with nominal pressure ratings varying between 6 and 16 bar depending on the model. The precise internal geometry minimizes flow turbulence and prevents sudden pressure drops within the pipeline.

Poliran polyethylene reducers are available in two main types: butt-weld and compression, covering diameters from 20 to 400 mm. The welded type is installed using butt fusion or electrofusion methods, ensuring complete sealing and long-term reliability. Their excellent resistance to corrosion, cracking, and chemical exposure provides a service life exceeding 50 years under normal operating conditions. The product is manufactured according to ISIRI 14427 and ISO 4427 standards and is fully compatible dimensionally and mechanically with Poliran polyethylene pipes.

Poliran Polyethylene Pipe

The Poliran polyethylene pipe is manufactured from high-density polyethylene grades PE100 and PE80 with a density ranging from 0.950 to 0.955 g/cm³. These pipes are designed for various working pressures between 4 and 25 bar and operate reliably within a temperature range of 0 to 40°C. The tensile strength of the material is approximately 25 MPa, and the linear expansion coefficient is 0.18 mm/m per °C. The uniform structure and smooth inner surface reduce pressure losses and enhance fluid transmission efficiency. Poliran polyethylene pipes are widely used in water supply networks, sewage systems, and pressurized irrigation applications.

The inner surface of these pipes is extremely smooth, with a roughness coefficient of approximately 0.007, minimizing frictional flow loss. They are produced in diameters from 16 to 400 mm and connected using butt-weld or electrofusion methods. Their excellent resistance to corrosion, crack formation, and UV radiation ensures a service life exceeding 50 years. The production of these pipes complies with ISIRI 14427 and ISO 4427 standards, guaranteeing quality, strength, and dimensional consistency under diverse operating conditions.

Poliran Two-Way Polyethylene Tee

The Poliran two-way polyethylene tee is manufactured from high-density polyethylene grade PE100 with an approximate density of 0.955 g/cm³. This fitting is designed to provide two-way connection and branching in water supply, sewage, and pressurized irrigation networks. The material has a tensile strength of approximately 25 MPa and impact resistance exceeding 10 kJ/m². Its operating temperature range is 0 to 40°C, with nominal pressure varying between 6 and 16 bar depending on the model. Precisely engineered internal geometry and uniform wall thickness minimize flow turbulence and ensure even pressure distribution in the system.

Poliran two-way tees are produced in butt-weld and electrofusion types, available in diameters from 32 to 400 mm. The butt-weld type is installed using heat fusion, providing complete sealing and high mechanical strength. Excellent resistance to corrosion, cracking, and UV radiation ensures a service life exceeding 50 years under normal operating conditions. Manufacturing complies with ISIRI 14427 and ISO 4427 standards, guaranteeing quality, dimensional accuracy, and full compatibility with Poliran polyethylene pipes.

Poliran 45-degree polyethylene elbow

The Poliran 45-degree polyethylene elbow is manufactured from high-density polyethylene grade PE100 with a density of approximately 0.955 g/cm³. This fitting is used to redirect fluid flow at a 45-degree angle in water distribution, sewage, and pressurized irrigation networks. Its tensile strength is about 25 MPa, and impact resistance exceeds 10 kJ/m². The operating temperature range is 0 to 40°C, and the nominal pressure varies from 6 to 16 bar depending on the model. The precisely engineered curvature and smooth internal surface minimize flow turbulence and pressure loss.

Poliran 45-degree elbows are produced in butt-weld and electrofusion types, available in diameters from 32 to 400 mm. The butt-weld type is installed using the butt-fusion method, providing reliable sealing and excellent mechanical strength. Their superior resistance to corrosion, cracking, and UV radiation ensures a service life exceeding 50 years under normal conditions. These fittings are manufactured in compliance with ISIRI 14427 and ISO 4427 standards, ensuring consistent quality, dimensional precision, and full compatibility with Poliran polyethylene pipes.

Poliran 45-degree polyethylene tee

The Poliran 45-degree polyethylene tee is manufactured from high-density polyethylene grade PE100 with an approximate density of 0.955 g/cm³. This fitting is designed for branching fluid flow at a 45-degree angle in water supply, sewage, and pressurized irrigation systems. The tensile strength of the material is approximately 25 MPa, and impact resistance exceeds 10 kJ/m². Its operating temperature range is 0 to 40°C, and the nominal pressure varies between 6 and 16 bar depending on the model. Precisely engineered internal geometry and angles minimize flow turbulence and ensure uniform pressure distribution.

Poliran 45-degree tees are available in butt-weld and electrofusion types, covering diameters from 32 to 400 mm. The butt-weld type is installed using heat fusion, providing complete sealing and high mechanical strength. These fittings offer excellent resistance to corrosion, cracking, and UV radiation, with a service life exceeding 50 years under normal conditions. Production complies with ISIRI 14427 and ISO 4427 standards, ensuring dimensional accuracy, consistent quality, and full compatibility with Poliran polyethylene pipes.

Poliran 90-degree polyethylene tee

The Poliran 90-degree polyethylene tee is manufactured from high-density polyethylene grade PE100 with an approximate density of 0.955 g/cm³. This fitting is designed to create a right-angle branch in water supply, sewage, and pressurized irrigation systems. It provides a tensile strength of about 25 MPa and impact resistance exceeding 10 kJ/m². Its operating temperature range is 0 to 40°C, and nominal pressure varies from 6 to 16 bar depending on the model. Precisely engineered angles and uniform wall thickness minimize pressure loss and enhance mechanical stability at branch points.

Poliran 90-degree tees are available in butt-weld and electrofusion types, covering diameters from 32 to 400 mm. The butt-weld type is installed using controlled heat fusion, ensuring complete sealing and high mechanical strength. These fittings exhibit excellent resistance to corrosion, cracking, and UV radiation, with a service life exceeding 50 years under normal operating conditions. Production complies with ISIRI 14427 and ISO 4427 standards, ensuring dimensional precision, consistent quality, and full compatibility with Poliran polyethylene pipes.

Poliran 45-Degree Reducing Tee Polyethylene Pipe

The Poliran 45-degree reducing tee is manufactured from high-density polyethylene grade PE100 with an approximate density of 0.955 g/cm³. This fitting is designed to redirect flow and connect pipes of different diameters at a 45-degree angle in water supply, sewage, and pressurized irrigation systems. Its tensile strength is approximately 25 MPa, and impact resistance exceeds 10 kJ/m². The operating temperature range is 0 to 40°C, with nominal pressure varying from 6 to 16 bar depending on the model. Precisely engineered angles and wall thickness reduce pressure loss and ensure uniform flow distribution.

Poliran 45-degree reducing tees are produced in butt-weld and electrofusion types, available in diameters from 32 to 400 mm. The butt-weld version is installed using heat fusion, providing complete sealing and high mechanical strength. Excellent resistance to corrosion, cracking, and UV radiation ensures a service life exceeding 50 years under normal operating conditions. Manufacturing complies with ISIRI 14427 and ISO 4427 standards, guaranteeing quality, dimensional accuracy, and full compatibility with Poliran polyethylene pipes.

Poliran polyethylene cross fitting

The Poliran polyethylene cross fitting is manufactured from high-density polyethylene grade PE100 with an approximate density of 0.955 g/cm³. This component is designed for four-way branching in water distribution, sewage, and pressurized irrigation systems. It provides a tensile strength of around 25 MPa and impact resistance exceeding 10 kJ/m². The operating temperature range is 0 to 40°C, and the nominal pressure rating varies between 6 and 16 bar depending on the model. Its precisely engineered angles and smooth inner walls ensure uniform flow distribution and minimize stress concentration at the branching points.

Poliran polyethylene cross fittings are available in butt-weld and electrofusion types, covering diameters from 32 to 400 mm. The butt-weld version is installed using controlled heat fusion, ensuring complete sealing and superior mechanical integrity. These fittings exhibit excellent resistance to corrosion, UV radiation, and chemical agents, offering a service life of over 50 years. Production follows ISIRI 14427 and ISO 4427 standards, ensuring dimensional precision and consistent quality across all models.

Poliran HDPE 10Bar Polyethylene Pipe

The Poliran HDPE 10bar pipe is manufactured from high-density polyethylene grade PE100 with an approximate density of 0.955 g/cm³. It is designed to withstand a working pressure of 10 bar and operates efficiently in a temperature range of 0 to 40°C. Its tensile strength is around 26 MPa, and the elastic modulus is close to 1000 MPa. The pipe’s linear expansion coefficient is about 0.18 mm/m per °C, and it offers excellent resistance to UV radiation and chemical corrosion. These properties make it suitable for municipal water transmission, sewage, and pressurized irrigation systems.

The inner surface of the Poliran HDPE pipe is extremely smooth, with a roughness coefficient of approximately 0.007, minimizing pressure loss in flow. It is produced in diameters ranging from 20 to 400 mm and lengths of 6 or 12 meters. The connection method includes butt-welding or electrofusion joints, allowing the pipe to withstand impacts at temperatures down to –20°C. The Poliran HDPE 10bar pipe complies with ISO 4427 and ISIRI 14427 standards and offers a service life exceeding 50 years under normal operating conditions.

Poliran 90 Degree Reducing Tee Polyethylene Pipe

The Poliran 90-degree reducing tee is manufactured from high-density polyethylene grade PE100 with an approximate density of 0.955 g/cm³. It is designed to redirect flow and connect pipes of different diameters at a right angle. The material’s tensile strength is approximately 25 MPa, and impact resistance exceeds 10 kJ/m². Its operating temperature range is 0 to 40°C, and nominal pressure varies from 6 to 16 bar depending on the model. Precisely engineered angles and uniform wall thickness minimize pressure loss and ensure uniform flow distribution within the network.

Poliran 90-degree reducing tees are available in butt-weld and electrofusion types, covering diameters from 32 to 400 mm. The butt-weld type is installed using heat fusion, providing complete sealing and high mechanical strength. Excellent resistance to corrosion, cracking, and UV radiation ensures a service life exceeding 50 years under normal operating conditions. Manufacturing complies with ISIRI 14427 and ISO 4427 standards, guaranteeing dimensional accuracy, consistent quality, and full compatibility with Poliran polyethylene pipes.

Polyethylene Female Adapter 75x2 1-2

The polyethylene female adapter 75x2 1/2 is one of the widely used and durable fittings in piping systems and fluid transfer applications. This fitting, with an exact size of 1/2 × 75 millimeters and a special design, is recognized as a reliable and long-lasting connector between polyethylene pipes and other system components.

Technical specifications of the polyethylene female adapter 75x2 1/2:

Connection size: 1/2 × 75 millimeters, allowing easy installation on standard pipes.

Body material: Made from polypropylene copolymer Polypropylene Copolymer, which offers high resistance to corrosion, pressure, and temperature variations.

Pressure rating: Up to 10 atmospheres, suitable for residential, industrial, and agricultural water supply systems.

Connection type: Heavy-duty threaded connection, allowing repeated tightening and loosening without damage.

Female adaptor size: 75 millimeters × 2 1/2, compatible with various pipes and equipment.

For free consultation and to purchase the polyethylene female adapter 1/2 2 × 75 millimeters online, please contact our experts.

Poliran polyethylene inspection tee

The Poliran polyethylene inspection tee is manufactured from high-density polyethylene grade PE100 with an approximate density of 0.955 g/cm³. It is designed to provide access and inspection points in water, sewage, and pressurized irrigation pipelines. The tensile strength of this fitting is about 25 MPa, and impact resistance exceeds 10 kJ/m². Its operating temperature range is 0 to 40°C, and nominal pressure varies from 6 to 16 bar depending on the model. The internal design and angles ensure uniform flow distribution and reduce turbulence in the main pipeline.

Poliran inspection tees are available in butt-weld and electrofusion types, covering diameters from 110 to 400 mm. The butt-weld type is installed using heat fusion, providing reliable sealing and high mechanical strength. These fittings offer excellent resistance to corrosion, cracking, and UV radiation, with a service life exceeding 50 years under normal operating conditions. Manufacturing complies with ISIRI 14427 and ISO 4427 standards, ensuring full compatibility with other Poliran polyethylene pipes.

Poliran LDPE Polyethylene Pipe

The Poliran LDPE pipe is manufactured from low-density polyethylene grade PE32 or PE40 with an approximate density of 0.922 g/cm³. This pipe offers excellent flexibility, light weight, and good resistance to cracking. Its operating temperature range is between 0 and 40°C, with a typical working pressure of 2.5 to 4 bar. The elastic modulus of the pipe is about 200–250 MPa, and its linear expansion coefficient is 0.20 mm/m per °C. Due to its soft and resilient structure, this product is widely used in drip irrigation and light agricultural systems.

The inner surface of the Poliran LDPE pipe is extremely smooth with a roughness coefficient of around 0.009, reducing hydraulic pressure loss. It is produced in diameters of 16, 20, and 25 mm and can be easily installed using compression or threaded fittings. Its strong resistance to UV radiation and agricultural chemicals extends its service life to more than 15 years. The manufacturing standards of this pipe comply with ISIRI 7607 and ISO 4427, ensuring consistent quality and dimensional accuracy.

Long base polyethylene flange

Long base polyethylene flanges are typically made from high-density polyethylene HDPE with a density ranging from 0.94 to 0.96 grams per cubic centimeter. These flanges can withstand nominal pressures between 6 to 16 bar PN6 to PN16 and operate within a temperature range of -20 to +60 degrees Celsius. Their manufacturing standards generally comply with international norms such as ISO 4437 and ASTM F1055. The nominal diameter of these flanges usually varies from 20 millimeters up to 1200 millimeters, depending on project requirements.

The dimensions of the long base flange include a base height between 20 to 50 millimeters, designed to facilitate connection and enhance strength. The flange surface is produced either flat or grooved to ensure reliable sealing in piping systems. Due to the lightweight polyethylene material, these flanges are easy to install and transport. The long base flange can connect to polyethylene pipes and metal flanges via bolts or thermal fusion welding, making them widely used in water, wastewater, gas, and agricultural industries.