

| Exporter,Importer,,Wholesaler,Retailer | |
| Tehran |  | 
| 021-22087856 |  | 
|  | |
|  | |
| sayalsanat@gmail.com |  | 
The Poliran 45-degree polyethylene elbow is manufactured from high-density polyethylene grade PE100 with a density of approximately 0.955 g/cm³. This fitting is used to redirect fluid flow at a 45-degree angle in water distribution, sewage, and pressurized irrigation networks. Its tensile strength is about 25 MPa, and impact resistance exceeds 10 kJ/m². The operating temperature range is 0 to 40°C, and the nominal pressure varies from 6 to 16 bar depending on the model. The precisely engineered curvature and smooth internal surface minimize flow turbulence and pressure loss.
Poliran 45-degree elbows are produced in butt-weld and electrofusion types, available in diameters from 32 to 400 mm. The butt-weld type is installed using the butt-fusion method, providing reliable sealing and excellent mechanical strength. Their superior resistance to corrosion, cracking, and UV radiation ensures a service life exceeding 50 years under normal conditions. These fittings are manufactured in compliance with ISIRI 14427 and ISO 4427 standards, ensuring consistent quality, dimensional precision, and full compatibility with Poliran polyethylene pipes.
 
WEBSITE: Poliran 45-degree polyethylene elbow Iran
