| Exporter, Wholesale, Manufacturer | |
| Tehran |  |
| +989122003350 | |
| sayalsanat@gmail.com | |
The Poliran polyethylene inspection tee is manufactured from high-density polyethylene grade PE100 with an approximate density of 0.955 g/cm³. It is designed to provide access and inspection points in water, sewage, and pressurized irrigation pipelines. The tensile strength of this fitting is about 25 MPa, and impact resistance exceeds 10 kJ/m². Its operating temperature range is 0 to 40°C, and nominal pressure varies from 6 to 16 bar depending on the model. The internal design and angles ensure uniform flow distribution and reduce turbulence in the main pipeline.
Poliran inspection tees are available in butt-weld and electrofusion types, covering diameters from 110 to 400 mm. The butt-weld type is installed using heat fusion, providing reliable sealing and high mechanical strength. These fittings offer excellent resistance to corrosion, cracking, and UV radiation, with a service life exceeding 50 years under normal operating conditions. Manufacturing complies with ISIRI 14427 and ISO 4427 standards, ensuring full compatibility with other Poliran polyethylene pipes.You can order and buy Poliran polyethylene inspection tee from Iran by contacting us through whatsaap and email.
WEBSITE: Poliran polyethylene inspection tee Iran
To install the Pliran polyethylene inspection tee, first shut off the network water flow and release system pressure. The high-density HDPE body should be aligned with the pipeline axis to avoid excessive stress on connections. Installation can be performed via heat fusion or compression fittings, ensuring proper sealing with gaskets or Teflon tape. After installation, the inspection cover should be periodically opened to check flow, sediment, and pipeline condition. Following the manufacturer’s guidelines, performing routine maintenance, and avoiding excessive impact or pressure ensure optimal performance and extended service life of the tee.
