| Exporter,Importer,,Wholesaler,Retailer | |
| Tehran |  |
| 021-22087856 | |
| |
| |
| sayalsanat@gmail.com | |
The Poliran 45-degree polyethylene tee is manufactured from high-density polyethylene grade PE100 with an approximate density of 0.955 g/cm³. This fitting is designed for branching fluid flow at a 45-degree angle in water supply, sewage, and pressurized irrigation systems. The tensile strength of the material is approximately 25 MPa, and impact resistance exceeds 10 kJ/m². Its operating temperature range is 0 to 40°C, and the nominal pressure varies between 6 and 16 bar depending on the model. Precisely engineered internal geometry and angles minimize flow turbulence and ensure uniform pressure distribution.
Poliran 45-degree tees are available in butt-weld and electrofusion types, covering diameters from 32 to 400 mm. The butt-weld type is installed using heat fusion, providing complete sealing and high mechanical strength. These fittings offer excellent resistance to corrosion, cracking, and UV radiation, with a service life exceeding 50 years under normal conditions. Production complies with ISIRI 14427 and ISO 4427 standards, ensuring dimensional accuracy, consistent quality, and full compatibility with Poliran polyethylene pipes.
WEBSITE: Poliran 45-degree polyethylene tee Iran
