Boil

Araz Sanat B400s 400,000 Steel Boiler Room Hot Water Boiler

The Araz Sanat B400s steel hot water boiler delivers a nominal thermal capacity of 400,000 kcal/h. This unit is optimized for operation with natural gas and diesel fuel. Its combustion efficiency exceeds 89 percent. The boilers maximum allowable working pressure is 6 bar. It is constructed from low-carbon ST37 steel plates. The thickness of the main body plates is precisely calculated for different sections. The boiler features a three-pass smoke tube design with a wet-back configuration. This structure maximizes heat transfer efficiency. Its heating surface area is approximately 12 square meters. All seams and connections are tested using argon welding methods. This process guarantees structural integrity and quality.

This hot water boiler is manufactured in compliance with the EN 12953 international standard. The body is insulated with refractory rock wool with a density of 120 kg/m³. The external cladding consists of 0.6 mm thick galvanized sheet. It is equipped with an atmospheric burner capable of capacity modulation. The output water temperature is controlled within a range of 70 to 90 degrees Celsius. Key components include a cylindrical furnace and a combustion chamber. The overall dimensions are approximately 250 by 120 by 120 centimeters. This product is suitable fo

Ferroli Pegasus D45K130 floor-standing storage boiler

The Ferroli Pegasus D45K130 floor-standing storage boiler, with a heating capacity of 38 kW, is one of Ferroli’s most powerful models, ideal for large homes and villas with high heating and hot water demands. It features a dual heat exchanger system: a primary cast-iron heat exchanger resistant to corrosion and high temperatures, and a secondary stainless steel exchanger for instant domestic hot water production. The boiler achieves approximately 91% thermal efficiency, with a maximum heating circuit temperature of 80°C and a working pressure up to 3 bar. It includes a 130-liter enameled steel hot water tank with high-density insulation for minimal heat loss.

The Pegasus D45K130 is equipped with a fan-assisted burner, electronic flame control, frost protection, anti-pump seizure, and overheating protection systems. It can be connected to room thermostats for intelligent temperature management and operates on 230V single-phase electricity. The domestic hot water production rate is around 20 liters per minute with a 25°C temperature rise, suitable for multiple simultaneous outlets. Featuring a low-noise design, electrostatic powder-coated steel body, and compact form factor, this model ensures both performance and durability. The Ferroli Pegasus D45K130 complies with CE Euro

Ferroli Divatop D F37D wall-hung boiler

The Ferroli Divatop D F37D wall-hung boiler, with a thermal capacity of 32 kW, is one of Ferroli’s top-performing models designed for large residential areas and high-demand heating applications. It features a copper primary heat exchanger with an anti-corrosion coating and a stainless steel plate secondary heat exchanger, ensuring fast and stable heat transfer. With an efficiency of approximately 93%, it delivers domestic hot water up to 60°C and heating water up to 80°C. The heating circuit supports up to 3 bar pressure, with an 8-liter expansion vessel. Its fan-assisted, electronically modulated burner ensures low gas consumption, quiet operation, and stable performance.

The Divatop D F37D includes a digital display and advanced safety systems such as frost protection, anti-pump lock, anti-temperature fluctuation, and automatic fault diagnostics. It can be connected to room thermostats and outdoor sensors for optimized energy management. The domestic hot water flow rate is about 17.5 liters per minute at a 25°C temperature rise, suitable for multiple simultaneous usage points. Weighing approximately 36 kg, its compact design allows easy installation even in confined spaces. The F37D model complies with European CE standards for safety, efficiency, and low noise operati

Lorch Adena 32 kW wall-mounted boiler

The Lorch Adena 32 kW wall-mounted boiler is a dual heat exchanger system with a 32 kW output and approximately 92 percent thermal efficiency. Designed for residential and commercial spaces up to 200 square meters, it provides simultaneous space heating and domestic hot water. The primary heat exchanger is copper with an anti-scale coating, while the secondary is stainless steel to ensure efficient heat transfer and long-lasting durability. The fan-assisted electronic combustion system maintains stable performance and optimized gas consumption even at low gas pressures of 5 mbar. The heating circuit operates at 3 bar, and the domestic hot water flow rate reaches approximately 15 liters per minute at 35°C.

This boiler includes advanced safety features such as anti-freeze protection, automatic flame control, over-temperature protection, and safeguards against pressure fluctuations. The digital display provides real-time monitoring of temperature, pressure, and fault codes. Operating noise is below 39 dB, making it suitable for residential and commercial installation. The unit measures 770×420×310 mm and weighs approximately 35 kg. The Adena 32 kW model is compatible with smart thermostats and remote control systems and is engineered according to Class A energy efficiency stan

Lorch Artman 32 kW condensing wall-mounted boiler

The Lorch Artman 32 kW condensing wall-mounted boiler is a dual heat exchanger system with high thermal efficiency of approximately 94 percent and a 32 kW output. Designed for residential and commercial spaces up to 200 square meters, it provides simultaneous space heating and domestic hot water. The primary heat exchanger is copper with an anti-scale coating, while the secondary is stainless steel for optimal heat transfer and long-term durability. The fan-assisted electronic combustion system ensures stable operation and efficient gas consumption even at low gas pressures of 5 mbar. The heating circuit operates at 3 bar, and domestic hot water flow rate reaches 15 liters per minute at 35°C.

This condensing boiler includes comprehensive safety systems such as anti-freeze protection, automatic flame control, over-temperature protection, and pressure fluctuation safeguards. The digital display provides accurate monitoring of temperature, pressure, and system faults. Operating noise is below 39 dB, making it suitable for residential and commercial installation. The unit measures 770×420×310 mm and weighs approximately 35 kg. The Artman 32 kW model supports smart thermostats and remote control systems and is designed according to Class A energy efficiency standards.

Ferroli Divatop D F32D wall-hung boiler

The Ferroli Divatop D F32D wall-hung boiler, with a 28 kW heating capacity, is a high-efficiency and low-consumption model designed for medium to large residential spaces. It features a copper primary heat exchanger with an anti-corrosion coating and a stainless steel plate secondary heat exchanger for optimal thermal exchange between the heating and domestic hot water circuits. With an efficiency of around 93%, it provides heating water up to 80°C and domestic hot water up to 60°C. The heating circuit operates at pressures up to 3 bar, supported by an 8-liter expansion vessel. The fan-assisted, electronically modulated burner ensures quiet, stable, and fuel-efficient operation.

The Divatop D F32D includes a digital display and advanced safety systems such as frost protection, anti-pump seizure, temperature stabilization, and automatic fault diagnostics. It supports connection to room thermostats and outdoor sensors for enhanced energy efficiency. In hot water mode, it delivers approximately 15.3 liters per minute with a 25°C temperature rise. The unit weighs about 35 kg, and its compact design allows easy installation in confined spaces. Operating below 50 dB, the F32D complies with CE European standards for safety, performance, and environmental efficiency.

Steel Hot Water Boiler for Central Heating 150,000 Aras Sanat Model B150s

The Aras Sanat B150s steel hot water boiler is constructed from stainless steel with a thickness of 6 to 10 millimeters and is designed for high heat transfer in central heating systems. Its thermal capacity is 150,000 kilocalories per hour, with an adjustable operating temperature range of 70 to 95 degrees Celsius. The internal volume is approximately 1,200 liters, and the maximum design pressure is 6 bar. The heat transfer surface is enhanced with water tubes and fins, achieving a thermal efficiency of around 88 percent. The boiler features a front access door, short flue path, and provisions for temperature and pressure sensors.

The B150s steel hot water boiler is equipped with safety systems including a pressure relief valve, thermostat, and high-limit switch to ensure stable operation and prevent damage. The outer shell is coated with heat-resistant paint and insulated with approximately 50 millimeters of glass wool, keeping energy loss below 7 percent. The total weight is around 850 kilograms, and the dimensions are optimized for medium-sized boiler rooms. Inlet and outlet pipes are 2 inches in diameter for direct connection to pumped circulation heating systems. The product complies with Iranian national standards and EN 303-1 international standards.

Steel Hot Water Boiler for Central Heating 300,000 Aras Sanat Model B300s

The Aras Sanat B300s steel hot water boiler is made of durable steel with a thickness of 10 to 14 millimeters and is designed for very high-capacity industrial and building central heating systems. Its thermal capacity is 300,000 kilocalories per hour, with an adjustable operating temperature range of 70 to 95 degrees Celsius. The internal volume is approximately 2,400 liters, and the maximum design pressure is 6 bar. The heat transfer surface is optimized with water tubes and fins, achieving a thermal efficiency of around 88 percent. The boiler features a front access door, a short flue path, and provisions for temperature and pressure sensors.

The B300s steel hot water boiler includes safety systems such as a pressure relief valve, thermostat, and high-limit switch to prevent body damage. The exterior is coated with heat-resistant paint and insulated with 50 millimeters of glass wool, keeping energy loss below 7 percent. The total weight is approximately 1,500 kilograms, and the dimensions are suitable for large industrial boiler rooms. Inlet and outlet pipes are 2 inches in diameter for direct connection to pumped circulation systems. The product complies with Iranian national standards and EN 303-1 international standards.

Ferroli Divatop D F24D wall-hung boiler

The Ferroli Divatop D F24D wall-hung boiler, with a thermal capacity of 24 kW, is one of Ferroli’s reliable and energy-efficient models. It features a copper primary heat exchanger with an anti-corrosion coating, designed for both central heating and domestic hot water production. The unit delivers an efficiency of approximately 93%, providing heating water up to 80°C and domestic hot water up to 60°C. The heating circuit operates at a pressure of up to 3 bar, supported by an 8-liter expansion vessel. Its fan-assisted, modulating burner ensures stable performance and reduced gas consumption in varying weather conditions.

The Divatop D F24D includes a digital display and multiple safety systems such as frost protection, anti-pump seizure, and electronic temperature control. It can connect to room thermostats and outdoor sensors for enhanced energy savings. The domestic hot water output is approximately 13.7 liters per minute at a 25°C temperature rise. With a compact design and a weight of about 33 kg, installation and maintenance are straightforward. The unit complies with European CE standards for safety, efficiency, and low noise levels, operating below 50 dB for quiet and comfortable heating performance.

Steel Hot Water Boiler for Central Heating 250,000 Aras Sanat Model B250s

The Aras Sanat B250s steel hot water boiler is made of durable steel with a thickness of 8 to 14 millimeters and is designed for high-capacity industrial and building central heating systems. Its thermal capacity is 250,000 kilocalories per hour, with an adjustable operating temperature range of 70 to 95 degrees Celsius. The internal volume is approximately 2,000 liters, and the maximum design pressure is 6 bar. The heat transfer surface is optimized with water tubes and fins, achieving a thermal efficiency of around 88 percent. The boiler features a front access door, a short flue path, and provisions for temperature and pressure sensors.

The B250s steel hot water boiler includes safety systems such as a pressure relief valve, thermostat, and high-limit switch to prevent body damage. The exterior is coated with heat-resistant paint and insulated with 50 millimeters of glass wool, keeping energy loss below 7 percent. The total weight is approximately 1,250 kilograms, and the dimensions are suitable for large industrial boiler rooms. Inlet and outlet pipes are 2 inches in diameter for direct connection to pumped circulation systems. The product complies with Iranian national standards and EN 303-1 international standards.

Lorch Artman 70 kW wall-mounted boiler

The Lorch Artman 70 kW wall-mounted boiler is a high-performance dual heat exchanger system with a 70 kW output and approximately 91 percent efficiency. Designed for large residential or commercial spaces, it provides simultaneous heating and domestic hot water supply. The primary heat exchanger is made of copper with an anti-scale coating, while the secondary is stainless steel for maximum durability and efficient heat transfer. The heating circuit operates up to 4 bar pressure, and the hot water flow rate reaches about 28 liters per minute at 35°C. Its fan-assisted modular burner ensures stable combustion and optimized gas consumption even at low pressure.

This model features advanced safety systems including anti-freeze protection, over-temperature control, electronic flame supervision, and precision pressure sensors. The digital display allows real-time monitoring of temperature, pressure, and fault codes. Operating noise is below 45 dB, suitable for compact boiler rooms. The unit measures 950×500×400 mm and weighs approximately 52 kg. The Artman 70 supports smart thermostat connectivity and intelligent temperature management and is engineered according to Class A energy efficiency standards.

Steel Hot Water Boiler for Central Heating 175,000 Aras Sanat Model B175s

The Aras Sanat B175s steel hot water boiler is made of durable steel with a thickness of 6 to 12 millimeters and is designed for high-capacity central heating systems. Its thermal capacity is 175,000 kilocalories per hour, with an adjustable operating temperature range of 70 to 95 degrees Celsius. The internal volume is approximately 1,400 liters, and the maximum operating pressure is 6 bar. The heat transfer surface is enhanced with water tubes and fins, achieving thermal efficiency of around 88 percent. The boiler features a front access door, a short flue path, and provisions for temperature and pressure sensors.

The B175s steel hot water boiler includes safety systems such as a pressure relief valve, thermostat, and high-limit switch to prevent damage to the body. The exterior is coated with heat-resistant paint and insulated with 50 millimeters of glass wool, keeping energy loss below 7 percent. The total weight is approximately 950 kilograms, and the dimensions are suitable for medium to large boiler rooms. Inlet and outlet pipes are 2 inches in diameter for direct connection to pumped circulation systems. The product complies with Iranian national standards and EN 303-1 international standards.

Lorch Herma 24 kW wall-mounted boiler

The Lorch Herma 24 kW wall-mounted boiler is a dual heat exchanger system with a 24 kW thermal output and approximately 91.5 percent efficiency. Designed for residential units up to 140 square meters, it provides simultaneous space heating and domestic hot water. The primary heat exchanger is copper with an anti-scale coating, while the secondary is stainless steel for long-lasting durability and effective heat transfer. The combustion system is fan-assisted with electronic control, maintaining stable operation under gas pressure as low as 5 mbar. The heating circuit operates at 3 bar, and the hot water flow rate reaches about 11 liters per minute at 35°C.

This boiler features advanced safety systems such as anti-freeze protection, automatic flame control, and safeguards against over-temperature and pressure fluctuations. Its digital display shows real-time temperature, pressure, and fault codes. Operating noise remains below 38 dB, making it ideal for indoor installation. The unit measures 730×400×290 mm and weighs approximately 30 kg. The Herma 24 kW model is compatible with smart room thermostats and remote control systems and is designed according to Class A energy efficiency standards.

Lorch Herma 28 kW wall-mounted boiler

The Lorch Herma 28 kW wall-mounted boiler is a dual heat exchanger system with a 28 kW output and approximately 92 percent thermal efficiency. Designed for residential areas up to 180 square meters, it provides consistent space heating and domestic hot water simultaneously. The primary heat exchanger is made of copper with an anti-scale coating, while the secondary is stainless steel for long-lasting durability and efficient heat transfer. The fan-assisted electronic combustion system maintains stable performance even at gas pressures as low as 5 mbar. The heating circuit operates at 3 bar, and the domestic hot water flow rate reaches 13.2 liters per minute at 35°C.

This boiler includes advanced safety systems such as anti-freeze protection, automatic flame control, overheat protection, and precise pressure sensors. The digital display provides real-time information on temperature, pressure, and system errors. Operating noise is below 39 dB, making it ideal for residential use. The unit measures 740×400×300 mm and weighs approximately 32 kg. The Herma 28 kW model supports smart room thermostats and remote control systems and is engineered according to Class A energy efficiency standards.

Lorch Adena 24 kW wall-mounted boiler

The Lorch Adena 24 kW wall-mounted boiler is a dual heat exchanger system with a 24 kW output and approximately 91 percent thermal efficiency. Designed for residential spaces up to 150 square meters, it provides simultaneous radiator heating and domestic hot water. The primary heat exchanger is made of copper with an anti-scale coating, while the secondary is stainless steel to ensure efficient heat transfer and long-term durability. The fan-assisted electronic combustion system maintains stable performance at gas pressures as low as 5 mbar. The heating circuit operates at 3 bar, and the domestic hot water flow rate reaches approximately 11 liters per minute at 35°C.

This boiler includes safety systems such as anti-freeze protection, automatic flame control, over-temperature and pressure safeguards, and precise thermal sensors. The digital display shows real-time temperature, pressure, and error codes. Operating noise remains below 38 dB, making it ideal for indoor installation. The unit measures 740×400×290 mm and weighs approximately 31 kg. The Adena 24 kW model supports smart room thermostats and remote control systems and is designed according to Class A energy efficiency standards.

Lorch Artman 45 kW wall-mounted boiler

The Lorch Artman 45 kW wall-mounted boiler is a dual heat exchanger heating system with a 45 kW output and approximately 92 percent efficiency. Designed for medium to large buildings, it provides simultaneous radiator heating and domestic hot water supply. The primary heat exchanger is copper with an anti-scale coating, while the secondary is stainless steel, ensuring corrosion resistance and efficient heat transfer. The fan-assisted modular combustion system maintains stable performance under gas pressure as low as 5 mbar. The heating circuit operates up to 4 bar, and the domestic hot water flow rate is about 20 liters per minute at 35°C.

This model includes comprehensive safety systems such as anti-freeze protection, low-pressure safeguard, automatic flame control, and precision thermal sensors. The digital display provides real-time information on temperature, pressure, and error codes. Operating noise is below 42 dB, making it suitable for residential environments. The unit measures 900×480×380 mm and weighs approximately 47 kg. The Artman 45 kW model supports smart thermostats and remote control systems and is engineered in accordance with Class A energy efficiency standards.

Lorch Hero 24 kW wall-mounted boiler

The Lorch Hero 24 kW wall-mounted boiler is a dual heat exchanger heating system with approximately 92 percent thermal efficiency and a 24 kW output capacity. Designed for residential spaces up to 150 square meters, it provides both space heating and domestic hot water simultaneously. The primary heat exchanger is made of copper with an anti-scale coating, while the secondary is stainless steel for durability and efficient heat transfer. The fan-assisted modular combustion system ensures stable performance under gas pressure as low as 5 mbar. The heating circuit operates at up to 3 bar pressure, and the domestic hot water flow rate reaches about 11.3 liters per minute at 35°C.

This model includes safety features such as anti-freeze protection, automatic flame control, over-pressure and over-temperature safeguards. The digital display provides precise real-time status and error codes. Operating noise remains below 38 dB, making it ideal for residential installation. The unit measures 740×400×300 mm and weighs approximately 32 kg. The Hero 24 kW model supports smart thermostats and remote temperature control systems and is designed according to Class A energy efficiency standards.

Lorch Adena 28 kW wall-mounted boiler

The Lorch Adena 28 kW wall-mounted boiler is a dual heat exchanger system with a 28 kW output and approximately 92 percent thermal efficiency. Designed for residential units up to 180 square meters, it provides simultaneous radiator heating and domestic hot water. The primary heat exchanger is copper with an anti-scale coating, while the secondary is stainless steel for durability and efficient heat transfer. The fan-assisted electronic combustion system maintains stable performance even at gas pressures as low as 5 mbar. The heating circuit operates at 3 bar, and the domestic hot water flow rate is approximately 13.2 liters per minute at 35°C.

This boiler includes safety features such as anti-freeze protection, automatic flame control, over-temperature protection, and safeguards against pressure fluctuations. The digital display provides real-time information on temperature, pressure, and error codes. Operating noise is below 39 dB, making it ideal for residential use. The unit measures 740×400×300 mm and weighs approximately 32 kg. The Adena 28 kW model supports smart room thermostats and remote control systems and is designed according to Class A energy efficiency standards.

Steel Hot Water Boiler for Central Heating 200,000 Aras Sanat Model B200s

The Aras Sanat B200s steel hot water boiler is made of durable steel with a thickness of 8 to 12 millimeters and is designed for high-capacity central heating systems. Its thermal capacity is 200,000 kilocalories per hour, with an adjustable operating temperature range of 70 to 95 degrees Celsius. The internal volume is approximately 1,600 liters, and the maximum design pressure is 6 bar. The heat transfer surface is enhanced with water tubes and fins, achieving a thermal efficiency of around 88 percent. The boiler features a front access door, short flue path, and provisions for temperature and pressure sensors.

The B200s steel hot water boiler includes safety systems such as a pressure relief valve, thermostat, and high-limit switch to prevent body damage. The exterior is coated with heat-resistant paint and insulated with 50 millimeters of glass wool, keeping energy loss below 7 percent. The total weight is approximately 1,050 kilograms, and the dimensions are suitable for large boiler rooms. Inlet and outlet pipes are 2 inches in diameter for direct connection to pumped circulation systems. The product complies with Iranian national standards and EN 303-1 international standards.

Lorch Herma 32 kW wall-mounted boiler

The Lorch Herma 32 kW wall-mounted boiler is a dual heat exchanger system with a 32 kW output and approximately 92.5 percent efficiency. Designed for residential spaces up to 200 square meters, it provides simultaneous space heating and domestic hot water. The primary heat exchanger is copper with an anti-scale coating, while the secondary is stainless steel for efficient heat transfer and long-term durability. The fan-assisted electronic combustion system ensures stable performance even at gas pressures as low as 5 mbar. The heating circuit operates at 3 bar, and the domestic hot water flow rate reaches approximately 15 liters per minute at 35°C.

This boiler includes safety features such as anti-freeze protection, automatic flame control, over-temperature protection, and safeguards against pressure fluctuations. Its digital display shows real-time temperature, pressure, and error codes. Operating noise is below 39 dB, making it ideal for residential installation. The unit measures 760×420×300 mm and weighs approximately 34 kg. The Herma 32 kW model supports smart room thermostats and remote control systems and is designed according to Class A energy efficiency standards.

Araz Sanat B82s 820000 kcal/h Steel Hot Water Boiler

The Araz Sanat B82s steel hot water boiler, with a thermal capacity of 820,000 kcal/h, is designed for residential, commercial, and industrial central heating systems. This three-pass, reverse-flame design provides over 90 percent thermal efficiency. The boiler body is made of 8–12 mm thick ST37 alloy steel, offering high resistance to heat and pressure. The internal furnace, built from fire-tube steel with a cylindrical full-penetration welded structure, ensures uniform heat transfer and stable performance. The maximum working pressure is 6 bar, and the hydrostatic test pressure reaches 9 bar for operational safety.

The B82s model is compatible with gas, diesel, and dual-fuel burners, making it suitable for central boiler rooms. Thermal insulation consists of 50 mm thick compressed rock wool to minimize heat loss. The front and rear doors are hinged for easy maintenance and inspection access. Overall dimensions are 2250×1250×1450 millimeters, with an approximate weight of 940 kilograms. The high-temperature resistant coating, precision engineering, and robust construction guarantee long service life and reliable operation under continuous load conditions.

Araz Sanat B102s 1,020,000 kcal/h Steel Hot Water Boiler

The Araz Sanat B102s steel hot water boiler, with a heating capacity of 1,020,000 kcal/h, is designed for large residential, commercial, and industrial heating systems. This three-pass, reverse-flame design achieves over 90 percent thermal efficiency. The body is made of 8–14 mm thick ST37 alloy steel, providing excellent mechanical strength under high pressure and temperature. The inner furnace is constructed from fire-tube steel using full-penetration welding for uniform heat transfer. The boiler’s maximum working pressure is 6 bar, and its hydrostatic test pressure reaches 9 bar, ensuring safe and reliable operation.

The B102s model supports gas, diesel, and dual-fuel burners, making it suitable for central boiler rooms. Thermal insulation consists of 50 mm thick compressed rock wool to minimize heat loss. The front and rear doors are hinged for convenient maintenance and inspection. Overall dimensions are 2400×1350×1550 millimeters, with an approximate weight of 1050 kilograms. The high-temperature resistant coating and precision engineering ensure long service life, high efficiency, and stable performance during continuous operation.

Araz Sanat B120s 1,200,000 kcal/h Steel Hot Water Boiler

The Araz Sanat B120s steel hot water boiler, with a heating capacity of 1,200,000 kcal/h, is designed for large residential complexes, hospitals, hotels, and industrial facilities. This three-pass reverse-flame boiler provides more than 90 percent thermal efficiency. The body is made of 8–14 mm thick ST37 alloy steel, ensuring high resistance to heat and pressure. The cylindrical internal furnace, made from fire-tube steel with full-penetration welding, delivers uniform and efficient heat transfer. The maximum working pressure is 6 bar, and the hydrostatic test pressure reaches 9 bar, guaranteeing safe and reliable operation.

The B120s model supports gas, diesel, and dual-fuel burners, making it ideal for central boiler rooms. Thermal insulation consists of 50 mm thick compressed rock wool to reduce heat loss. The front and rear doors are hinged for easy access and maintenance. Overall dimensions are 2550×1400×1600 millimeters, with an approximate weight of 1150 kilograms. The high-temperature resistant coating, precise engineering, and standard fittings ensure long service life, energy efficiency, and stable operation under continuous use.

Khazar Boiler KMWB-82 steel hot water boiler

The Khazar Boiler KMWB-82 steel hot water boiler, with a thermal capacity of approximately 820,000 kcal/h, is designed for large buildings, residential complexes, and industrial heating systems. It features a three-pass, reverse-flame combustion chamber, delivering over 90 percent thermal efficiency. The body is constructed from 8–12 mm thick ST37 alloy steel, ensuring durability under high temperature and pressure. The furnace is made of fire-tube steel with a reverse flame design for uniform heat distribution. The boiler operates at a maximum working pressure of 6 bar and a hydrostatic test pressure of 9 bar.

The KMWB-82 model supports gas, diesel, and dual-fuel burners, making it suitable for central heating installations. Its front and rear doors are removable for easy maintenance and inspection. The thermal insulation consists of 50 mm thick compressed rock wool, preventing heat loss and improving efficiency. Overall dimensions are 2300×1300×1500 millimeters, with an approximate weight of 980 kilograms. The high-temperature resistant coating and robust design ensure reliable and long-term operation under continuous load conditions.

Lorch Hiwa 24 kW wall-mounted boiler

The Lorch Hiwa 24 kW wall-mounted boiler is a dual heat exchanger unit with approximately 91 percent efficiency and a 24 kW heating output. Designed for residential areas up to 150 square meters, it provides simultaneous radiator heating and domestic hot water. The primary heat exchanger is made of copper with an anti-scale coating, while the secondary exchanger is stainless steel. The combustion system is fan-assisted with electronic control, maintaining stable operation under gas pressure as low as 5 mbar. The heating circuit pressure is rated at 3 bar, and the domestic hot water flow rate reaches 11 liters per minute at 35°C.

This model includes advanced safety systems such as anti-freeze protection, automatic flame control, over-temperature protection, and precise pressure sensors. Its digital display shows real-time operational status and error codes. Operating noise is below 38 dB, making it ideal for indoor installation. The unit measures 740×400×290 mm and weighs approximately 31 kg. The Hiwa 24 kW model supports smart room thermostats and remote control systems and is engineered according to Class A energy efficiency standards.

Ferroli Bluehelix RRT condensing boiler

The Ferroli Bluehelix RRT condensing boiler is an advanced high-efficiency model designed with an energy efficiency of up to 108%. It features a primary heat exchanger made of AISI 316L stainless steel, providing excellent resistance to corrosion and high temperatures. The unit offers thermal capacities ranging from 24 to 35 kW, suitable for medium to large residential spaces. It operates with a fully modulating combustion system and a fan-assisted burner with electronic control for optimal fuel efficiency. The heating circuit pressure is rated up to 3 bar, with a maximum working temperature of 80°C.

Equipped with true condensing technology, the Bluehelix RRT recovers latent heat from exhaust gases, significantly reducing gas consumption. It includes a Class A high-efficiency pump, frost protection, anti-pump lock, and anti-heat exchanger blockage systems. The digital LCD interface allows precise temperature control and system monitoring. Manufactured in compliance with European ERP standards for safety and energy performance, this boiler operates quietly with a noise level below 50 dB, ensuring comfort and reliability in long-term use.

Immergas MAIOR EOLO PRO 32 wall-mounted boiler

The Immergas MAIOR EOLO PRO 32 wall-mounted boiler is a dual heat exchanger system providing heating and domestic hot water with a 32 kW output and 93 percent efficiency. It features a fan-assisted burner with electronic modulation and ensures stable operation at gas pressures as low as 5 mbar. The primary heat exchanger is made of copper with anti-corrosion coating, while the secondary one is stainless steel. The heating circuit operates at 3 bar pressure and supplies 15.3 liters of hot water per minute at 35°C. The maximum heating temperature is 80°C, and domestic hot water reaches up to 60°C.

This unit includes full safety systems such as anti-freeze protection, automatic combustion control, low-pressure safeguard, and precise thermal sensors. Its digital display continuously shows operation status and fault codes. Operating noise remains under 39 dB, ideal for residential applications. The device measures 760×440×290 mm and weighs approximately 35 kg. MAIOR EOLO PRO 32 is compatible with smart room thermostats and remote control systems and is designed in accordance with Class A energy efficiency standards.

Boiler Homopolymer Relay

The steam boiler homopolymer relay is a precise electromechanical relay designed for controlling and protecting electrical circuits in burners and boilers. It operates with a supply voltage of 230 volts AC and can handle currents up to 10 amperes. Its fast response time of under 15 milliseconds ensures reliable and safe operation. The durable housing provides stability against temperature, vibration, and electrical noise, extending the relay’s service life. The DIN-standard base allows easy installation in boiler control panels and industrial systems.

The steam boiler homopolymer relay features 1 normally open NO and 1 normally closed NC contact, offering high flexibility for various control circuits. Its operating temperature range is from minus 20 to plus 60 degrees Celsius. Low power consumption and international standard-compliant design ensure high energy efficiency. The relay is compatible with both digital and analog signals, and its mechanical lifetime exceeds 100,000 operating cycles, providing stable performance and minimizing maintenance requirements.

Iran Radiator Wall-Mounted Boiler 24000 Model BM24CF

The Iran Radiator BM24CF wall-mounted boiler, with a heating capacity of 24 kW, is designed for residential spaces up to 150 square meters. This fan-assisted, dual heat exchanger model provides stable and efficient operation with a thermal efficiency above 93 percent. The primary heat exchanger is made of pure copper with an anti-scale coating, ensuring reliable production of both domestic hot water and central heating. A three-speed Italian circulation pump and a multi-stage safety system including temperature, pressure, and exhaust sensors enhance its reliability.

The BM24CF package includes an 8-liter expansion tank and a gas valve compliant with European standard EN 437. Its automatic ignition and electronic temperature control system reduce energy consumption. The unit operates with both natural gas and LPG, supporting a maximum heating circuit pressure of 3 bar. Dimensions are 740×400×340 millimeters, and the net weight is approximately 30 kilograms. The operating noise level below 40 dB makes it suitable for indoor installation.

Iran Radiator Floor-Standing Boiler 35000 Model G35

The Iran Radiator G35 floor-standing boiler, with a heating capacity of 35 kW, is designed for residential and office spaces up to 250 square meters. This high-efficiency atmospheric burner model can be connected to radiator and underfloor heating systems. The main heat exchanger is made of gray cast iron, resistant to thermal stress and corrosion. The combustion system operates with electronic temperature control and a flame safety sensor, ensuring stable and reliable performance. An exhaust fan and thermal safety valve are key components of this model.

The G35 boiler features a 12-liter expansion tank and supports a maximum working pressure of 3 bar. Its dual-fuel capability allows operation with both natural gas and LPG, suitable for various environments. Automatic ignition and water temperature control are managed by a digital thermostat. The unit measures 850×500×600 millimeters and weighs approximately 65 kilograms. With an operating noise level below 45 dB, it is suitable for installation in a boiler room or indoor space.

Araz Sanat B500s 500,000 Steel Boiler Room Hot Water Boiler

Araz Sanat B500s steel hot water boiler has a 500,000 kcal/h thermal capacity. This unit is optimized for natural gas and diesel fuel. Its thermal efficiency exceeds 90 percent. The boilers maximum allowable working pressure is 6 bar. The main structure uses high-quality ST37 steel plates. Its three-pass, wet-back design optimizes heat transfer. The heating surface area is approximately 15 square meters. All boiler seams are controlled via non-destructive testing. This product is manufactured according to the EN 12953 standard.

The boiler is insulated with rock wool of 130 kg/m³ density. The external cladding is made from 0.7 mm galvanized sheet. Its dual-fuel burner provides precise modulation capability. The output water temperature is adjustable up to 95 degrees Celsius. The overall dimensions are approximately 280 by 130 by 130 centimeters. This model suits central heating for large commercial buildings. An advanced digital control system monitors its performance. This feature ensures operational safety and energy savings.

Turbo chauffagekar 13-fin cast iron boiler

The Turbo Shofazhkar 13-fin cast iron boiler is designed to provide heating for medium-sized residential and office spaces. Each fin is made from durable cast iron, capable of withstanding a working pressure of 6 bar and a hydrostatic test pressure of 9 bar. The average heat output per fin is approximately 2500–2700 kcal/h, providing sufficient total thermal capacity for spaces up to 120 square meters. The fin design ensures rapid and uniform heat transfer, increasing the boiler’s thermal efficiency up to 88 percent.

The 13-fin Turbo Shofazhkar cast iron boiler is compatible with underfloor heating systems and aluminum or steel radiators. Assembly uses durable bolts and washers, allowing easy replacement or maintenance of individual fins. Overall dimensions depend on installation but typically range from 900–1000 mm in length, 450 mm in width, and 600 mm in height, with an approximate weight of 110 kilograms. Heat-resistant coating and precise engineering ensure long service life and stable performance.

Araz Sanat B600s 600,000 Steel Boiler Room Hot Water Boiler

The Araz Sanat B600s steel hot water boiler has a 600,000 kcal/h thermal capacity. This unit is designed for use with natural gas. The thermal efficiency of this model exceeds 90 percent. Its standard working pressure is 6 bar. The structure is built from high-quality ST37 steel plates. A three-pass, wet-back flue design enhances efficiency. Its heat exchange surface is approximately 18 square meters. All seams are quality-controlled with radiographic testing. This product is manufactured according to the EN 12953 international standard.

The thermal insulation is rock wool with a density of 140 kg/m³. The external cladding consists of 0.8 mm galvanized sheet. A fully automatic burner with precise modulation is installed. The output water temperature is adjustable up to 95 degrees Celsius. The overall dimensions are approximately 300 by 140 by 140 centimeters. This model is highly suitable for large industrial buildings. An intelligent control system logs operational parameters. This capability optimizes fuel consumption.

Immergas Mini EOLO 28 PRO wall-mounted boiler

The Immergas Mini EOLO 28 PRO wall-mounted boiler is a dual-exchanger heating and hot water system with a 28 kW output and 92.8 percent efficiency. It features a fan-assisted modular combustion system that maintains stable performance under gas pressure as low as 5 mbar. The primary heat exchanger is copper with an anti-scale coating, while the secondary is stainless steel. The unit delivers 13.2 liters of domestic hot water per minute at 35°C and operates at a maximum pressure of 3 bar. The heating circuit temperature reaches up to 80°C, and domestic hot water up to 60°C.

This boiler includes multiple safety systems such as anti-freeze protection, flame control, and overheat protection. Its digital display provides accurate operation status and error codes. Operating noise is below 38 dB, making it ideal for residential use. The unit measures 730×400×290 mm and weighs approximately 33 kg. Mini EOLO 28 PRO supports smart thermostats and remote control systems for enhanced energy management and comfort.

Turbo chauffagekar 15-fin cast iron boiler

The Turbo Shofazhkar 15-fin cast iron boiler is designed to provide heating for large residential and office spaces. Each fin is made from durable cast iron, capable of withstanding a working pressure of 6 bar and a hydrostatic test pressure of 9 bar. The average heat output per fin is approximately 2500–2700 kcal/h, providing sufficient total thermal capacity for spaces up to 150 square meters. The fin design ensures rapid and uniform heat transfer, increasing the boiler’s thermal efficiency up to 88 percent.

The 15-fin Turbo Shofazhkar cast iron boiler is compatible with underfloor heating systems and aluminum or steel radiators. Assembly uses durable bolts and washers, allowing easy replacement or maintenance of individual fins. Overall dimensions depend on installation but typically range from 1000–1100 mm in length, 450 mm in width, and 600 mm in height, with an approximate weight of 130 kilograms. Heat-resistant coating and precise engineering ensure long service life and stable performance.

chauffagekar Solar 400 10-fin cast iron hot water boiler

The Shofazhkar Solar 400 10-fin cast iron hot water boiler is designed for medium-sized residential and office heating applications. Each fin is made of durable cast iron, capable of withstanding a working pressure of 6 bar and a hydrostatic test pressure of 9 bar. The average heat output per fin is approximately 2800 kcal/h, providing sufficient total thermal capacity for spaces up to 100 square meters. The fin design ensures fast and uniform heat transfer, achieving up to 88 percent thermal efficiency.

The Solar 400 cast iron boiler is compatible with aluminum and steel radiators as well as underfloor heating systems. Fins are assembled using durable bolts and washers, allowing easy replacement or maintenance of individual sections. Overall dimensions depend on installation but typically range from 800–950 mm in length, 450 mm in width, and 600 mm in height, with an approximate weight of 95 kilograms. Heat-resistant coating and precise engineering ensure long service life and reliable performance.

Turbo chauffagekar 14-fin cast iron boiler

The Turbo Shofazhkar 14-fin cast iron boiler is designed for heating medium to large residential and office spaces. Each fin is made of durable cast iron, capable of withstanding a working pressure of 6 bar and a hydrostatic test pressure of 9 bar. The average heat output per fin is approximately 2500–2700 kcal/h, providing sufficient total thermal capacity for spaces up to 140 square meters. The fin design ensures fast and uniform heat transfer, increasing the boiler’s thermal efficiency up to 88 percent.

The 14-fin Turbo Shofazhkar cast iron boiler is compatible with underfloor heating systems and aluminum or steel radiators. Fins are assembled using durable bolts and washers, allowing easy replacement or maintenance of individual sections. Overall dimensions typically range from 950–1050 mm in length, 450 mm in width, and 600 mm in height, with an approximate weight of 120 kilograms. Heat-resistant coating and precise engineering ensure long service life and stable performance.

Araz Sanat B900s 900,000 Steel Boiler Room Hot Water Boiler

Araz Sanat B900s steel hot water boiler has a 900,000 kcal/h thermal capacity. This unit is designed for natural gas with 92.5% efficiency. The boilers maximum allowable working pressure reaches 10 bar. The main structure uses high-quality ST52-3 steel plates. Its four-pass, wet-back design optimizes heat transfer. The heating surface area is approximately 28 square meters. All boiler seams undergo advanced non-destructive testing. This product is manufactured according to EN 12953 Part 7 standard.

The boiler is insulated with rock wool of 160 kg/m³ density. The external cladding is made from 1.2 mm galvanized sheet. Its dual-fuel burner features full modulation capability. The output water temperature is adjustable up to 120 degrees Celsius. The overall dimensions are approximately 350 by 180 by 180 centimeters. This model suits central heating for refinery complexes. The digital control system monitors all operational parameters. This feature ensures operational safety and energy conservation.

Iran Radiator Wall-Mounted Boiler 28000 Model L28CF

The Iran Radiator L28CF wall-mounted boiler, with a heating capacity of 28 kW, is designed for residential areas up to 180 square meters. This fan-assisted, dual heat exchanger model provides 93 percent thermal efficiency. The primary copper heat exchanger with anti-scale coating and a stainless steel secondary exchanger ensure continuous hot water supply. A three-speed circulation pump, anti-freeze protection, and safety sensors for temperature, pressure, and exhaust contribute to stable performance and system reliability.

The L28CF boiler features an 8-liter expansion tank and a maximum working pressure of 3 bar. Its electronic ignition and intelligent temperature control system minimize energy consumption. The unit operates with both natural gas and LPG and includes a gas valve compliant with European EN 437 standards. Dimensions are 750×400×340 millimeters with an approximate weight of 31 kilograms. The operating noise level below 40 dB allows quiet and comfortable indoor installation.

chauffagekar Super Heat 1300 18-fin cast iron boiler

The Shofazhkar Super Heat 1300 18-fin cast iron boiler is designed for heating large residential and industrial spaces. Each fin is made of durable cast iron, capable of withstanding a working pressure of 6 bar and a hydrostatic test pressure of 9 bar. The average heat output per fin is approximately 3500 kcal/h, providing substantial total thermal capacity for spaces up to 250 square meters. The fin design ensures fast and uniform heat transfer, achieving up to 88 percent thermal efficiency.

The 18-fin Super Heat 1300 cast iron boiler is compatible with aluminum and steel radiators as well as underfloor heating systems. Fins are assembled using durable bolts and washers, allowing easy replacement or maintenance of individual sections. Overall dimensions typically range from 1200–1300 mm in length, 600 mm in width, and 750 mm in height, with an approximate weight of 220 kilograms. Heat-resistant coating and precise engineering ensure long service life and stable performance.

Araz Sanat B700s 700,000 kcal/h Steel Boiler Room Hot Water Boiler

Araz Sanat B700s steel hot water boiler has a 700,000 kcal/h thermal capacity. This unit is designed for natural gas with 91.5% efficiency. The boilers maximum allowable working pressure is 8 bar. The main structure uses high-quality ST44 steel plates. Its three-pass, wet-back design optimizes heat transfer. The heating surface area is approximately 21 square meters. All boiler seams are controlled via radiographic testing. This product is manufactured according to EN 12953 Part 5 standard.

The boiler is insulated with rock wool of 140 kg/m³ density. The external cladding is made from 0.8 mm galvanized sheet. Its dual-fuel burner features a smart control system. The output water temperature is adjustable up to 100 degrees Celsius. The overall dimensions are approximately 300 by 150 by 150 centimeters. This model suits central heating for industrial complexes. A digital PID control system monitors operational parameters. This feature ensures operational safety and energy savings.

chauffagekar Super 300 9-fin cast iron boiler

The Shofazhkar Super 300 9-fin cast iron boiler is designed for heating small to medium-sized residential and office spaces. Each fin is made of durable cast iron, capable of withstanding a working pressure of 6 bar and a hydrostatic test pressure of 9 bar. The average heat output per fin is approximately 2500–2700 kcal/h, providing sufficient total thermal capacity for spaces up to 90 square meters. The fin design ensures fast and uniform heat transfer, achieving up to 88 percent thermal efficiency.

The 9-fin Super 300 cast iron boiler is compatible with aluminum and steel radiators as well as underfloor heating systems. Fins are assembled using durable bolts and washers, allowing easy replacement or maintenance of individual sections. Overall dimensions range from 700–850 mm in length, 450 mm in width, and 600 mm in height, with an approximate weight of 85 kilograms. Heat-resistant coating and precise engineering ensure long service life and reliable performance.

Araz Sanat B800s 800,000 Steel Boiler Room Hot Water Boiler

Araz Sanat B800s steel hot water boiler has an 800,000 kcal/h thermal capacity. This unit is designed for natural gas with 92% efficiency. The boilers maximum allowable working pressure is 8 bar. The main structure uses high-quality ST52 steel plates. Its three-pass, wet-back design optimizes heat transfer. The heating surface area is approximately 24 square meters. All boiler seams are controlled via ultrasonic testing. This product is manufactured according to EN 12953 Part 6 standard.

The boiler is insulated with rock wool of 150 kg/m³ density. The external cladding is made from 1.0 mm galvanized sheet. Its dual-fuel burner features continuous modulation system. The output water temperature is adjustable up to 110 degrees Celsius. The overall dimensions are approximately 320 by 160 by 160 centimeters. This model suits central heating for large factories. An advanced digital PID control system monitors parameters. This feature ensures operational safety and energy savings.

Iran Radiator ECO24FF wall-mounted boiler

The Iran Radiator ECO24FF wall-mounted boiler, with a thermal capacity of 24 kW, is designed for residential units up to 120–150 square meters. This fan-assisted, dual heat exchanger model offers about 92 percent thermal efficiency. The primary copper heat exchanger with anti-scale coating and the stainless steel secondary exchanger ensure reliable and continuous hot water production. Key features include a three-speed circulation pump, anti-freeze protection, automatic temperature control, and a multi-level safety system.

The ECO24FF boiler includes an 8-liter expansion tank and supports a maximum working pressure of 3 bar. Its combustion system uses electronic ignition and flame control via ionization sensor. The unit operates with both natural gas and LPG, providing efficient fuel consumption and a low noise level below 38 dB. The dimensions are 730×400×330 millimeters with an approximate weight of 29 kilograms, allowing easy and compact wall installation.

chauffagekar Solar 11-400 cast iron boiler with 11 fins

The Shofazhkar Solar 11-400 cast iron boiler with 11 fins is designed for heating medium-sized residential and office spaces. Each fin is made of durable cast iron, capable of withstanding a working pressure of 6 bar and a hydrostatic test pressure of 9 bar. The average heat output per fin is approximately 2800 kcal/h, providing sufficient total thermal capacity for spaces up to 110 square meters. The fin design ensures fast and uniform heat transfer, achieving up to 88 percent thermal efficiency.

The 11-fin Solar 400 cast iron boiler is compatible with aluminum and steel radiators as well as underfloor heating systems. Fins are assembled using durable bolts and washers, allowing easy replacement or maintenance of individual sections. Overall dimensions range from 850–950 mm in length, 450 mm in width, and 600 mm in height, with an approximate weight of 100 kilograms. Heat-resistant coating and precise engineering ensure long service life and reliable performance.

chauffagekar Solar 300 6-fin cast iron boiler

The Shofazhkar Solar 300 6-fin cast iron boiler is designed for heating small to medium-sized residential spaces. Each fin is made of durable cast iron, capable of withstanding a working pressure of 6 bar and a hydrostatic test pressure of 9 bar. The average heat output per fin is approximately 2500–2700 kcal/h, providing sufficient total thermal capacity for spaces up to 60 square meters. The fin design ensures fast and uniform heat transfer, achieving up to 88 percent thermal efficiency.

The 6-fin Solar 300 cast iron boiler is compatible with aluminum and steel radiators as well as underfloor heating systems. Fins are assembled using durable bolts and washers, allowing easy replacement or maintenance of individual sections. Overall dimensions range from 550–700 mm in length, 450 mm in width, and 600 mm in height, with an approximate weight of 60 kilograms. Heat-resistant coating and precise engineering ensure long service life and reliable performance.

chauffagekar Super 400 9-fin cast iron boiler

The Shofazhkar Super 400 9-fin cast iron boiler is designed for heating small to medium-sized residential and office spaces. Each fin is made of durable cast iron, capable of withstanding a working pressure of 6 bar and a hydrostatic test pressure of 9 bar. The average heat output per fin is approximately 2800 kcal/h, providing sufficient total thermal capacity for spaces up to 90 square meters. The fin design ensures fast and uniform heat transfer, achieving up to 88 percent thermal efficiency.

The 9-fin Super 400 cast iron boiler is compatible with aluminum and steel radiators as well as underfloor heating systems. Fins are assembled using durable bolts and washers, allowing easy replacement or maintenance of individual sections. Overall dimensions range from 700–850 mm in length, 450 mm in width, and 600 mm in height, with an approximate weight of 85 kilograms. Heat-resistant coating and precise engineering ensure long service life and reliable performance.

chauffagekar Solar 400 10-fin cast iron boiler

The Shofazhkar Solar 400 10-fin cast iron boiler is designed for heating medium-sized residential and office spaces. Each fin is made of durable cast iron, capable of withstanding a working pressure of 6 bar and a hydrostatic test pressure of 9 bar. The average heat output per fin is approximately 2800 kcal/h, providing sufficient total thermal capacity for spaces up to 100 square meters. The fin design ensures fast and uniform heat transfer, achieving up to 88 percent thermal efficiency.

The 10-fin Solar 400 cast iron boiler is compatible with aluminum and steel radiators as well as underfloor heating systems. Fins are assembled using durable bolts and washers, allowing easy replacement or maintenance of individual sections. Overall dimensions range from 800–950 mm in length, 450 mm in width, and 600 mm in height, with an approximate weight of 95 kilograms. Heat-resistant coating and precise engineering ensure long service life and reliable performance.

chauffagekar Super 500 5-fin cast iron boiler

The Shofazhkar Super 500 5-fin cast iron boiler is designed for heating medium-sized residential and office spaces. Each fin is made of durable cast iron, capable of withstanding a working pressure of 6 bar and a hydrostatic test pressure of 9 bar. The average heat output per fin is approximately 3000 kcal/h, providing sufficient total thermal capacity for spaces up to 60 square meters. The fin design ensures fast and uniform heat transfer, achieving up to 88 percent thermal efficiency.

The 5-fin Super 500 cast iron boiler is compatible with aluminum and steel radiators as well as underfloor heating systems. Fins are assembled using durable bolts and washers, allowing easy replacement or maintenance of individual sections. Overall dimensions range from 550–700 mm in length, 500 mm in width, and 650 mm in height, with an approximate weight of 65 kilograms. Heat-resistant coating and precise engineering ensure long service life and reliable performance.

chauffagekar Super 500 6-fin cast iron boiler

The Shofazhkar Super 500 6-fin cast iron boiler is designed for heating medium-sized residential and office spaces. Each fin is made of durable cast iron, capable of withstanding a working pressure of 6 bar and a hydrostatic test pressure of 9 bar. The average heat output per fin is approximately 3000 kcal/h, providing sufficient total thermal capacity for spaces up to 70 square meters. The fin design ensures fast and uniform heat transfer, achieving up to 88 percent thermal efficiency.

The 6-fin Super 500 cast iron boiler is compatible with aluminum and steel radiators as well as underfloor heating systems. Fins are assembled using durable bolts and washers, allowing easy replacement or maintenance of individual sections. Overall dimensions range from 600–750 mm in length, 500 mm in width, and 650 mm in height, with an approximate weight of 70 kilograms. Heat-resistant coating and precise engineering ensure long service life and reliable performance.

Immergas EOLO MYTHOS PRO 24 wall-mounted boiler

The Immergas EOLO MYTHOS PRO 24 wall-mounted boiler is a double heat exchanger heating system with 93 percent thermal efficiency and a 24 kW output capacity. It features a modular burner with electronic control and a fan-assisted combustion system ensuring stable performance under gas pressure as low as 5 mbar. The primary heat exchanger is made of copper with an anti-corrosion coating, while the secondary exchanger is stainless steel. The heating circuit operates at 3 bar pressure and delivers 11.5 liters of domestic hot water per minute at 35°C.

This model includes anti-freeze protection, over-temperature safety, and automatic combustion control. Its digital display shows operational status and error codes. The unit operates at a minimum noise level of 38 dB, ideal for residential use. With dimensions of 740×420×250 mm and a weight of approximately 32 kg, EOLO MYTHOS PRO 24 offers a compact design and compatibility with smart room thermostats.

chauffagekar Super 400 11-fin cast iron boiler

The Shofazhkar Super 400 11-fin cast iron boiler is designed for heating medium-sized residential and office spaces. Each fin is made of durable cast iron, capable of withstanding a working pressure of 6 bar and a hydrostatic test pressure of 9 bar. The average heat output per fin is approximately 2800 kcal/h, providing sufficient total thermal capacity for spaces up to 110 square meters. The fin design ensures fast and uniform heat transfer, achieving up to 88 percent thermal efficiency.

The 11-fin Super 400 cast iron boiler is compatible with underfloor heating systems and aluminum or steel radiators. Fins are assembled using durable bolts and washers, allowing easy replacement or maintenance of individual sections. Overall dimensions range from 850–950 mm in length, 450 mm in width, and 600 mm in height, with an approximate weight of 100 kilograms. Heat-resistant coating and precise engineering ensure long service life and reliable performance.

chauffagekar Solar 300 5-fin cast iron boiler

The Shofazhkar Solar 300 5-fin cast iron boiler is designed for heating small residential spaces. Each fin is made of durable cast iron, capable of withstanding a working pressure of 6 bar and a hydrostatic test pressure of 9 bar. The average heat output per fin is approximately 2500–2700 kcal/h, providing sufficient total thermal capacity for spaces up to 50 square meters. The fin design ensures fast and uniform heat transfer, achieving up to 88 percent thermal efficiency.

The 5-fin Solar 300 cast iron boiler is compatible with aluminum and steel radiators as well as underfloor heating systems. Fins are assembled using durable bolts and washers, allowing easy replacement or maintenance of individual sections. Overall dimensions range from 500–650 mm in length, 450 mm in width, and 600 mm in height, with an approximate weight of 55 kilograms. Heat-resistant coating and precise engineering ensure long service life and reliable performance.

chauffagekar Super 7-400 cast iron boiler

The Shofazhkar Super 7-400 cast iron boiler is designed for heating small to medium-sized residential spaces. It features 7 durable cast iron fins, capable of withstanding a working pressure of 6 bar and a hydrostatic test pressure of 9 bar. The average heat output per fin is approximately 2800 kcal/h, providing sufficient total thermal capacity for spaces up to 70 square meters. The fin design ensures fast and uniform heat transfer, achieving up to 88 percent thermal efficiency.

The Super 7-400 cast iron boiler is compatible with aluminum and steel radiators as well as underfloor heating systems. Fins are assembled using durable bolts and washers, allowing easy replacement or maintenance of individual sections. Overall dimensions range from 600–750 mm in length, 450 mm in width, and 600 mm in height, with an approximate weight of 70 kilograms. Heat-resistant coating and precise engineering ensure long service life and reliable performance.

chauffagekar Super 400 5-fin cast iron boiler

The Shofazhkar Super 400 5-fin cast iron boiler is designed for heating small residential spaces. Each fin is made of durable cast iron, capable of withstanding a working pressure of 6 bar and a hydrostatic test pressure of 9 bar. The average heat output per fin is approximately 2800 kcal/h, providing sufficient total thermal capacity for spaces up to 50 square meters. The fin design ensures fast and uniform heat transfer, achieving up to 88 percent thermal efficiency.

The 5-fin Super 400 cast iron boiler is compatible with aluminum and steel radiators as well as underfloor heating systems. Fins are assembled using durable bolts and washers, allowing easy replacement or maintenance of individual sections. Overall dimensions range from 500–650 mm in length, 450 mm in width, and 600 mm in height, with an approximate weight of 55 kilograms. Heat-resistant coating and precise engineering ensure long service life and reliable performance.

chauffagekar Super 400 6-fin cast iron boiler

The Shofazhkar Super 400 6-fin cast iron boiler is designed for heating small residential spaces. Each fin is made of durable cast iron, capable of withstanding a working pressure of 6 bar and a hydrostatic test pressure of 9 bar. The average heat output per fin is approximately 2800 kcal/h, providing sufficient total thermal capacity for spaces up to 60 square meters. The fin design ensures fast and uniform heat transfer, achieving up to 88 percent thermal efficiency.

The 6-fin Super 400 cast iron boiler is compatible with underfloor heating systems and aluminum or steel radiators. Fins are assembled using durable bolts and washers, allowing easy replacement or maintenance of individual sections. Overall dimensions range from 550–700 mm in length, 450 mm in width, and 600 mm in height, with an approximate weight of 60 kilograms. Heat-resistant coating and precise engineering ensure long service life and reliable performance.