Pipe Iran

PVC and UPVC Pipe

PVC polyvinyl chloride pipe made in Iran is resistant but lightweight, it is so flexible and it has plastic properties.
UPVC UN plasticized polyvinyl chloride the same PVC that is non-plastic and hard.
PVC is an alternative to aluminum and copper pipes and UPVC is a replacement for wood in construction.

PVC and UPVC pipes made in Iran are widely used in water supply, drainage, sewage systems, agricultural irrigation, and building infrastructure. Iranian manufacturers produce polyvinyl chloride (PVC) and unplasticized polyvinyl chloride (UPVC) pipes in various diameters, wall thicknesses, lengths, and pressure ratings to meet different construction and industrial requirements. These pipes offer several advantages, including corrosion resistance, low weight, smooth internal surfaces, easy installation, and reduced maintenance requirements compared with many traditional piping materials. Depending on their specifications, PVC and UPVC pipes can be supplied for pressurized cold-water distribution, underground drainage, wastewater transportation, and electrical cable protection. Important purchasing criteria include nominal diameter, wall thickness, pressure class, ring stiffness, connection type, and compliance with applicable technical standards. Iranian-made PVC and UPVC pipes

Polyethylene pipe PE80, PE100

Polyethylene pipes have their own specif characteristics and they divided into PE63, PE80 and PE100 in Iran.
The PE100 pipe made in Iran has more density than the PE80 pipe therefore the PE80 pipe will weigh more and be more expensive than the PE100 pipe.
PE100 is the newest type of raw material in Iran that can withstand even more pressure and it has naturally high resistance to crack growth.

Polyethylene pipes PE80 and PE100 made in Iran are widely used in drinking water distribution, gas networks, agricultural irrigation, wastewater systems, and industrial fluid transportation. Manufactured from high-density polyethylene (HDPE), these pipes offer excellent corrosion resistance, flexibility, impact resistance, and reliable performance in underground installations. The main difference between PE80 and PE100 is their minimum required strength (MRS): PE80 has an MRS of 8 MPa, while PE100 has an MRS of 10 MPa. This higher strength allows PE100 pipes to achieve greater pressure capacity or reduced wall thickness compared with PE80 pipes of the same diameter under equivalent design conditions. Iranian manufacturers supply polyethylene pipes in various nominal outside diameters, wall thicknesses, and standard dimension ratios (SDR) to meet different project requirements. Common a

Push Fit and Pipe Connections

Pipe connections, the pieces are that their application is changing direction, connecting two pipes to each other etc...in the pipeline route.
You can make connection very fast with push-fit fittings with lowest time consuming in Iran.

Push Fit and pipe connections made in Iran provide practical solutions for water supply, plumbing, heating, drainage, and industrial piping systems. Iranian manufacturers produce a variety of fittings, including straight couplings, elbows, tees, reducers, adapters, and transition connectors designed for different pipe diameters and installation requirements. Depending on the application, these products can be manufactured from PVC, UPVC, polypropylene, polyethylene, brass, and other compatible materials. Push Fit connections are designed to simplify installation through a push-in mechanism that secures compatible pipes without conventional threading or welding, although specific connection designs may require additional locking or preparation procedures. Key technical specifications include pipe diameter, operating pressure, temperature resistance, sealing performance, chemical compatibility, and material durability. Iranian-made Push Fit fittings and pipe connectors are suitable for residential construction, commercial buildings, agricultural

Exporting PE pipes from Iran to Iraq

The export of polyethylene pipes from Iran to Iraq is considered a vital activity in the infrastructure and water sectors, as Iranian pipes are known for their high manufacturing quality and excellent durability, making them ideal for transporting water, sewage, and gas. These pipes are available in various diameters and sizes to meet the needs of different projects, ranging from small pipes for residential use to large pipes for major industrial and engineering projects. They are manufactured from high-quality polyethylene materials, resistant to corrosion, chemical exposure, and high pressure, ensuring long-lasting and reliable performance under various environmental and climatic conditions.

Iranian polyethylene pipe exports also feature precise technical specifications, including wall thickness, allowable operating pressure, and maximum temperature, making them suitable for a wide range of engineering applications. Iranian companies also offer multiple options in terms of diameters and lengths to facilitate installation and operation in various projects, whether for urban water networks, agricultural irrigation systems, or gas pipelines. Thanks to this high quality and reliability, Iranian polyethylene pipes enjoy an excellent reputation in the Iraqi market, enhancing oppor

Poliran Polyethylene Pipe

The Poliran polyethylene pipe is manufactured from high-density polyethylene grades PE100 and PE80 with a density ranging from 0.950 to 0.955 g/cm³. These pipes are designed for various working pressures between 4 and 25 bar and operate reliably within a temperature range of 0 to 40°C. The tensile strength of the material is approximately 25 MPa, and the linear expansion coefficient is 0.18 mm/m per °C. The uniform structure and smooth inner surface reduce pressure losses and enhance fluid transmission efficiency. Poliran polyethylene pipes are widely used in water supply networks, sewage systems, and pressurized irrigation applications.

The inner surface of these pipes is extremely smooth, with a roughness coefficient of approximately 0.007, minimizing frictional flow loss. They are produced in diameters from 16 to 400 mm and connected using butt-weld or electrofusion methods. Their excellent resistance to corrosion, crack formation, and UV radiation ensures a service life exceeding 50 years. The production of these pipes complies with ISIRI 14427 and ISO 4427 standards, guaranteeing quality, strength, and dimensional consistency under diverse operating conditions.

Poliran 45-Degree Reducing Tee Polyethylene Pipe

The Poliran 45-degree reducing tee is manufactured from high-density polyethylene grade PE100 with an approximate density of 0.955 g/cm³. This fitting is designed to redirect flow and connect pipes of different diameters at a 45-degree angle in water supply, sewage, and pressurized irrigation systems. Its tensile strength is approximately 25 MPa, and impact resistance exceeds 10 kJ/m². The operating temperature range is 0 to 40°C, with nominal pressure varying from 6 to 16 bar depending on the model. Precisely engineered angles and wall thickness reduce pressure loss and ensure uniform flow distribution.

Poliran 45-degree reducing tees are produced in butt-weld and electrofusion types, available in diameters from 32 to 400 mm. The butt-weld version is installed using heat fusion, providing complete sealing and high mechanical strength. Excellent resistance to corrosion, cracking, and UV radiation ensures a service life exceeding 50 years under normal operating conditions. Manufacturing complies with ISIRI 14427 and ISO 4427 standards, guaranteeing quality, dimensional accuracy, and full compatibility with Poliran polyethylene pipes.

Poliran HDPE 10Bar Polyethylene Pipe

The Poliran HDPE 10bar pipe is manufactured from high-density polyethylene grade PE100 with an approximate density of 0.955 g/cm³. It is designed to withstand a working pressure of 10 bar and operates efficiently in a temperature range of 0 to 40°C. Its tensile strength is around 26 MPa, and the elastic modulus is close to 1000 MPa. The pipe’s linear expansion coefficient is about 0.18 mm/m per °C, and it offers excellent resistance to UV radiation and chemical corrosion. These properties make it suitable for municipal water transmission, sewage, and pressurized irrigation systems.

The inner surface of the Poliran HDPE pipe is extremely smooth, with a roughness coefficient of approximately 0.007, minimizing pressure loss in flow. It is produced in diameters ranging from 20 to 400 mm and lengths of 6 or 12 meters. The connection method includes butt-welding or electrofusion joints, allowing the pipe to withstand impacts at temperatures down to –20°C. The Poliran HDPE 10bar pipe complies with ISO 4427 and ISIRI 14427 standards and offers a service life exceeding 50 years under normal operating conditions.

Poliran 90 Degree Reducing Tee Polyethylene Pipe

The Poliran 90-degree reducing tee is manufactured from high-density polyethylene grade PE100 with an approximate density of 0.955 g/cm³. It is designed to redirect flow and connect pipes of different diameters at a right angle. The material’s tensile strength is approximately 25 MPa, and impact resistance exceeds 10 kJ/m². Its operating temperature range is 0 to 40°C, and nominal pressure varies from 6 to 16 bar depending on the model. Precisely engineered angles and uniform wall thickness minimize pressure loss and ensure uniform flow distribution within the network.

Poliran 90-degree reducing tees are available in butt-weld and electrofusion types, covering diameters from 32 to 400 mm. The butt-weld type is installed using heat fusion, providing complete sealing and high mechanical strength. Excellent resistance to corrosion, cracking, and UV radiation ensures a service life exceeding 50 years under normal operating conditions. Manufacturing complies with ISIRI 14427 and ISO 4427 standards, guaranteeing dimensional accuracy, consistent quality, and full compatibility with Poliran polyethylene pipes.

Pipe Lifting Hook

The pipe lifting hook, also known as a fish hook with handle, is an industrial tool designed for safe lifting and moving of pipes, profiles, and heavy sections in workshops and industrial environments. It is made from alloy steel with tensile strength of 600–900 MPa and surface hardness of 35–45 HRC. Load capacity typically ranges from 500 kg to 5 tons. The hook opening is adjustable from 30 to 120 millimeters depending on pipe size. The handle provides better control and increased operator safety during lifting.

Structurally, the handle-equipped hook has a one-piece, durable body with polished or galvanized surface for wear and corrosion resistance. The handle is made of hardened steel or lightweight alloy, allowing easy handling. The attachment point to chains or wire ropes is reinforced with bushings or rings to prevent load drop. This hook is widely used in oil, gas, petrochemical, steel, and pipeline industries, providing stable operation at temperatures from −20°C to +150°C. The fish-shaped tip prevents slippage and damage to pipes.

Poliran LDPE Polyethylene Pipe

The Poliran LDPE pipe is manufactured from low-density polyethylene grade PE32 or PE40 with an approximate density of 0.922 g/cm³. This pipe offers excellent flexibility, light weight, and good resistance to cracking. Its operating temperature range is between 0 and 40°C, with a typical working pressure of 2.5 to 4 bar. The elastic modulus of the pipe is about 200–250 MPa, and its linear expansion coefficient is 0.20 mm/m per °C. Due to its soft and resilient structure, this product is widely used in drip irrigation and light agricultural systems.

The inner surface of the Poliran LDPE pipe is extremely smooth with a roughness coefficient of around 0.009, reducing hydraulic pressure loss. It is produced in diameters of 16, 20, and 25 mm and can be easily installed using compression or threaded fittings. Its strong resistance to UV radiation and agricultural chemicals extends its service life to more than 15 years. The manufacturing standards of this pipe comply with ISIRI 7607 and ISO 4427, ensuring consistent quality and dimensional accuracy.

pipe

The 3 meter tower concrete pump pipes are designed for vertical and high-rise concrete transfer applications. These pipes are manufactured from wear-resistant alloy steel containing chromium and manganese. The standard internal diameter ranges from 100 to 150 millimeters. Wall thickness varies between 4 and 8 millimeters, with operating pressure resistance up to 130 bar. The inner surface is induction heat treated to achieve hardness between 55 and 65 HRC. Flanged or locking coupling connections ensure fast and leak-free installation.

Structurally, each pipe section has an exact length of 3000 millimeters with tolerance below 2 millimeters. An external anti-corrosion coating improves durability in humid and job site conditions. Depending on thickness, each section weighs between 70 and 110 kilograms. The straight uniform design minimizes pressure loss during pumping. Compatibility with elbows and end hoses is maintained without reducing efficiency. These pipes are manufactured in compliance with ISO 21573 standards for safe concrete pumping.

exporting PE pipe from Iran to Turkmenistan

The export of polyethylene PE pipes from Iran to Turkmenistan has shown steady growth due to their high demand in water supply, sewage, gas distribution, and irrigation systems. Iranian manufacturers produce these pipes in accordance with international standards such as ISO, DIN, and ASTM, ensuring high strength, flexibility, and corrosion resistance. Polyethylene pipes feature a low friction coefficient, which enhances flow capacity and extends the service life of pipelines under the challenging climatic conditions of Turkmenistan.

Iranian polyethylene PE pipes come in a wide range of diameters and wall thicknesses, making them suitable for both urban and industrial networks of various purposes. Thanks to their high chemical resistance and UV stability, these pipes require minimal maintenance and offer long-term durability. Their compactness, ease of installation, and cost-effectiveness make Iranian PE pipes an optimal solution for the modernization and construction of modern water and gas distribution systems in Turkmenistan.

pipe

The 3-meter Schwing concrete pump pipe is made of stainless steel and complies with international standards. It has an inner diameter of 125 mm and a wall thickness of 6 mm, providing high resistance to concrete pressure. Its design ensures smooth concrete transfer with minimal pressure drop and no blockage. The pipes are manufactured with seamless welds that perform well under tough conditions, including high-pressure or elevated pouring. The pipe connection system is designed according to industry standards for safety and high efficiency.

The Schwing concrete pump pipes are designed to withstand pressures up to 85 bar. Each pipe is 3 meters long and weighs approximately 90 kg, making it easy to handle and install. These pipes are equipped with a wear-resistant coating, ensuring extended durability. Their innovative design reduces the need for frequent maintenance and repairs. As a result, these pipes are an ideal choice for large and complex concrete pouring projects, including construction and civil engineering works.

Pipe Cutter and Rail Cutter

The pipe cutter is a precision industrial tool for cutting metal and plastic pipes. It is typically manufactured with cutting diameters ranging from 10 to 600 millimeters. The cutting guidance system is highly accurate and uses hardened steel blades. An electric motor with 0.5 to 5 HP provides continuous and uniform cutting. Cutting speed is adjustable and ensures a smooth, burr-free surface. The body is made of high-strength steel with anti-corrosion coating. Mechanical safety factors comply with industrial standards.

The rail cutter is an industrial device designed for precision cutting of steel rails. Cutting capacity typically ranges from 25 to 65 kg/cm². The cutting system includes an industrial gearbox and hardened steel blade. Power is supplied by an electric motor or hydraulic system. The device is designed to hold the rail firmly in place without slipping. The robust housing with anti-corrosion coating extends service life. Each unit undergoes load testing and functional inspection prior to delivery.

Pipe Lifting Hook

The pipe lifting hook, also known as a fish hook without handle, is an industrial tool designed for safely lifting and moving pipes, profiles, and heavy sections. It is made from alloy steel with tensile strength of 600–900 MPa and surface hardness of 35–45 HRC. Load capacity typically ranges from 500 kg to 5 tons. The hook opening is adjustable from 30 to 120 millimeters depending on pipe diameter. The fish-shaped tip ensures secure grip and uniform force distribution along the pipe.

Structurally, the hook features a one-piece, durable body with polished or galvanized surface for enhanced wear and corrosion resistance. The attachment point to chains or wire ropes is reinforced with metal bushings or rings to ensure safe lifting. The hook is designed for use in oil, gas, petrochemical, steel, and pipeline industries, providing stable operation at temperatures from −20°C to +150°C. Its engineered tip prevents slippage and damage to pipes.