Suggestions

Granite Iran

Cellphone / Whatsapp: +989122003350

Search Results For Granite

ASRON Granite and Ceramic Cutting Disc

The ASRON cutting disc is made with synthetic diamond particles of grade SDC 1200. Diamond concentration at the cutting edge reaches 4000 particles per square centimeter. Standard disc diameters range from 105 to 350 mm for industrial applications. Disc thickness is maintained between 2.2 to 3.2 mm with a tolerance of ±0.05 mm. The core uses spring steel with a double-layer anti-corrosion coating. The segment bond is a porous cobalt-bronze matrix for rapid heat dissipation. The maximum permissible operating speed is 85 meters per second. This disc is designed for cutting granite with Mohs 7 hardness and porcelain ceramic.

The disc structure features laser-cut wave-shaped gullets to minimize vibration. This pattern reduces operational noise by up to 15 decibels. The number of segments varies from 16 to 36 depending on diameter. Diamond segment height is 7 to 10 mm for extended service life. A nickel-chromium coating on the body prevents rust and material adhesion. The disc balance quality is Grade G 6.3 according to ISO 1940 standards. It delivers optimal performance on wet cut machines with minimum 2200-watt power. Cutting results show clean, chip-free edges with ±0.2 mm accuracy. The discs effective life reaches 3000 linear meters of cutting in granite.


jahanborsh

jahanborsh

Iran

Pneumatic Tile and Granite Cutter

These pneumatic tools operate on 6 to 8 bar compressed air. Required air flow varies between 250 to 400 liters per minute. The air turbine motor runs at a free speed of 10,000 to 20,000 RPM. It produces an output power equivalent to 1.5 to 3 mechanical horsepower. The starting system uses a slide valve with automatic greasing. Tool weight is designed between 2.5 to 4.5 kg to reduce operator fatigue. Noise level is kept below 85 dB with a special exhaust. These tools are compatible with dry/wet diamond blades up to 300 mm diameter.

The housing is made from lightweight magnesium or aluminum alloy with a wear-resistant coating. An ergonomic handle with a 15-degree angle ensures better visibility and control. The internal suspension uses ceramic bearings with a 1000-hour service life. The throttle control is an adjustable, high-sensitivity lever. An in-line filter-regulator-lubricator FRL unit is essential. The cutter can achieve cut depths up to 120 mm in a single pass. Handle vibration is reduced to less than 2.5 m/s². Safety is provided by an automatic brake when the trigger is released.