Pneumatic Tile and Granite Cutter , Iran

These pneumatic tools operate on 6 to 8 bar compressed air. Required air flow varies between 250 to 400 liters per minute. The air turbine motor runs at a free speed of 10,000 to 20,000 RPM. It produces an output power equivalent to 1.5 to 3 mechanical horsepower. The starting system uses a slide valve with automatic greasing. Tool weight is designed between 2.5 to 4.5 kg to reduce operator fatigue. Noise level is kept below 85 dB with a special exhaust. These tools are compatible with dry/wet diamond blades up to 300 mm diameter.

The housing is made from lightweight magnesium or aluminum alloy with a wear-resistant coating. An ergonomic handle with a 15-degree angle ensures better visibility and control. The internal suspension uses ceramic bearings with a 1000-hour service life. The throttle control is an adjustable, high-sensitivity lever. An in-line filter-regulator-lubricator FRL unit is essential. The cutter can achieve cut depths up to 120 mm in a single pass. Handle vibration is reduced to less than 2.5 m/s². Safety is provided by an automatic brake when the trigger is released.You can order and buy Pneumatic Tile and Granite Cutter from Iran by contacting us through whatsaap and email.
WEBSITE: Pneumatic Tile and Granite Cutter Iran