Band

Bando DXL Timing Belt

The Bando DXL timing belt is manufactured from neoprene rubber reinforced with glass fiber and polyester cords, providing high tensile strength and excellent dimensional stability. The standard pitch of the belt teeth ranges from 2.5 to 10 millimeters, and their surface is coated with nylon fabric to reduce friction and wear. The tensile strength of the belt is in the range of 80 to 110 newtons per millimeter of width, with a friction coefficient measured between 0.28 and 0.32. The operating temperature range is from -25 to +90 degrees Celsius, while heat-resistant models can operate effectively up to 110 degrees.

A key feature of the Bando DXL timing belt is its high precision in power transmission within synchronization systems at medium to high speeds. This belt provides stable operation up to 10,000 revolutions per minute, with available widths ranging from 6 to 40 millimeters. The length options vary from 150 to 1800 millimeters, and the semi-circular tooth design reduces vibration and noise levels to less than 68 decibels. These characteristics make the Bando DXL timing belt an ideal choice for precision industrial equipment and high-accuracy production lines.

Bando DH Timing Belt

The Bando DH timing belt is made of neoprene rubber reinforced with glass fiber and polyester cords, providing high tensile strength and excellent dimensional stability. The belt teeth are designed with a pitch ranging from 8 to 14 millimeters to ensure precise and uniform power transmission. Its tensile strength is measured between 90 and 120 newtons per millimeter of belt width, with a surface friction coefficient of approximately 0.3. The operating temperature range is from -20 to +100 degrees Celsius, and heat-resistant models can operate effectively up to 120 degrees.

A key feature of the Bando DH timing belt is its high positional accuracy and stable performance at high speeds. It can handle rotational speeds up to 10,000 revolutions per minute, with widths ranging from 10 to 50 millimeters. Standard belt lengths are produced between 200 and 2000 millimeters, and the tooth design reduces vibration and noise to less than 70 decibels. These characteristics make the Bando DH timing belt ideal for high-efficiency industrial machinery requiring precise power transmission.

Bando BX105 V-Belt

The Bando BX105 V-belt has a cross-sectional width of 17 mm and an effective length of 105 inches, designed for power transmission in medium to heavy industrial systems. It is manufactured from rubber reinforced with polyester cords, providing tensile strength up to 1200 N/cm. The narrow V-shaped profile increases pulley contact and reduces slippage, ensuring power transmission efficiency up to 97%. The belt’s operating temperature range is from -30°C to +90°C, enabling stable performance in variable environmental conditions.

The reinforcing cords of the BX105 Bando belt provide high resistance to bending fatigue and excellent flexibility, extending service life up to 10,000 operating hours under medium load. The outer layer is resistant to wear, oil, dust, and temperature variations, with the capability to withstand sudden accelerations and shock loads. This belt complies with international standards ISO 4184 and DIN 2215, making it highly suitable for precise and reliable power transmission applications.

Bando 450DH100G Industrial Timing Belt

The Bando 450DH100G industrial timing belt is a precision toothed belt designed for shaft synchronization and slip-free power transmission. The belt length is 450 millimeters, width is 100 millimeters, and the tooth pitch in the DH series is 8 millimeters. The semicircular tooth profile ensures uniform engagement and reduces mechanical noise. The use of fiberglass tensile cords and durable elastomer in the body provides dimensional stability and high endurance under cyclic loading conditions.

The Bando 450DH100G industrial timing belt can operate in temperatures ranging from minus 20 to plus 100 degrees Celsius, delivering excellent performance in heavy-duty applications. Its abrasion resistance and stability against oil and dust make it suitable for machinery with continuous duty cycles. The optimized friction surface of the teeth reduces energy consumption and extends bearing life. These features make the Bando belt widely used in packaging machines, material handling systems, and precision equipment.

Bando DL Timing Belt

The Bando DL timing belt is made of neoprene rubber reinforced with glass fiber and nylon, providing high tensile strength. The belt teeth feature a semi-circular design with a standard pitch ranging from 3 to 14 millimeters, ensuring smooth power transmission. Its tensile strength is measured between 70 and 100 newtons per millimeter of width, with an average surface friction coefficient of 0.3. The operating temperature range of the Bando DL timing belt is from -30 to +100 degrees Celsius, while heat-resistant models can perform effectively up to 120 degrees.

One of the outstanding features of the Bando DL timing belt is its high positioning accuracy in synchronization systems. This belt operates stably at high speeds up to 12,000 revolutions per minute. The available widths range from 6 to 50 millimeters, and the lengths vary from 200 to 2000 millimeters. The tooth profile is designed to generate vibration noise below 70 decibels, making it highly suitable for high-speed production lines.

Bando 3V475 V-Belt

The Bando 3V475 V-belt features a cross-sectional width of 9.5 mm and an effective length of 47.5 inches, designed for mechanical power transmission in light and medium industrial applications. The belt is made of reinforced rubber with tensile fibers, providing a tensile strength of up to 700 N/cm. Its V-shaped profile increases positive friction between the belt and pulley, ensuring up to 97% power transmission efficiency. The belt offers thermal resistance from -30°C to +90°C, guaranteeing stable performance in variable environmental conditions.

The reinforcing fibers of the 3V475 Bando belt provide high flexibility and resistance to bending fatigue, extending service life up to 8,500 operating hours under medium load. The outer layer is resistant to wear, oil, and dust particles, and can withstand impact loads and sudden accelerations. This belt fully complies with ANSI RMA and ISO 4184 industrial standards, making it suitable for precise and reliable power transmission systems.

Bando 5VX810 V-Belt

The Bando 5VX810 V-belt has a cross-sectional width of 16 mm and an effective length of 81 inches, designed for high-power transmission in heavy-duty industrial machinery. It is made of compressed rubber reinforced with tensile fibers, providing tensile strength up to 1500 N/cm. The narrow V-shaped design increases pulley contact surface, ensuring power transmission efficiency up to 98%. The belt’s operating temperature range is from -30°C to +100°C, allowing stable performance under variable environmental conditions.

The reinforcing fibers of the 5VX810 Bando belt provide excellent resistance to bending fatigue, extending service life up to 12,000 operating hours under medium load. The outer layer is resistant to wear, oil, heat, and dust, and can withstand impact loads and sudden accelerations. This belt complies with ANSI RMA and ISO 4184 standards, making it highly suitable for industrial power transmission systems that require accuracy and long-term reliability.

PiroozPack Plaster Bandage Packaging Machine

The PiroozPack Plaster Bandage Packaging Machine provides a professional and efficient solution for hygienic packaging of plaster bandages. With a modern design and user-friendly operation, this machine ensures a fully standardized packaging process, protecting bandages from contamination, dust, and moisture.

Offering both automatic and semi-automatic packaging options, it meets the needs of hospitals, clinics, and plaster bandage manufacturing centers. High-speed performance, precise operation, and adjustable settings reduce errors and waste, making storage, handling, and transportation of bandages safe and convenient.

Customers looking to purchase the PiroozPack Plaster Bandage Packaging Machine can take advantage of our comprehensive sales and support services. The pricing is competitive and reflects the high quality and functionality of the machine. Choosing this equipment ensures hygiene compliance while enhancing productivity and saving time and costs.

BANDO timing belt meter

The BANDO timing belt by the meter is manufactured using high-quality raw materials and advanced technologies to deliver stable and precise power transmission. These belts are mainly made from durable polyurethane or rubber and feature a reinforced core with steel or aramid fibers, enhancing tensile strength and extending belt life. The standardized tooth design ensures effective, slip-free engagement with pulleys and prevents premature wear. Offered by the meter, these belts can be cut to custom lengths to meet diverse industrial requirements.

In addition to high mechanical resistance, the BANDO timing belt by the meter is resistant to heat, industrial oils, and harsh environmental conditions, making it ideal for use in production lines, automation machinery, and conveyor systems. Its high flexibility for installation and use in both closed-loop and open systems is another prominent feature, improving operational efficiency and reducing maintenance costs.

BANDO V-belt

The BANDO V-belt is specially designed and manufactured using high-quality materials to deliver efficient power transmission in mechanical systems. Made from rubber resistant to wear, heat, and oil, this belt ensures durability and a long service life even under demanding working conditions. Its V-shaped profile provides effective and uniform contact with pulleys, reducing slippage and maximizing power transfer efficiency. Additionally, reinforced fibers inside the belt guarantee high tensile strength and resistance to stretching and tearing.

With suitable flexibility, the BANDO V-belt can operate reliably across various temperatures and environments, making it ideal for industrial and automotive applications. It is used in systems requiring stable, quiet, and slip-free power transmission. Precise design and strict quality control in BANDO belt production have established this product as a dependable option with long-lasting performance in the market.

BANDO industrial belts

The BANDO industrial belt is manufactured from special rubber compounds with thermal resistance up to 85°C and high mechanical strength. These belts are available in flat and toothed types, with thicknesses ranging from 4 to 12 millimeters and widths between 15 to 55 millimeters. The toothed design increases power transmission efficiency up to 95% and supports dynamic loads up to 1800 Newtons. Additionally, their high abrasion resistance makes them ideal for use in harsh industrial environments.

The internal reinforcement system of BANDO belts consists of polyester fibers and fiberglass, providing optimal flexibility and tensile strength between 1700 and 3200 Newtons per centimeter of width. These belts offer excellent resistance to oils and chemicals, ensuring a service life exceeding 8 years. Compliance with ISO 9001 and JIS standards in manufacturing guarantees superior quality and stable performance in industrial applications.

Bando power transmission V-belt

The Bando power transmission V-belt is manufactured using high-quality raw materials and advanced technology, ensuring durability and optimal performance in power transmission systems. With its robust and flexible structure, this belt can withstand high pressures and continuous operation under various environmental conditions. Its specially designed V-shaped profile increases grip and reduces slippage in a wide range of industrial and automotive machinery.

Additionally, the Bando belt offers high resistance to wear, heat, and oil, providing stable and long-lasting performance while minimizing the need for frequent maintenance. Available in various sizes and dimensions, it allows precise adaptation to different power transmission requirements, making it an ideal choice for diverse industrial applications.