| Exporter, Wholesale, Manufacturer | |
| Isfahan |  |
| +989122003350 | |
- Price :negotiated
press clamping fitting , Iran
- Price :To negotiate
- order by whatsapp
A compression tee fitting is a mechanical branch connector used to divide flow in cold and hot water piping systems. The body is typically manufactured from forged CW617N brass with tensile strength between 350 and 500 megapascals. Nominal working pressure ranges from 10 to 16 bar, with test pressure up to 24 bar. Connection sizes are generally designed for 16 to 32 millimeter pipes. Operating temperature ranges from 0 to 95 degrees Celsius with peak tolerance up to 110 degrees Celsius. Sealing is achieved using a brass compression ring and high temperature resistant EPDM O ring.
The structure consists of a central body, threaded compression nuts, and a cutting ring for mechanical pipe locking. Body wall thickness typically ranges from 3 to 6 millimeters to withstand internal pressure stress. Thread machining tolerance is below ±0.05 millimeter, and internal surface roughness is designed under 3.2 microns. Pressure drop in the branch path remains below 0.15 bar at nominal flow rate. Nickel surface plating with thickness from 8 to 20 microns enhances corrosion resistance. Quality control includes hydrostatic testing, leakage testing, and precise dimensional inspection.You can order and buy press clamping fitting from Iran by contacting us through whatsaap and email.
WEBSITE: press clamping fitting Iran
Guide to Choosing a Suitable Coupling Tee for PEX-AL-PEX Pipe in iran
To choose a suitable coupling tee for a PEX-AL-PEX five layer pipe, first determine the nominal diameter DN of the pipe so the tee matches size common sizes range from DN16 to DN32. The body material should be glass-reinforced polypropylene or chrome plated brass with corrosion resistance and a pressure rating of at least 10 bar. Opt for compression type coupling fittings to ensure secure leak-free joints. Selecting a tee with an integrated stop valve or check valve depends on safety and application requirements. Consider working pressure and fluid temperature for hot water up to 90°C and 6–10 bar pressure ratings are typical. Finally, verify compliance with relevant national or international standards e.g., EN ISO 15874 and choose products with reliable warranty for assured performance.
