| Exporter, Wholesale, Manufacturer | |
| Isfahan |  |
| +989122003350 | |
- Price :negotiated
press clamping fitting , Iran
- Price :To negotiate
- order by whatsapp
A compression elbow fitting is a 90 degree angled connector used to change flow direction in cold and hot water piping systems. The body is typically manufactured from forged CW617N brass with tensile strength between 350 and 500 megapascals. Nominal working pressure ranges from 10 to 16 bar, with test pressure up to 24 bar. Connection sizes are generally designed for 16 to 32 millimeter pipes. Operating temperature ranges from 0 to 95 degrees Celsius with peak tolerance up to 110 degrees Celsius. Sealing is achieved using a brass compression ring and high temperature resistant EPDM O ring.
The structure includes an angled body, threaded compression nuts, and a cutting ring for mechanical pipe locking. Body wall thickness typically ranges from 3 to 6 millimeters to withstand internal pressure stress. Thread machining tolerance is below ±0.05 millimeter, and internal surface roughness is designed under 3.2 microns. Pressure drop at the 90 degree turn remains below 0.15 bar at nominal flow rate. Nickel surface plating with thickness from 8 to 20 microns enhances corrosion resistance. Quality control includes hydrostatic testing, leakage testing, and precise dimensional inspection.You can order and buy press clamping fitting from Iran by contacting us through whatsaap and email.
WEBSITE: press clamping fitting Iran
Original Coupling Elbow Buying Guide in iran
In the original coupling elbow buying guide, technical specifications must comply with ASME B16.11 and ASTM A105 standards. The body material should be forged with controlled chemical composition and carbon content below 0.35 percent. Nominal pressure ratings are typically defined in Class 2000, 3000, and 6000 and must match system design requirements. Wall thickness must correspond to pipe schedule such as SCH 40 or SCH 80. Threads must follow NPT or BSP standards without burrs or misalignment. The internal surface should be uniform and free from casting porosity or surface cracks. Engraved markings including manufacturer name, pressure class, and heat number indicate authenticity. Component weight should not deviate more than 5 percent from reference dimensional tables. Purchasing from suppliers providing material test certificates and visual inspection is strongly recommended.
