| Exporter, Wholesale, Manufacturer | |
| Isfahan |  |
| +989122003350 | |
- Price :negotiated
press clamping fitting , Iran
- Price :To negotiate
- order by whatsapp
A wall plate male threaded press elbow is a 90 degree combined fitting designed for directional change and fixed water outlet installation in piping systems. The body is manufactured from low lead forged brass with tensile strength between 350 and 500 megapascals. Nominal working pressure ranges from 10 to 16 bar, with test pressure up to 24 bar. Press connections are typically designed for 16 to 32 millimeter pipes, while the male threaded outlet ranges from 1 2 to 1 inch. Operating temperature varies from 0 to 95 degrees Celsius with peak tolerance up to 110 degrees Celsius. The wall plate enables precise fixation using standard anchor screws.
The component structure includes a 90 degree angled body, a press socket with stainless steel sleeve, and a precision machined male thread with tolerance below ±0.05 millimeter. Body wall thickness ranges from 3 to 6 millimeters to withstand internal pressure stress. Sealing of the press joint is achieved through EPDM O rings and controlled pipe deformation. Pressure drop at the 90 degree turn remains below 0.2 bar at nominal flow rate. Nickel plating thickness from 8 to 20 microns enhances corrosion resistance. Quality control includes hydrostatic testing, pull out resistance testing, and precise inspection of threads and mounting plate geometry.You can order and buy press clamping fitting from Iran by contacting us through whatsaap and email.
WEBSITE: press clamping fitting Iran
Common Mistakes When Installing a Press-Fit Male Threaded Wall Plate Elbow in iran
When installing a press-fit male threaded wall plate elbow, the most common error is selecting a size incompatible with the nominal pipe diameter, which leads to localized leakage. Failure to calibrate and deburr the pipe after cutting can damage the O ring and reduce joint lifespan. The pipe insertion depth must match the manufacturer marking with tolerance less than 1 millimeter. Using a press tool with an incorrect jaw profile such as U or TH causes uneven compressive stress distribution. Not anchoring the plate securely to the wall with appropriate screws and plugs transfers bending stress to the male threads. Applying excessive torque to the external threads may create micro cracks in the brass body. A hydrostatic pressure test at least 1.5 times the working pressure is essential to verify sealing integrity. Maintaining correct center to center outlet spacing according to plumbing drawings prevents alignment errors.
