| Exporter, Wholesale, Manufacturer | |
| Isfahan |  |
| +989122003350 | |
- Price :negotiated
press clamping fitting , Iran
- Price :To negotiate
- order by whatsapp
A male threaded press adapter is a transition fitting used to connect press pipes to female threaded components in cold and hot water systems. The body is manufactured from low lead forged brass with tensile strength between 350 and 500 megapascals. Nominal working pressure ranges from 10 to 16 bar, with test pressure up to 24 bar. Press connection sizes are typically designed for 16 to 32 millimeter pipes, while the male threaded outlet ranges from 1 2 to 2 inches. Operating temperature varies from 0 to 95 degrees Celsius with peak tolerance up to 110 degrees Celsius. External threads comply with BSPT or NPT standards.
The component structure includes a press socket with stainless steel sleeve, EPDM O ring, and a precision machined threaded section with tolerance below ±0.05 millimeter. Body wall thickness ranges from 3 to 6 millimeters to withstand internal pressure stress. Sealing of the press joint is achieved through controlled pipe deformation and O ring compression. Pressure drop in the straight path remains below 0.15 bar at nominal flow rate. Nickel plating thickness from 8 to 20 microns enhances corrosion resistance. Quality control includes hydrostatic testing, pull out resistance testing, and precise thread inspection.You can order and buy press clamping fitting from Iran by contacting us through whatsaap and email.
WEBSITE: press clamping fitting Iran
Production Standards for Press-Fit Male Threaded Couplings
Production standards for press-fit male threaded couplings must be defined based on the dimensional and pressure requirements of EN 1254-3 or ISO 21003. The body material is typically CW617N brass alloy or its equivalent with controlled lead and zinc content. Chemical composition must comply with EN 12165 limits and be verified through spectrometric analysis testing. External threads must be machined in accordance with ISO 7-1 or ASME B1.20.1 with controlled pitch tolerance class. The sealing system, including EPDM or HNBR O ring, must be certified for temperature resistance up to 95 degrees Celsius. The pressing process must use standardized jaw profiles such as TH or U with calibrated pressing force. Each component must undergo hydrostatic pressure testing at least 1.5 times the nominal pressure rating. Marking including nominal size, batch code, and manufacturer name is mandatory for traceability. Final quality control must include dimensional inspection with tolerance below 0.1 millimeter.
