| Exporter, Wholesale, Manufacturer | |
| Isfahan |  |
| +989122003350 | |
- Price :negotiated
press clamping fitting , Iran
- Price :To negotiate
- order by whatsapp
A 90 degree male threaded wall plate press tee is a combined fitting designed for branching and fixed installation in cold and hot water systems. The body is manufactured from low lead forged brass with tensile strength between 350 and 500 megapascals. Nominal working pressure ranges from 10 to 16 bar, with test pressure up to 24 bar. Press connections are typically designed for 16 to 32 millimeter pipes, while the male threaded branch ranges from 1 2 to 1 inch. Operating temperature varies from 0 to 95 degrees Celsius. The mounting plate ensures accurate fixation on walls or metal structures.
The component structure includes a 90 degree angled body, press sockets with stainless steel sleeves, and a precision machined male thread with tolerance below ±0.05 millimeter. Body wall thickness ranges from 3 to 6 millimeters to withstand internal pressure stress. Sealing of the press joint is achieved through EPDM O rings and controlled pipe deformation. Pressure drop in the main path remains below 0.2 bar at nominal flow rate. Nickel plating thickness from 8 to 20 microns improves corrosion resistance. Quality control includes hydrostatic testing, pull out resistance testing, and precise inspection of threads and angle geometry.You can order and buy press clamping fitting from Iran by contacting us through whatsaap and email.
WEBSITE: press clamping fitting Iran
Body Material and Manufacturing Standards of 90 Degree Press Wall Plate Female Tee in iran
The body of a 90 degree press wall plate female tee is typically manufactured from forged CW617N brass containing at least 58 percent copper, with tensile strength between 330 and 500 MPa. In demanding environments, AISI 304 or 316 stainless steel is used for enhanced corrosion resistance. The press sleeve is usually stainless steel, while sealing O rings are made of EPDM resistant up to 110°C. Production involves hot forging at approximately 700 to 750°C followed by precision machining of threads according to ISO 228. Dimensional and performance requirements comply with EN 1254, while multilayer pipe compatibility follows EN ISO 21003. The typical working pressure ranges from 10 to 16 bar, and each unit undergoes 100 percent leakage testing. Nickel or chrome plating improves surface durability and resistance to dezincification.
