Price: To be negotiated

Elevator

Exporter, Wholesale, Manufacturer
Tehran-South
+989122003350

Price: Negotiate

Price :negotiated

Elevator , Iran

Modern elevators are designed with standard capacities of 450 to 1600 kg for 6 to 20 persons. Their travel speed ranges from 1 to 10 meters per second. The car is typically constructed from galvanized steel panels, 1.2 to 2 mm thick. The drive system is usually a Permanent Magnet Synchronous Motor PMSM with 95% efficiency. These motors reduce energy consumption by up to 50% compared to legacy designs. Controllers are based on VVVF inverter technology. This system enables smooth acceleration and deceleration with millimeter-level stopping precision. Steel ropes with 1240 MPa tensile strength and a safety factor of 12 are employed.

The elevator structure utilizes T-type steel guide rails with a hardness of 150 Brinell. The safety system includes an electromechanically triggered parachute-type safety gear. This gear activates at speeds exceeding 15% above the rated limit. All doors feature infrared sensors with a response time under 100 milliseconds. The shaft structure is made of reinforced concrete or steel frame, designed for dynamic loads up to 50 kN. ISO 8100 standard requires vertical acceleration not to exceed 1.5 m/s². Advanced navigation systems use absolute encoder sensors for error-free car position determination.You can order and buy Elevator from Iran by contacting us through whatsaap and email.
WEBSITE: Elevator Iran

Key Considerations When Purchasing a Commercial Elevator

Purchasing a commercial elevator requires evaluating capacity, speed, traffic, and building architecture. Calculate the maximum load requirement based on passenger count and usage type office, shopping mall, hotel. The travel speed 0.5 to 4 meters per second must align with building height and traffic volume. An intelligent traffic control system is essential for optimizing movement and reducing wait times in tall buildings. Review safety features such as dual braking systems, overload sensors, and emergency communication systems. Energy consumption and efficiency rating ISO 25745 impact long-term operational costs. International standard certifications EN 81-20/50, CE and approval from the national regulatory body are mandatory. After-sales service, warranty, and periodic maintenance contracts are key factors in selecting a supplier. Interior design and customization options should harmonize with building decor. Performance testing and pre-delivery inspection by an independent expert are recommended.

Other products