Price: To be negotiated

Elevator cabin

Exporter, Wholesale, Manufacturer
Tehran-South
+989122003350

Price: Negotiate

Price :negotiated

Elevator cabin , Iran

The elevator car consists of an S350GD galvanized steel frame with 350 MPa yield strength. Interior panels are made from 1.5 mm thick 304 stainless steel or 3 mm thick HPL laminate. The standard floor uses anodized extruded aluminum with a diamond pattern and a 0.6 friction coefficient. The ceiling features LED lighting providing 300 lux illumination at 4000 Kelvin color temperature. The ventilation system has an airflow of 50 CFM and operates below 45 decibels. Full-length mirrors use 6 mm thick tempered glass with an anti-scratch coating. The control panel is stainless steel with flat buttons featuring Braille capability.

Standard interior car dimensions for 13 persons are 1600x1400 mm with a 2200 mm height. The door frame is constructed from 6063-T5 aluminum alloy with 95 Brinell hardness. Guide rails on all four corners are installed with a ±0.5 mm alignment tolerance. The direct suspension system uses 4 to 8 steel cables with a 10 mm diameter. The interior finish has an A2 fire classification according to EN 13501-1 standard. Floor load sensors are installed with ±1% accuracy and 150% rated load capacity. All connections utilize Grade 8.8 bolts and nuts with precise torque settings.You can order and buy Elevator cabin from Iran by contacting us through whatsaap and email.
WEBSITE: Elevator cabin Iran

Standard Speed and Capacity of Elevator Cabins in Residential Buildings

The standard speed for residential elevators typically ranges from 0.5 to 1.6 meters per second. For buildings up to 8 floors, a speed of 0.5 to 1 m/s is sufficient. For buildings 8 to 15 floors, a speed of 1 to 1.6 m/s is appropriate. The standard cabin capacity is determined based on unit size and number of occupants. Common capacities for residential apartments are 4 to 10 persons equivalent to 300 to 800 kilograms. A 4-person cabin 300 kg is suitable for low-density buildings with small units. 6 to 8-person cabins 450 to 630 kg are recommended for medium-density buildings with average occupancy. 10-person cabins 800 kg are designed for high-density, high-rise buildings. Precise calculation based on occupancy factor and maximum simultaneous traffic is performed by the design engineer. Compliance with the EN 81-20 standard for safety and performance is mandatory.

Other products