Price: To be negotiated

Hydraulic lift

Exporter, Wholesale, Manufacturer
Tehran-South
+989122003350

Price: Negotiate

Price :negotiated

Hydraulic lift , Iran

Hydraulic column lifting systems are manufactured from S355JR structural steel with 355 MPa yield strength. Standard lifting capacity ranges from 2 to 50 tonnes distributed across four contact points. Maximum lift height varies from 1.5 to 4 meters at a constant speed of 40-60 mm/s. The system is powered by an axial piston pump and a 15 kW electric motor. Operating pressure is adjustable up to 250 bar using proportional control valves. Piezoelectric pressure sensors in each cylinder maintain load leveling within 2 mm accuracy. Safety systems include hydraulic locking valves, overload relief valves, and emergency stop mechanisms.

The system features four synchronized double-acting cylinders on independent columns. Control is via PLC with an HMI interface, capable of storing 100 height profiles. An auto-balancing system keeps platform tilt below 0.5 degrees. The platform employs sliding gears and hardened guide rails with under 0.1 mm backlash. The hydraulic power unit integrates a 200-liter reservoir with air-cooled heat exchange. Electrical enclosures are rated IP65 for dust and water resistance. The system includes electronic load sensing and overload protection with 98% accuracy.You can order and buy Hydraulic lift from Iran by contacting us through whatsaap and email.
WEBSITE: Hydraulic lift Iran

Types of Hydraulic Lifting Devices

Hydraulic lifting devices are designed in several main types for industrial and service applications. Single Post Hydraulic Lifts are used for lifting light passenger vehicles with a capacity of about 3 to 4 tons. Two-Post Hydraulic Lifts with fixed or movable columns are common for full under-vehicle access and capacities up to 6 tons. Four-Post Hydraulic Lifts with large platforms are used for heavy-duty repairs, inspections, and truck maintenance with capacities up to 20 tons. Scissor Lifts with a folding scissor mechanism are used for working at height in warehouses, workshops, and industries. Motorcycle-Specific Hydraulic Lifts are also designed for motorcycle maintenance. Choosing the appropriate type depends on load type, workspace, required height, and budget. Compliance with ANSI/ALI and CE safety standards is mandatory.

Other products