| Baygan-Sanat |
| Iran |
| 09196218230 |
The YILMAZ WORM gearbox series ET is an advanced generation of the E series, engineered for higher efficiency and optimized performance. Its housing is made from reinforced die-cast aluminum alloy and is available in sizes 25 to 150. The gear ratio range is selectable between 5 and 100, with mechanical efficiency reaching up to 92 percent in single-stage models. The precision heat-treated steel output shaft ensures torque transmission with minimal vibration and very low noise. Natural cooling through the radial finned housing enables effective heat dissipation and extends the service life of bearings and gears.
The YILMAZ ET series gearbox can deliver up to 1500 Nm of output torque, supporting input power from 0.12 to 11 kW. The motor interface uses a standard IEC flange with options for direct or coupled input connection. Heat- and wear-resistant seals prevent oil leakage under heavy-duty operating conditions. Permanent lubrication with synthetic ISO VG 320 oil reduces friction and enhances motion efficiency. Precise assembly tolerances minimize backlash and ensure stable operation under dynamic loads. Manufactured in compliance with CE and ISO 9001 standards, this gearbox is ideal for hoists, conveyors, and industrial packaging systems.
 | |
| Baygan-Sanat | 09196218230 |
| Baygan-Sanat |
| Iran |
| 09196218230 |
The YILMAZ WORM gearbox series E is a compact and efficient power transmission system designed for light to medium industrial applications. It features a die-cast aluminum housing available in sizes 25 to 110, with gear ratios ranging from 7.5 to 100. The mechanical efficiency varies between 75 and 90 percent, and it supports both horizontal and vertical mounting positions. The hardened steel output shaft and high-precision bronze worm wheel ensure smooth and quiet operation. Cooling is achieved through a finned housing that improves heat dissipation and extends component life under high-temperature conditions.
The YILMAZ series E gearbox delivers up to 1000 Nm of output torque and supports input power from 0.09 to 7.5 kW. The motor interface uses a standard IEC flange, with options for direct or hollow input shafts. A heat-resistant O-ring sealing system prevents oil leakage. Permanent lubrication with grease or mineral oil minimizes maintenance requirements. Precision machining and tight assembly tolerances reduce backlash and improve motion accuracy. Manufactured in compliance with CE and ISO 9001 standards, this gearbox is a reliable solution for conveyors, pumps, mixers, and material handling systems.
 | |
| Baygan-Sanat | 09196218230 |
| Baygan-Sanat |
| Iran |
| 09196218230 |
The YILMAZ WORM gearbox series EV is an advanced model featuring a hybrid design and high reliability for continuous industrial applications. It is built with a gray cast iron housing resistant to impact and mechanical stress, available in sizes 40 to 150. The gear ratio ranges from 7.5 to 100, achieving mechanical efficiency up to 90 percent. The output shaft is made of hardened alloy steel, ensuring smooth and quiet torque transmission. Its finned housing and increased oil volume provide stable thermal performance and extended durability under high operating temperatures.
The YILMAZ EV series gearbox delivers up to 1800 Nm of output torque, supporting input power from 0.18 to 15 kW. The IEC-standard motor flange allows direct coupling with three-phase motors. NBR heat-resistant seals prevent oil leakage under heavy load conditions. Permanent lubrication with ISO VG 320 industrial oil improves efficiency and reduces gear wear. High-precision machining and accurate shaft alignment minimize backlash and vibration. Compliant with CE and ISO 9001 standards, this gearbox is widely used in material handling systems, industrial hoists, and mixers.
 | |
| Baygan-Sanat | 09196218230 |
