Toyota Iran

Toyota forklift hydraulic pump repair

Repairing the hydraulic pump of a Toyota forklift involves accurately diagnosing faults, disassembling the pump, and inspecting internal components such as the rotor, gears, and O-rings. Before repair, the hydraulic system should be drained and filters replaced to prevent contamination. Using pressure and flow measurement tools for numerical diagnostics ensures precise fault identification and reduces the risk of recurring pump failures.

Toyota hydraulic pumps are typically gear-type or piston-type with operating pressures between 150 and 180 bar and flow rates of 45 to 75 liters per minute. The original TOYOTA brand, whether domestic or OEM, provides high-quality materials and assembly. Key numerical specifications include pressure tolerance, volumetric efficiency, and maximum designed flow, which are critical for operating lift cylinders and hydraulic steering systems.

During the repair process, special attention must be paid to worn gears, bushings, and internal components. Using standard hydraulic oil, replacing worn parts, and testing pressure and flow after reassembly restores the pump’s performance to factory specifications. This process ensures the Toyota forklift hydraulic system operates safely and efficiently at full capacity.

Toyota Corola starter solenoid

The Toyota Corolla starter solenoid is a compact dual-coil electromagnetic switch. It is optimized for the vehicles standard 12V DC electrical architecture. The main pull-in coil peak current reaches up to 50 Amperes. The subsequent hold-in coil steady-state current is approximately 3.5 Amps. The generated axial magnetic pull force is a minimum of 52 Newtons. This force actuates the plunger through a 13-millimeter linear stroke. Total mechanical engagement time from signal to contact is under 110 milliseconds. This solenoid is designed for direct mounting onto the starter motor assembly.

The module design features two main terminals: Battery B and Start S. Some variants include a third monitoring terminal M. The pull-in coils electrical resistance at 20°C is 0.15 Ohms. The hold-in coil resistance at the same temperature is 2.2 Ohms. Its housing is constructed from zinc alloy with an abrasion-resistant electrostatic coating. Its approved operational temperature range is from -30 to +115 degrees Celsius. Its cyclic life exceeds 130,000 operations per Toyota automotive standards. This part is compatible with Toyota Corolla NZ and ZZ series engines.

Stock clutch disc and pressure plate for Toyota Hilux, Valeo brand

The stock clutch disc and pressure plate for the Toyota Hilux by Valeo are designed with a 240-millimeter disc diameter and 8-millimeter thickness to ensure precise torque transfer to the gearbox. The disc body is made from alloy steel with a tensile strength of 950 megapascals, providing stable performance at operating temperatures up to 300 degrees Celsius. The disc surface features an anti-wear coating and a Rockwell C hardness of 45, ensuring sufficient resistance against corrosion and deformation. The clutch plate includes eight diaphragm springs and a friction coefficient of 0.38, allowing uniform, slip-free power transmission.

This Valeo clutch kit for the Toyota Hilux can handle up to 280 newton meters of torque and is optimized for 2.5-liter diesel and gasoline engines. The net weight of the assembly is 7.2 kilograms, ensuring dynamic balance and reduced vibration. The multilayer friction plate reinforced with fibers provides a service life exceeding 100,000 kilometers. The internal damper system with an 18-degree torsion angle prevents sudden shocks from reaching the gearbox and improves power transmission efficiency.

Rear Wheel Bearing for Capra and Toyota Pickup 1600

Sale and Purchase Price of Rear Wheel Bearing for Capra and Toyota Pickup 1600 – JBR Chinese Brand at Ansari Bearing Store

The JBR rear wheel bearing, specifically designed for Capra and Toyota Pickup 1600 vehicles, is a critical component in the suspension and power transmission system. It plays a key role in ensuring smooth, safe, and vibration-free vehicle performance. With its precise engineering and durable materials, this product is a professional-grade choice for mechanics and auto parts retailers.

To source the right rear wheel bearing for Capra and Toyota Pickup 1600, the JBR brand—with its proven durability and high manufacturing quality—stands out as a reliable option for professional technicians and spare parts distributors.