
Toyota Corola starter solenoid , Iran
- Price :To negotiate
- order by whatsapp
The Toyota Corolla starter solenoid is a compact dual-coil electromagnetic switch. It is optimized for the vehicles standard 12V DC electrical architecture. The main pull-in coil peak current reaches up to 50 Amperes. The subsequent hold-in coil steady-state current is approximately 3.5 Amps. The generated axial magnetic pull force is a minimum of 52 Newtons. This force actuates the plunger through a 13-millimeter linear stroke. Total mechanical engagement time from signal to contact is under 110 milliseconds. This solenoid is designed for direct mounting onto the starter motor assembly.
The module design features two main terminals: Battery B and Start S. Some variants include a third monitoring terminal M. The pull-in coils electrical resistance at 20°C is 0.15 Ohms. The hold-in coil resistance at the same temperature is 2.2 Ohms. Its housing is constructed from zinc alloy with an abrasion-resistant electrostatic coating. Its approved operational temperature range is from -30 to +115 degrees Celsius. Its cyclic life exceeds 130,000 operations per Toyota automotive standards. This part is compatible with Toyota Corolla NZ and ZZ series engines.You can order and buy Toyota Corola starter solenoid from Iran by contacting us through whatsaap and email.
WEBSITE: Toyota Corola starter solenoid Iran
Symptoms of Toyota Corolla Automatic Start Malfunction
The automatic start system may malfunction with specific symptoms. The engine not starting when pressing the button is the first sign. Green or amber warning lights on the dashboard may flash. Sometimes the engine starts and then stalls again. The vehicles main battery may discharge rapidly. The system may not respond to the transponder key. In some cases, the door or brake sensors are faulty. Noise or delay in operation are other potential symptoms. Precise diagnosis requires checking both hardware and software.









