Ring Iran

Loader steering valve repair

The steering control valve in Volvo, Komatsu, and Hyundai loaders is a critical component of the hydraulic steering system, responsible for controlling oil flow and pressure to the steering cylinders. These valves are typically high-pressure, double-acting designs capable of withstanding operating pressures between 200 and 260 bar. Internally, they feature pistons, springs, and precisely machined housings with tolerances below 0.05 millimeters, enabling accurate oil flow control and precise steering shaft movement. Selecting the correct valve and maintaining the specified flow rate for each loader model is crucial to prevent vibration and premature wear of hydraulic components.

The mounting location of the steering valve is usually on the outlet path of the hydraulic pump, near the input shaft of the orbital steering unit. This position allows the valve to receive direct hydraulic pressure and transmit force accurately to the steering cylinders. The valve is connected to pressure and return lines using flange couplings and high-pressure-resistant O-rings. Improper alignment or installation can lead to leakage, reduced flow, and increased shaft vibration, shortening the lifespan of the hydraulic components.

The repair process for the steering valve involves disassembling the

forklift orbitrol steering unit repair

The Orbitrol steering unit in tractors and forklifts is responsible for converting hydraulic oil pressure and flow into mechanical movement of the steering shaft. This unit is typically high-pressure, double-acting, and capable of handling operating pressures between 180 and 260 bar. Its internal design includes pistons, springs, valves, and precisely machined housings with tolerances below 0.05 millimeters, allowing accurate oil flow control and precise steering shaft movement. Selecting the appropriate unit and maintaining the specified flow and pressure for each tractor or forklift model is crucial to prevent vibration and premature component wear.

The mounting location of the Orbitrol steering valve is usually on the hydraulic pump outlet path, near the input shaft of the steering unit. This position allows the valve to receive direct hydraulic pressure and transmit force accurately to the steering cylinders. Pressure and return lines are connected with high-pressure O-rings and flange couplings to prevent leakage and flow reduction. Improper alignment or installation can cause increased steering shaft vibration and reduced lifespan of hydraulic components.

The repair process for the Orbitrol steering unit involves disassembling the assembly, thoroughly cleaning all com

Peugeot 405 fixed timing bearing

The fixed timing bearing for the Peugeot 405 is a vital component within the engine’s timing system, responsible for maintaining the precise positioning of the timing belt along its path. Unlike tensioner or idler bearings, this bearing does not apply adjustable pressure to the belt and functions in a stationary manner. It is typically constructed from hardened steel with high resistance to friction and elevated temperatures, ensuring reliable and consistent performance over time. The precision-engineered design of this component helps reduce noise and vibration during engine operation and prevents any disruption in the synchronization between the crankshaft and camshaft—an essential factor for optimal combustion efficiency and mechanical safety.

From a technical standpoint, the fixed timing bearing used in the Peugeot 405 is usually manufactured to standard dimensions and is fully compatible with TU5 and XU7 engine timing systems. This bearing must withstand high temperatures, provide effective lubrication, and feature proper sealing to avoid damage or performance loss under harsh operating conditions. Its service life is heavily influenced by the quality of its materials, manufacturing precision, and correct installation. Therefore, using certified, high-quality bearings

orbital steering unit repair

The Orbital Steering Unit is a precise hydraulic system designed to convert linear hydraulic oil movement into rotational motion of the steering shaft. This unit is commonly used in heavy machinery, tractors, and combines, and can handle operating pressures between 180 and 250 bar. Its internal design includes multi-channel pistons, control valves, and housings with tolerances below 0.05 millimeters, enabling force transmission with minimal friction and leakage.

The mounting location of the orbital steering unit is usually on the input shaft of the steering system, near the hydraulic pump. This position allows the unit to receive direct hydraulic pressure and transmit precise motion to the output steering shaft. Pressure and return lines are connected with high-pressure-resistant O-rings and flange couplings. Any leakage or misalignment at this point can cause increased vibration, reduced steering precision, and premature bearing wear.

The repair process for an orbital steering unit involves disassembling the unit, inspecting piston wear, valves, and housing, and measuring tolerances with a digital micrometer. If cracks or wear greater than 0.05 millimeters are detected, component replacement is mandatory. After reassembly, the unit must be tested on a hydraulic bench at 20

Pride Fixed Timing Bearing

The fixed timing bearing of the Pride is a crucial component of the vehicles timing system, responsible for providing mechanical support to the movement path of the timing belt without applying any variable tension or adjustment. Unlike idler or spring-loaded bearings, this type functions in a fixed manner, serving primarily as a durable support to maintain the belt’s straight trajectory. The body of this bearing is typically made from heat-treated alloy steel, engineered to withstand the high pressure and temperature conditions resulting from continuous engine operation. Using a high-quality, standard-compliant fixed timing bearing in a Pride engine helps reduce premature wear of the timing belt, eliminate unwanted noise in the timing system, and maintain the engine’s precise performance.

From a technical standpoint, the fixed timing bearing must meet exact dimensional specifications according to factory design to properly align with Pride engines such as the M13 and similar models. It generally features a sealed construction that prevents the intrusion of contaminants, dust, and moisture, thereby extending its service life. The internal lubrication system is permanent, requiring no re-servicing. High heat resistance, smooth and silent operation, and the ability to endure

L90 car alternator bearing

The alternator bearing for the L90 vehicle is a crucial and sensitive component within the car’s electrical system. Its primary function is to reduce friction between the rotating parts of the alternator and provide mechanical support to its shaft. This bearing is manufactured from high-strength alloy steel that undergoes heat treatment to enhance its resistance against heat, pressure, and continuous vibrations. Its precise and standardized design ensures smooth and quiet operation of the alternator under various working conditions. Using a high-quality bearing in the L90 alternator plays a vital role in maintaining stable voltage in the vehicle’s electrical system and preventing premature failures.

Structurally, the L90 alternator bearing typically features a fully sealed system that prevents dust, moisture, and contaminants from entering the bearing housing. This design significantly extends the bearing’s service life and reduces the need for frequent maintenance. Its internal lubrication is permanent and engineered to maintain optimal performance at high speeds and engine temperatures. The ball retainer cage is made from wear-resistant materials, and combined with the precise internal components, it provides smooth, vibration-free, and quiet operation. These character

PiRoozPack Scouring Pad Packaging Machine

The PiRoozPack scouring pad packaging machine is a professional solution for hygienic, fast, and reliable packaging of kitchen cleaning products. With its industrial design, full touchscreen control system, and automatic operation, it delivers consistent, durable, and visually appealing packaging.

This machine is ideal for packaging single or double-sided scouring pads, sponge scrubbers, metal scrubbers, dishwashing sponges, and cleaning pads. The process is completely hands-free, ensuring better hygiene and extended shelf life. It supports various types of film including transparent, pearlized, and metallized, creating a clean, store-ready appearance.

The scouring pad packaging machine offers adjustable pack length, film feed speed control, and the option to install a photocell sensor for precise cutting on printed film—perfect for brands focused on packaging design and visual identity.

If you
e looking to buy a scouring pad packaging machine that’s efficient, reliable, and scalable, PiRoozPack is your trusted partner. With extensive experience in the sale of scouring pad packaging machines, we provide expert consultation and full support. Contact us for up-to-date scouring pad packaging machine prices.

All machines include a 2-year unconditional warranty, free

Peugeot 405 alternator bearing

The alternator bearing for the Peugeot 405 is a vital component of the vehicle’s charging and power generation system. Its primary function is to facilitate the smooth rotation of the alternator shaft and reduce friction between moving parts. This bearing is typically made from heat-treated alloy steel, providing strong resistance to high temperatures, dynamic loads, and continuous rotational stress. It is precisely engineered to match the technical standards of alternators used in the Peugeot 405, ensuring vibration-free installation and seamless integration with other system components. Proper operation of this bearing directly contributes to improved alternator efficiency and the maintenance of stable voltage within the vehicle’s electrical system.

Structurally, the Peugeot 405 alternator bearing features a sealed design that prevents the entry of dust, contaminants, and moisture, which helps extend its service life. It comes with permanent internal lubrication, eliminating the need for regular servicing and ensuring consistent performance over time. The balls and retainer cage are manufactured with high precision, allowing the bearing to operate quietly and smoothly, even at high speeds with minimal friction. These characteristics make the Peugeot 405 alternator bearin

Vogiran anti-water hammer spring check valve PN16

The Vogiran anti-water hammer spring check valve PN16 is designed with a compact ductile iron GGG40 body, rated for a nominal pressure of 16 bar. It features a stainless steel spring-loaded disc mechanism that responds instantly to flow changes, closing smoothly to prevent water hammer effects. Internal components, including the disc, spring, and seat, are made of stainless steel to ensure corrosion resistance and durability at temperatures from 0°C to 200°C. The sealing interface utilizes EPDM or NBR elastomers for complete backflow prevention. Designed according to DIN 3202 and EN 12334 standards, it is suitable for horizontal and vertical installations in systems carrying water, air, or light oil.

Depending on the nominal diameter DN50–DN200, the valve weight ranges from 7 to 50 kilograms, with flanges built per EN1092-2 standards. The aerodynamic flow path minimizes pressure loss and provides silent, vibration-free operation. Its interior epoxy coating offers excellent resistance to corrosion, extending the valve’s lifespan in humid environments. This model is ideal for pump discharge lines, water supply systems, and thermal installations exposed to sudden pressure fluctuations. With its fast-closing spring mechanism, tight sealing, and robust construction, the Vogir

Pride car alternator bearing

The alternator bearing for the Pride vehicle is one of the essential and influential components in ensuring the proper operation of the car’s electrical system. Its primary role is to provide mechanical support for the alternator shaft and reduce friction between rotating parts. This bearing is typically made from high-strength alloy steel and undergoes a heat-treatment process to enhance its durability against harsh engine conditions such as high temperatures, continuous vibrations, and constant rotation. It is precisely engineered to meet the technical standards of the Pride alternator, ensuring smooth, quiet, and seamless operation in coordination with other system components.

Structurally, the Pride alternator bearing features a dual-sealed design that effectively blocks dust, contaminants, and moisture from entering the bearing chamber. This sealing extends the bearing’s service life and reduces the risk of damage under adverse environmental conditions. The bearing is internally lubricated with a permanent grease solution, eliminating the need for regular maintenance or servicing. The ball retainer is made from durable materials to maintain stability under high heat and pressure. Altogether, these specifications make the Pride alternator bearing a reliable and long-la

Samand car wheel bearings

The wheel bearing of the Samand vehicle is a crucial component of the suspension and movement system, primarily responsible for reducing friction between the wheel axle and the wheel hub body. This bearing is typically a double-row ball bearing with a sealed design that prevents the ingress of dust, moisture, and contaminants, thereby extending its service life. Its body is made of hardened alloy steel, capable of withstanding high radial and axial loads as well as elevated temperatures. These features enable the Samand wheel bearing to deliver stable and quiet performance under various driving conditions, including high speeds and rough terrains.

Dimensionally, the Samand wheel bearing must fully comply with factory standards to prevent any play or uneven pressure and ensure perfect compatibility with the wheel hub and vehicle suspension system. It features a permanent lubrication system that reduces the need for periodic maintenance and maintains smooth operation by minimizing internal friction. High resistance to shocks and heavy mechanical loads is another key attribute, making this product a suitable choice for enhancing the safety and longevity of components related to the wheel and suspension system of the Samand vehicle. Using a standard, high-quality wheel bearing pla

L90 Car Wheel Bearing

The wheel bearing of the L90 vehicle is a key component in its suspension and movement system, playing a vital role in reducing friction between the wheel hub and the rotating axle. This part is typically a double-row sealed bearing designed to prevent the intrusion of dust, moisture, and other contaminants into the internal components. The bearing’s body is made of hardened alloy steel, which provides high resistance to radial and axial loads as well as elevated temperatures caused by continuous operation. Using a high-quality, standard wheel bearing in the L90 enhances vehicle stability, reduces noise generated by wheel movement, and improves suspension performance.

Dimensionally, the L90 wheel bearing must precisely match factory specifications to avoid any play or uneven pressure within the system. These bearings feature a permanent lubrication system that minimizes the need for periodic maintenance. Additionally, the ability to withstand heavy loads at high speeds is another important technical characteristic of this product. Smooth operation, long service life, and silent performance under various road conditions make this bearing a suitable choice for both urban and intercity vehicles. Selecting the right wheel bearing for the L90 directly impacts safety, fuel efficie

PiroozPak Bearing Packaging Machine

Using the PiroozPak Bearing Packaging Machine is one of the most effective solutions for manufacturers and distributors of industrial components to deliver products in a safe, organized, and standardized manner. PiroozPak, with experience in designing and producing industrial product packaging machines and component packaging machines, offers automatic and semi-automatic models suitable for small workshops and industrial production lines.

This machine can package various bearings and sensitive industrial parts, making the packaging process fast, precise, and efficient. Using the Bearing Packaging Machine ensures that your products:

Are packaged safely and protected

Are shielded from dust, moisture, and physical damage

Have a professional and tidy appearance that builds customer trust

Can include printed product information, production date, and serial numbers

Increase speed and efficiency of production lines

By purchasing the PiroozPak Bearing Packaging Machine, manufacturers can enhance the quality of their industrial products and manage industrial component packaging sales along with installation and support. In addition to bearings, this machine can package other small and sensitive industrial parts. The price of the Bearing Packaging Machine varies depend

Samand car refractory bearing

The heat-resistant bearing for the Samand vehicle is a key component in the suspension and wheel systems, designed with advanced manufacturing technology and high-quality materials to ensure stable and long-lasting performance. Featuring precise engineering and a sealing system resistant to heat, moisture, and contaminants, it effectively prevents the intrusion of dust and liquids into the internal mechanism. This results in an extended service life and reduced maintenance needs. Commonly installed in the front or rear wheels of the Samand, the bearing offers excellent radial and axial load capacity, ensuring reliable operation in both urban and long-distance driving conditions.

From a technical standpoint, the heat-resistant bearing designed for the Samand meets the factory-standard inner and outer diameters required for proper wheel fitment. It is typically manufactured from hardened alloy steel with an anti-corrosion coating, and its internal lubrication consists of a high-temperature grease capable of withstanding up to approximately 200°C. These features, combined with a dual sealing structure, provide exceptional resistance to mechanical stress, wear, and high temperatures. Using a high-quality heat-resistant bearing in a Samand vehicle not only enhances safety but also

Peugeot 206 alternator bearing

The alternator bearing for the Peugeot 206 vehicle is a fundamental component in the car’s electrical system, primarily responsible for reducing friction and providing mechanical support to the rotating shaft of the alternator. This bearing is made from high-quality alloy steel and undergoes a hardening process to ensure sufficient resistance against heat, pressure, and repeated engine vibrations. Its precise design and standardized dimensions ensure smooth and quiet alternator operation under all working conditions, preventing premature failures. Using a high-quality bearing in the Peugeot 206 alternator plays a crucial role in ensuring voltage stability and improving the overall performance of the vehicle’s electrical system.

Structurally, the Peugeot 206 alternator bearing features a dual-sealed system that prevents the entry of dust, moisture, and contaminants into the bearing, thereby increasing the component’s service life. Its internal lubrication is permanent and requires no maintenance or periodic servicing. The ball cage is made from durable materials to withstand mechanical stresses and high temperatures, ensuring stable and quiet operation. These features make the Peugeot 206 alternator bearing a reliable and efficient choice for enhancing the durability and