Hoist

Manual Chain Hoist

Import and distribution of German, Japanese, Korean, and Chinese hand weights in Kariz industrial equipment.
Sale of cranes
Hand crane sale
Hand chain crane for sale
Sale of Vital Weapon hand crane

Manual cranes are very efficient tools in the lifting industry that play an important role in providing lifting power. In manual cranes, the lifting force is obtained by the movement of a chain around the pulley, which is also provided by the chain on the operators hand. In this type of crane, chain beads, which must have a suitable grade of steel, are used to lift the load, and the length of these chains is determined as 3 meters and 6 meters by default in the factory, which can be replaced later.
Manual cranes are used in tonnages of 0.5 ton - 1 ton - 1.5 ton - 2 ton - 3 ton - 5 ton and above.

Hand chain crane 0.5 ton 3 meter chain
Hand chain crane, 1 ton, 3 meter chain
Hand chain crane, 1.5 tons, 3 meters chain
Hand chain crane, 2 tons, 3 meters chain
Hand chain crane, 3 tons, 3 meters chain
Hand chain crane, 5 tons, 3 meters chain
Hand chain crane 0.5 ton 6 meter chain
Hand chain crane, 1 ton, 6 meter chain
1.5 ton chain hand crane, 6 meter chain
Hand chain crane, 2 tons, 6 meters chain
Hand chain crane, 3 tons, 6 meters chain
Hand chain crane, 5 tons, 6 met

chinese vital lever hoist

The design of 800 kg chain lever block is actually a product of China, which is derived from the design of lever blocks of the prestigious VITAL brand of Japan. The 800 gram chain lever block of Vital design is used with a 1.5 meter steel chain which is made of dry G80 grade and is connected to this lever block in the size of 6 mm. The support connection of chain lever block is done through an S-hook or latching hook and is controlled by a manual lever.
The 800 kg weight capacity of this vital design chain lever block is specified as a hanging connection in lifting and it has higher capabilities for pulling loads on a sloping surface in terms of the angle of inclination. This lever block is widely used in workshops and repair shops. In the production of the original examples of the 800 kg chain lever block, a security factor of 5:2 has been used, which makes the Japanese original examples higher in security and longevity. Japans high technology in steel technology has caused the sprocket gears and internal parts of the block of this lever block to have a much higher wear ability and a longer lifespan in the original samples.

Hoist chain

Chain overhead cranes use two chain chains in their connections. The hand chain of the crane is made of galvanized iron and the load chain of the crane is made of dry steel. While the manual chain of the overhead crane is moved by hand, the load chain of the crane is connected to the load and is subjected to high tensile stress. Different sizes of crane chains are used according to the tonnage and weight capacity of the overhead crane, which is often used on 1 ton cranes with 8 mm chain and as the tonnage of the crane increases, the size of the crane chain also increases. Of course, in high-tonnage overhead cranes, a chain is no longer used, and therefore, in most applications, the maximum size of the crane chain is 12 mm.

G80 hoist chain

G80 carbon steel chain is actually an alloy of steel chain. The dry chain uses at least 98% iron element with an average percentage of carbon in its alloy composition. Before the production of G80 dry chain, the used wires are hardened by forging method to have high mechanical characteristics and ideal resistance against tensile and abrasion stresses.
Dry chains are produced both in millimeter sizes according to the German DIN standard and in inch sizes according to the American ASTM standard. G80 dry chain has a tensile strength of 550 newtons per square millimeter N/mm2, which means that it can suspend 55 kg of load per square millimeter of the cross-sectional area at the complete tear stage.

3ton hoist chain

The ceiling crane chain starts from 8 mm size, which is used for both electric and manual chain ceiling cranes, and it is used in higher lifting capacities in higher sizes. On all types of overhead cranes, crane chains in dry grade G80 and higher grades, i.e. grades G100, G120, can be used, while considering the appropriate tensile strength and tensile strength, G80 grade is often used.
3 ton overhead crane chain is used in 10 mm size, which is produced from steel alloy compounds with a high percentage of carbon. The production of this crane chain is done by thermal bending for each bead, which after bending and forming the beads is welded at one point through an electric arc.

electric hoist chain

3-phase electric cranes are produced in both chain and wire rope models, which are recommended for lifting loads from 1 to 10 tons. The 3-phase electric crane chain is a dry steel chain that has high tensile strength and is connected to the crane hook at the bottom. Electric crane chain is used in G80 grade and it is often black in surface alum treatment. 3-phase electric crane chains are used in different sizes that depend on the weight capacity of the crane, and most of them have the smallest size of 8 mm. The chain length of the overhead crane often varies between 3.5 meters and 6 meters, and in most cases, the maximum lifting height of electric chain cranes is 6 meters.

KITO hoist chain

Kito overhead crane hoist in chain type is one of the most ideal workshop lifting tools. Kito chain overhead crane is also produced in manual type, but it has a wider use in three-phase electric type. Kito electric hoist chain is actually a crane load chain that is used in dry steel grade. The length of Kito crane chain is usually 3.5 to 6 meters and its minimum size is 8 mm. KITO ceiling hoist chain is seen in matte black color, which is actually treated with alum or surface phosphate to increase the surface resistance against rust and wear resistance. Japan Kito manual crane chain is used in two grades, one iron grade manually and the other steel grade with a load hook.

KATO 1 ton hoist

Kato electric chain hoist is produced in the lowest weight capacity of 1 ton. This chain hoist is produced both as a 2-way crane with a ceiling hook and as a 4-way crane with a rail trolley. The nominal capacity of the chain crane is 1 ton in the lifting mode with clock and hanger speed and it has a safety factor of 3:2 in the failure test stage.
This electric chain hoist uses a 3-phase electric motor that works with a voltage of 230-400 watts and has a powerful gearbox that works floating in oil. KATO 1 ton electric chain hoist is made in China and can be supplied with 18 months warranty and 15 years of after sales service at Kato Lift.

KATO dual speed chain hoist

The overhead chain hoist is often used for lifting loads at a height of 3 to 6 meters. Double-purpose overhead hoists are often used only in single-speed mode because they do not have the ability to change the horizontal position of the load. 4-way chain overhead cranes, which have an electric carriage trolley for moving the load horizontally, are used both in single-speed and double-speed. The two-speed electric overhead hoist at high speed actually works like a single-speed hoist, and in fact, it is at low speed that it finds its main use in lowering the load and in order to place the load in a very precise position.

CROSBY G120 hoist chain

Crane chain with G120 grade is actually the highest grade of steel in the production of this type of chain in connecting the load with the sling and crane. The highest percentage of carbon is used in the alloy steel of G120 crane chain, which leads to higher mechanical capabilities of this chain. A series of thermal hardening operations in the form of multi-stage cooling and heating are used in order to increase the two quality factors of G120 grade steel crane chain, which finally reaches a tensile strength of over 900 newtons/mm2 N/mm2 and produces a very high wear hardness compared to G80 dry steel crane chain.

G100 hoist chain

The crane chain with G100 grade has a higher carbon percentage than the general G80 grade and has a higher surface hardness and tensile strength. The thermal hardening steps of G100 crane chain are more complex and precise than the G80 grade, and as a result, it leads to an increase in the tensile capabilities under load and wear resistance of this grade of crane chain. In terms of hammerability, it should be said that the presence of a higher percentage of carbon in the alloy compounds of the G100 grade crane chain has caused it to become more brittle, especially in super-cold temperature conditions.

10mm hoist chain

The connecting chain on the overhead crane is selected from high grades of steel to have a suitable tensile strength. In most cases, the G80 steel alloy has the highest usage rate in the joints of overhead cranes, which is used in the size of 8 mm and above. 10 mm steel crane chains are often used on overhead cranes with a capacity of more than 2 tons. This dark black chain is used as surface phosphated to have better environmental resistance against rust. Crane steel chain with G80 grade is produced by hot forging method, and after bending each of the chain beads, it is welded to close the seam.

KATO dual speed hoist

KATO 2 ton electric chain hoist is a product of China, which is produced in accordance with the highest international standards and is being used in 28 countries of the world. Cato 2 ton chain hoist uses a two-speed Dalander electric motor with two different speeds in connection, which has the ability to operate at medium speed like single-speed cranes and at very slow speed. The use of 2-speed chain hoist in installation, assembly or repair of industrial parts and machines is where there is a need to place the part in a very precise location.

demag hoist wire rope

The wire rope of the overhead crane must have different quality characteristics, including high tensile strength, proper flexibility, high abrasion resistance and reversibility. In the connection of electric cranes, 6-strand wire ropes are often used, which are used in smaller sizes as steel cores and in larger sizes as hemp cores in order to reduce interlayer wear. The towing wire of the overhead crane is produced both with a standard texture that has higher tensile strength and with a flood type texture that has more flexibility.

kato 2 ton single phase hoist

Chinas KATO electric chain crane with a weight capacity of 2 tons and a single-phase type actually works with a 210-230 V standard voltage and does not require industrial electricity. KATO single-phase 2-ton chain crane uses a multi-gear block and sprocket gear, which works in connection with a powerful electric motor in the lifting process. In fact, the decrease in phase and input voltage to Catos single-phase 2 ton electric chain crane is compensated by using a powerful electric motor with more coils than the three-phase model.

Hoist 6 strand steel wire rope

Six strand wire ropes are the most common type of wire rope that are used not only as lifting connection for hoist, but also in excavation and with metal core they are wildly used in wire rope sling for lifting purpose as well. 6 strand wire ropes that are used with electric lifting hoist have the structure of 6X19 and can have the standard or SEALE weaving. tensile strength of hoist steel wire rope can vary but in most cases it has the value of 1770 N/mm2. this steel wire rope is also used for lifting and pulling on winches.

VITAL Lever hoist with chain

VITAL lever hoist with chain is one of the most well-known lifting products in the lifting market all over the world. Being produced by Japanese brand Vital which only produced manual lifting equipment such as chain blocks, trolley and lever hoist this product has higher price compared to other Chinese brands of lever hoists. safety feature of 5:2 has been used to produce and test the genuine VITAL lever hoists which means that they have been tested 2.5 times more than their nominal lifting capacity.

Hoist steel chain

Types of steel hoist chains include manual hoist chains and electric hoist chains.
Grade 80, 100 and 120 are among the common grades used in hoist chains.
The use of crane chains is in cargo transportation, which is of G80 type.
Galvanized G30 and G43 types are often used in crane pulley chains.
The capacity and specifications of the steel chain used in the hoist are very important, so the exact size of the chain in proportion to the tonnage of the hoist must be determined.

Japanese VITAL Lever hoist

Japanese VITAL lever hoist is a common and a strong lifting equipment that is produced up to 9 ton of lifting capacity. very high safety feature of 5:2 is used to produce VITAL lever hoists this means that every single lever hoist is tested with 2.5 times its nominal capacity before being delivered to the market. the majority of lever hoists available in the market are Chinese made with similar mechanical design and usually come at a much lower price.

kato 5 ton electric hoist

KATO 5 ton electric chain hoist is widely used in lifting machines and heavy industrial parts in machinery and steel industries. This chain crane works with 3-phase electricity and is a product of China. Kato 5 ton electric hoist is often used as a 4-way hoist with a carriage to create horizontal movement on roof rails or gate rails, although its double-way models with a roof hook and only with the ability Lifting bars are also used in industries.

DEMAG wire rope hoist

Towing electric overhead hoists are used in a more limited way than chain models and are sold in the market with more limited brands. Unlike chain hoists, overhead cranes are only produced electrically and manual cranes cannot be found in the market. Towing wire overhead crane is produced in 3 phases and its single phase examples are found with a single string of steel wire rope and actually an electric winch type in a very low weight range.

Hoist wire rope

Wire rope overhead cranes generally have a more limited use than chain overhead cranes. However, in high lifting tonnage and above 10 tons, it is often easier to use electric towing cranes. On towing cranes, 6 strands of crane towing wire are often used. The crane towing wire is used from size 8 mm and above, and it is made of both standard type weave with wires of equal diameter and also has SEALE type weave.

Vital lever hoist

Vital lever hoist is a mechanical tool much like chain blocks that is used for lifting purposes. the difference between the lever hoists and chain block is that lever hoists have a handle that goes in a reciprocating way to change the length of connecting chain, however, chain blocks have another lower grade chain of G43 to change the length of chain. VITAL lever hoists are produced up to 6 metric tons.

kato single phase 5 ton hoist

KATO single-phase electric crane is produced with a maximum weight capacity of 5 tons. The limitation in the weight capacity of this chain crane is due to the limitation in the input voltage compared to the three-phase models. Kato single phase 5 ton electric chain crane works both connected to city single phase electricity and connected to small generators that produce single phase electricity.

kato 3 ton electric hoist

KATO electric chain hoist with a nominal lifting capacity of 3 tons is offered to the market in 3 phases. This chain crane is equipped with a 10 mm chain made of G80 grade steel, which has a length of 6 meters. Cato electric chain hoist can be supplied as a ceiling hook or two-function and with a ceiling trolley for horizontal movement on the ceiling rails and as 4-function.

kato 10 ton hoist

KATO 10 ton electric chain hoist is often the maximum capacity of this Chinese brand which is imported by Wikilift Group in Iran. Of course, the production of Kato brand chain hoists continues in higher powers and capacities up to 20 tons, but in most industrial applications, chain cranes up to 10 tons are used, and wire rope cranes are used for lifting at higher powers.

KITO 3 phase hoist

KOTI 3 phase hoist is one of the highest and most durable lifting equipment in the market. this lifting hoist uses a very strong Japanese electric motor for lifting purpose and used G80 grade of chain for lifting. in most cases electric chain hoists are produced to be moved in 4 directions and KITO also uses a very strong trolley for this purpose.

1 ton single phase hoist KATO

KATO single-phase electric chain cranes that work with city electricity are produced in 1 to 5 ton capacities. KATO 1 ton electric crane is a product of China and it is used as chain type and 2 functions with ceiling hook. This chain crane uses a steel chain in size 8 mm and 6 meters long with steel grade G80 in lifting and connected to the load.

hoist steel chain

Steel chain is one of the most used tools in lifting bar. Steel chains in G80, G100, G120 grades are used for lifting loads with cranes. Of course, in addition to connecting on cranes, steel chains are also used to produce single and multi-branch slings that are used for lifting with cranes, lever block connections and electric winches.

1.6 ton vital lever hoist

1.6 ton VITAL lever hoists is tested with 2.5 times its nominal lifting capacity in case it is the genuine Japanese product. this lever hoist uses a G80 alloy steel chain to connect to the load and is handled by one hand. all kinds of lever hoists require a leaning and attaching surface and use a fixed hook for this purpose.

Lever hoist

Lever hoist is a mechanical tool that is produced either with chain or wire rope. lever hoists have the ability to hold high weights at a certain position and are therefore used in construction industry very often. the most well-known manufacturer of lever hoists in VITAL that is a Japanese brand.

Chain lever hoist

Chain lever hoist is a kind of lifting equipment that is usually available in various capacity up to 6.3 ton. VITAL is one of the most well-known manufacturers of lever hoists in the world. lever hoist is a mechanical equipment that performs without any need to electric power.

4D electric hoist

4D electric hoist is a lifting equipment available in various lifting capacity up to 10 tons. electric chain blocks are sometimes used in 2 dimensional design with a hook and more often with a trolley to be able to move the load in X dimension too.

wire rope lever hoist

Wire rope lever hoist is a specific type of lifting equipment that resembles much like Tirfors. there is a handle designed on top of the wire rope lever hoist that changes the length of wire rope engaged within the equipment.

Hoist wire rope 6X19S

Hoist wire rope is in fact the same type of steel wire rope that is used in excavating industry. hoist wire ropes are used mostly in higher diameter than 8 mm and both with fiber and metal core.

chain hoist

chain hoist