Belt

Polycord belt with polyester core

Polycord belt with polyester reinforcement is a multi-layer power transmission belt designed for high-precision applications requiring stable tensile performance. The outer layer is made of thermoplastic polyurethane with a hardness between 90 and 95 Shore A, offering excellent resistance to abrasion, tearing, and chemical exposure. A reinforced polyester core is embedded within the belt to absorb tensile loads and minimize long-term elongation. Standard diameters typically range from 5 to 15 millimeters, with tensile strength measured between 70 and 100 megapascals. These belts operate reliably within a temperature range of -15 to +80 degrees Celsius and support accurate thermal welding for seamless joining.

The polyester core in the polycord belt improves performance in systems with frequent starts and stops by preventing undesired longitudinal stretch. Required initial tension during installation is typically lower than non-reinforced belts, defined between 3% and 5%. This reduces bearing loads and extends the service life of mechanical components. Polycord belts with polyester reinforcement are ideal for packaging machinery, robotics, precision automation systems, and conveyors with sensitive positioning requirements. The maximum permissible linear speed is up to 30 meters

Industrial belt price

The price of industrial belts is influenced by various factors such as the raw material type, thickness, width, and length of the belt. Industrial belts are typically made from polyurethane, rubber, or neoprene, each having different price points. Belt thickness ranges from 2 to 10 millimeters, with each additional millimeter increasing the price by approximately 5 to 10 percent. Additionally, the belt width directly affects the price wider belts generally cost more. The belt length is usually calculated per square meter, and the final price is determined based on the customers order. In the market, the price of welding wire is also considered as a comparative benchmark when estimating total project costs.

International standards such as DIN 2215 and ISO 4184 significantly impact the quality and price of industrial belts. Standard belts feature tensile strength up to 2000 Newtons per millimeter and can withstand temperatures between -20 and +80 degrees Celsius. Manufacturing quality, abrasion resistance, and chemical resistance also influence the belt’s price. Abrasion-resistant and oil-resistant belts are priced higher than regular types. Ultimately, the price of welding wire and industrial belts should be evaluated based on quality and project requirements to optimize cost

Timing belt L

The L timing belt is a common model used in power transmission systems requiring moderate precision, designed for industrial and automotive applications. These belts are typically made of neoprene rubber reinforced with fiberglass fibers, providing tensile strength between 1200 and 2500 Newtons. The tooth pitch of the L timing belt is 9.525 millimeters, and the teeth have a trapezoidal angle designed for smooth operation with standard pulleys of this series. The belt width varies from 6 to 30 millimeters, with an overall thickness of about 5 millimeters. This belt is suitable for transmitting power at moderate speeds within a temperature range of -20 to +90 degrees Celsius.

In the design of the L timing belt, precision tooth molding plays a key role in preventing slippage and increasing belt lifespan. The expected service life of these belts ranges from 3000 to 8000 hours under standard operating conditions. Wear and oil resistance are enhanced using special coatings. The belt’s flexibility allows its use in both open and closed circuits with a minimum bending radius of 30 millimeters. These engineering specifications make the L timing belt an ideal choice for mechanical systems requiring moderate synchronization and low cost.

OPTIBELT DELTA CHAIN ​​Carbon polyurethane timing belt

The OPTIBELT DELTA CHAIN Carbon polyurethane timing belt represents one of the most advanced generations of industrial timing belts, offering exceptional performance in power transmission and tensile strength thanks to its multi-layered structure and carbon fiber reinforcement technology. The belt is made of wear-resistant, high-temperature polyurethane and features a carbon core to ensure maximum stability against stretching, deformation, and tearing. Its precisely engineered tooth profile is compatible with standard industrial pulleys, enhancing efficiency and reducing noise in mechanical systems.

A standout feature of this belt is its extremely long service life, even under high loads and at high speeds, making it an ideal choice for industrial machinery, automation systems, packaging equipment, and other precision-driven applications. Additionally, its excellent resistance to oil, chemicals, and UV radiation allows for reliable performance in harsh industrial environments and variable working conditions. The belts maintenance-free operation, easy installation, and reduced overall upkeep costs are further advantages that make the DELTA CHAIN Carbon a highly competitive solution.

ALPHA optibelt polyurethane timing belt

The ALPHA Optibelt polyurethane timing belt is an advanced power transmission product designed with cutting-edge technology and high-quality materials. Made from abrasion-resistant polyurethane, it offers excellent resistance to oil, moisture, and high temperatures. Internally, it is reinforced with steel cords or aramid cables that ensure outstanding tensile strength and extended service life. The belt’s teeth are precisely engineered to fully engage with matching pulleys, preventing slippage and ensuring perfect synchronization in motion control systems.

The ALPHA Optibelt polyurethane timing belt is widely used in heavy industrial applications, automated systems, CNC machines, production lines, and packaging industries. These belts offer high strength, optimal flexibility, and excellent resistance to dynamic fatigue, making them ideal for continuous and high-speed operations. Their use reduces maintenance costs and downtime while enhancing operational accuracy, consistent power transmission, and overall system efficiency. Additionally, the belt can be customized in terms of length, width, and tooth profile, making it suitable for a wide range of industrial requirements.

Welded belt bridge

Poly-coated welded flat bar is a type of steel strip protected with a polymer coating, offering high resistance to corrosion and wear. It is made from carbon steel with a carbon content of 0.18 to 0.28 percent and has a tensile strength ranging from 400 to 550 megapascals. The width of the poly-coated strip typically ranges from 25 to 150 millimeters, with a thickness between 3 and 8 millimeters. Dimensional tolerances are maintained at ±0.4 millimeters in width and ±0.15 millimeters in thickness. The polymer coating, applied uniformly at a thickness of 50 to 100 microns, enhances surface mechanical properties besides providing protection.

The manufacturing process of the poly-coated welded flat bar includes resistance or laser welding of the steel sheet, followed by polymer coating application through spraying or dipping methods. The surface hardness ranges from 130 to 190 Brinell, with capabilities for cold bending, precise punching, and UV resistance. This product is produced according to international standards such as ASTM A572 and DIN EN 10142, widely used in automotive industries, agricultural equipment manufacturing, and corrosion-resistant structural applications.

Komatsu belt tensioner

The Komatsu belt tensioner is made of high-strength steel with an anti-corrosion coating and can withstand tensile forces up to 2,500 N. The shaft diameter is 25 millimeters, and the overall body length is 180 millimeters, allowing precise installation on the engine and pulleys. The internal spring is designed with a resistance of 1,200 N, maintaining constant pressure on the belt for up to 15,000 operating hours. Double-sided bearings with initial lubrication can handle rotational speeds up to 4,000 RPM, ensuring smooth movement and reduced friction of the belt. Its ergonomic and reinforced design minimizes vibration and belt wear, extending the overall system lifespan.

The belt tensioner allows both manual and automatic belt pressure adjustment and is compatible with Komatsu diesel and gasoline engines. It weighs 1.8 kilograms, and its quick-mount design facilitates easy replacement and maintenance. The spring and tensioner arm travel up to 25 millimeters, compensating for belt stretch under varying working conditions. Stable performance in ambient temperatures from -20 to 90°C and resistance to vibration and shock maximize system efficiency and belt longevity.

Timing belt open circuit

The open circuit timing belt is a key component in power transmission and position control systems used in industrial machinery and automation equipment. Unlike endless belts, it is produced without a loop and typically supplied in rolls or custom-cut lengths. This open design allows users to cut the belt precisely to the required system length. Featuring accurately spaced teeth designed to mesh perfectly with timing pulleys, the belt is commonly made from polyurethane reinforced with Kevlar or steel cords, ensuring high tensile strength, precise motion control, and long-lasting durability.

Open circuit timing belts are widely used in linear motion systems, industrial printers, CNC machines, packaging equipment, and robotic applications. These belts offer excellent resistance to wear, oil, chemicals, and harsh environmental conditions. Their maintenance-free operation and easy installation make them a cost-effective choice. Additionally, the availability of various tooth profiles and the ability to support applications that require precise positioning make the open circuit timing belt a reliable and flexible solution for engineers and industrial designers.

V-belt with grooves

The ribbed V-belt Ribbed V-Belt combines the advantages of flat belts and traditional V-belts, designed for high-speed power transmission. This belt features multiple parallel ribs on its inner surface, increasing contact area with the pulley and enhancing grip. The belt width typically ranges from 15 to 40 millimeters, with a thickness between 3 to 6 millimeters. Its structure is made of synthetic rubber reinforced with internal tension fibers, offering tensile strength up to 1400 Newtons per millimeter of width. The rib angle is designed within a standard range of 40 to 45 degrees.

The ribbed V-belt can operate at rotational speeds up to 12,000 RPM and maintains stable performance within a temperature range of -30 to +100 degrees Celsius. The parallel ribs reduce vibration and increase flexibility in power transmission systems. This belt is suitable for small-diameter pulleys and requires less installation space than conventional belts. It also provides high resistance to oil, abrasion, and environmental wear. Common applications include industrial equipment, automotive systems, and HVAC units. Its design complies with ISO 9982 and DIN 7867 standards.

Rubber timing belt with two gears

The rubber closed-loop double-sided timing belt is a precise and reliable power transmission component widely used in mechanical systems and industrial automation. Its core structure consists of durable rubber compounds typically neoprene or HNBR reinforced with materials like fiberglass or aramid fibers. The key feature of this belt is the presence of teeth on both sides, allowing it to simultaneously transmit power in two different directions. This dual-sided design significantly enhances performance in systems that require synchronized, bi-directional motion.

The tooth profile is usually trapezoidal or curvilinear, ensuring high engagement accuracy with the pulley and preventing slippage. It is also highly resistant to heat, abrasion, and industrial oils. Since the belt is closed-loop, its length is fixed and usually customized to suit the specific requirements of each system, making accurate selection essential. The double-sided rubber timing belt is an ideal choice for applications such as printing machinery, packaging equipment, and robotic systems where precise and simultaneous power transmission is required in multiple directions.

Megadyne PU welded timing belt T10 PAZ

Megadyne PU welded timing belt T10 PAZ is manufactured from durable thermoplastic polyurethane reinforced with steel or Kevlar cords, providing high tensile strength and long-lasting durability. The belt features a 10 millimeter pitch tooth profile with the PAZ series design, ensuring uniform torque and power transmission in medium-duty industrial systems and precision production lines. Its operating temperature ranges from -20 to +80 degrees Celsius, with excellent resistance to wear, oil, and moisture. Standard belt widths typically range from 16 to 100 millimeters, and thermal welding allows the creation of customized endless loops.

Due to its precise tooth design and high dimensional accuracy, this belt is ideal for packaging machinery, automated assembly lines, and precision power transmission systems. The polyurethane compound with a low friction coefficient reduces energy consumption and improves system efficiency. The broad tooth contact surface ensures uniform force distribution and minimizes vibration at high speeds. Customization in belt length and width provides significant flexibility for specialized industrial applications.

Megadyne PU welded timing belt RPP14

Megadyne PU welded timing belt RPP14 is manufactured from durable thermoplastic polyurethane reinforced with steel or Kevlar cords, providing high tensile strength and long service life. The belt features a tooth profile with a 14 millimeter pitch, ensuring uniform torque and power transmission in heavy-duty industrial systems and high-load production lines. Its operating temperature ranges from -20 to +100 degrees Celsius, with excellent resistance to wear, oil, and moisture. Standard belt widths typically range from 25 to 115 millimeters, and thermal welding allows production of endless loop belts.

Due to its high dimensional accuracy and precisely engineered tooth design, this belt is ideal for heavy industrial machinery, automated production lines, and precision power transmission systems. The polyurethane compound with a low friction coefficient reduces energy consumption and improves system efficiency. The broad tooth contact surface ensures uniform force distribution and reduces vibration at high speeds. Additionally, customization in belt length and width provides significant flexibility for specialized industrial applications.

Megadyne Polyurethane Timing Welded Belt T10

Megadyne T10 polyurethane welded timing belt is manufactured from high strength thermoplastic polyurethane and engineered for medium to heavy torque transmission. The belt features a 10 millimeter pitch with reinforced teeth and standardized profile, reducing slippage and enhancing positioning accuracy in power transmission systems. Embedded helical steel cords ensure high tensile strength and longitudinal stability, preventing deformation under continuous load. Its operating temperature range from minus 25 to plus 80 degrees Celsius allows reliable performance in diverse industrial environments.

The outer surface of the Megadyne T10 polyurethane welded timing belt is resistant to abrasion, oils, and chemicals, making it suitable for medium to high speed production lines. Endless welding capability enables fast installation without mechanical fasteners. Transmission efficiency above 97 percent and low noise operation improve productivity and extend mechanical equipment lifespan. Designed according to DIN ISO 5296 standards, this belt ensures full compatibility with standardized timing pulleys and precise system performance.

Optibelt RR PLUS poly cord belt

The Optibelt RR PLUS poly cord belt is a round polyurethane belt with enhanced mechanical strength and improved wear resistance. It is manufactured in diameters from 3 to 20 millimeters with a Shore A hardness between 85 and 98. Its tensile strength exceeds 35 Newtons per square millimeter, providing higher load transmission capacity compared to the standard RR version. The operating temperature range is from minus 35 to plus 85 degrees Celsius, making it suitable for heavy-duty industrial applications. Excellent flexibility and strong resistance to industrial oils and light chemicals extend its service life.

The Optibelt RR PLUS poly cord belt is supplied in roll lengths and can be end-to-end welded using special thermal tools. The minimum recommended pulley diameter is 12 times the belt cross-sectional diameter. This design reduces stress concentration and ensures stable performance under cyclic loading. Lightweight construction and slip-free transmission are key features of this belt. It is widely used in heavy packaging machinery, industrial conveyor systems, and automated production lines requiring high precision.

Conveyor belt for use in snowy and cold areas

The conveyor belt designed for snowy and cold regions is made from materials resistant to low temperatures and harsh environmental conditions to ensure stable and uninterrupted performance even at subzero temperatures. These belts are typically constructed from polyurethane or specialized rubber compounds with additives that prevent cracking and stiffness caused by cold, maintaining flexibility in freezing conditions. The belt surface is coated with anti-slip and wear-resistant layers to provide high traction on icy and snowy surfaces, enhancing safety and stability during material transport.

Structurally, these belts offer high resistance to abrasion and tearing, chemical resistance against de-icing agents and salts, and the ability to withstand mechanical stresses in tough environmental settings. Their design supports operation at varying speeds and long lengths while resisting freezing and corrosion. Using these belts in mining, transportation, and material processing industries in cold regions increases efficiency, reduces maintenance costs, and guarantees continuous conveyor system performance.

Megadyne PU welded timing belt TK10 K13

Megadyne PU welded timing belt TK10 K13 is manufactured from thermoplastic polyurethane reinforced with steel or Kevlar cords, providing high tensile strength and long-lasting wear resistance. The belt features a 10 millimeter pitch tooth profile with the K13 series design, suitable for transmitting medium to high torque in industrial systems and precision production lines. Its operating temperature range is -20 to +80 degrees Celsius, offering excellent resistance to oil, moisture, and abrasion. Belt widths typically range from 20 to 100 millimeters, and thermal welding enables the production of endless loops.

Due to its high dimensional accuracy and engineered TK tooth design, this belt delivers uniform power transmission at high speeds. The combination of polyurethane with a low friction coefficient minimizes energy losses and improves system efficiency. The broad contact surface and precise pitch reduce vibration and extend the service life of pulleys and engaged gears. Customization in belt length and width provides significant flexibility for specialized industrial and automation applications.

polyurethane conveyor belt model ER12/2 - 00+03

The polyurethane conveyor belt model ER12/2 - 00+03 consists of two layers of reinforced polyester fabric with a tensile strength of 12 N/mm. Its top surface is made of transparent polyurethane with a 0.3 mm thickness, offering excellent resistance to abrasion, tearing, and industrial oils. The total belt thickness is approximately 3.0 mm, with a surface weight of about 3.1 kg/m². The surface friction coefficient is 0.65 in dry and 0.48 in wet conditions. This belt is designed for medium to heavy-duty conveying in food processing, packaging, and logistics industries.

The ER12/2 - 00+03 polyurethane belt operates reliably within a temperature range of -10°C to +100°C. The minimum recommended pulley diameter is 40 mm, making it suitable for robust conveying systems. Its bottom layer is engineered with low friction to ensure smooth, stable, and quiet operation. Tear resistance according to DIN 22102 is approximately 250 N/mm. This belt meets FDA and EU 10/2011 requirements for direct food contact and provides strong durability against moisture, repeated washing, and mild chemical exposure.

Megadyne PU welded timing belt with H-profile

Megadyne PU welded timing belt with H-profile is manufactured from durable thermoplastic polyurethane reinforced with steel or Kevlar cords, providing high tensile strength and long service life. The belt features H-shaped teeth with specific depth and width, ensuring uniform torque and power transmission in industrial systems. The tooth pitch complies with international standards, offering high precision alignment with pulleys and gears. Its operating temperature ranges from -25°C to +80°C, with excellent resistance to wear, oil, and chemical exposure.

Due to its precise engineering and H-profile structure, this belt is suitable for sensitive industrial applications, automated production lines, conveyor systems, and precision drives. The low friction coefficient of polyurethane reduces energy consumption and improves system efficiency. Customization in belt length and width, along with thermal splicing capability, provides high flexibility for specialized industrial environments. The broad tooth contact surface minimizes vibration and extends the service life of pulleys and engaged gears.

polyurethane conveyor belt model EM6/2 - 00+T21

The polyurethane conveyor belt model EM6/2 - 00+T21 consists of two layers of polyester fabric with a tensile strength of 6 N/mm. Its top surface features a matte polyurethane coating with a 0.8 mm thickness, providing excellent resistance to abrasion, oils, and fats. The total belt thickness is approximately 2.6 mm with a surface weight of 2.3 kg/m². The friction coefficient is 0.55 in dry and 0.4 in wet conditions. This belt is engineered for high-precision conveying in food, pharmaceutical, and packaging industries, ensuring consistent performance at medium to high speeds.

The EM6/2 - 00+T21 polyurethane belt operates reliably within a temperature range of -15°C to +90°C. The minimum pulley diameter for optimal installation is 25 mm, making it suitable for compact systems. Its bottom layer is designed with low friction to guarantee smooth and silent movement. Tear resistance according to DIN 22102 is approximately 180 N/mm. This belt meets FDA requirements for direct food contact and provides strong resistance against moisture, mild chemicals, and repeated washing cycles.

PU 85A industrial round belt with Kevlar reinforcement

The PU 85A industrial round belt with Kevlar reinforcement is manufactured from thermoplastic polyurethane with a hardness of 85 Shore A, suitable for power transmission in medium to heavy duty systems. The internal Kevlar fibers ensure high tensile strength and minimal elongation under load, increasing the belt’s durability under demanding conditions. Standard diameters range from 4 to 20 millimeters, with custom dimensions available for specific industrial applications. Its smooth surface and green color reduce friction and enhance power transmission efficiency in rotating systems.

This polyurethane round belt operates effectively within a temperature range of minus 30 to plus 80 degrees Celsius, maintaining stability across diverse industrial environments. Its high chemical resistance against oils, greases, and common industrial substances extends operational lifetime. The green color and smooth surface allow quick identification in production lines, minimizing errors. The belt is widely used in packaging, printing, medium to heavy conveying systems, and textile machinery.

Megadyne PU welded timing belt RPP5

Megadyne PU welded timing belt RPP5 is manufactured from durable thermoplastic polyurethane reinforced with steel or Kevlar cords, providing high tensile strength and long-lasting durability. The belt features a tooth profile with a 5 millimeter pitch, ensuring uniform torque and power transmission in small to medium industrial systems. Its operating temperature range is -20 to +80 degrees Celsius, offering excellent resistance to wear, oil, and moisture. Belt widths typically range from 10 to 50 millimeters, and thermal welding allows the production of customized endless loops.

Due to its precise tooth design and high dimensional accuracy, this belt is ideal for packaging machinery, automated assembly lines, and precision power transmission systems. The polyurethane compound with a low friction coefficient reduces energy consumption and improves system efficiency. The tooth contact surface ensures uniform force distribution and minimizes vibration at high speeds. Customization in belt length and width provides significant flexibility for specialized industrial applications.

EX10/2 - 0+T24 PVC petroleum AS 2.5 Optibelt conveyor belt

The EX10/2 - 0+T24 PVC petroleum AS 2.5 Optibelt conveyor belt is made of polyvinyl chloride with a thickness of 2.5 mm and heat resistance up to 90°C. Its standard width is 240 mm and it can carry loads up to 400 kg per meter. The internal EP fabric layer has a reinforced two-layer structure, providing tensile strength of 10 MPa and high mechanical durability. This belt is designed for transporting petroleum and its derivatives, offering significant chemical resistance against oil, grease, and hydrocarbons. The wear-resistant PVC surface and high flexibility increase the operational lifespan of the belt.

The belt has a smooth surface with controlled friction, optimized for operation between -20°C and +80°C. Its specific weight is 1.35 kg per square meter, with an estimated operational lifespan of 4 years. Tensile strength is 3500 N per 50 mm, with elongation under full load below 2%. The two-layer structure with PVC coating ensures uniform material transfer and easy installation. Crack resistance and quiet operation are key features of this industrial product.

Megadyne double-sided timing belt model T10 260 DD

The Megadyne double-sided timing belt model T10 260 DD is made of thermoplastic polyurethane with a hardness of 92 Shore A, featuring 40-degree angled teeth with a 10 mm pitch. The total belt length is 260 mm, containing 26 teeth that provide precise power transmission and synchronous motion in both directions. The overall thickness is 5.5 mm, and the width typically ranges from 15 to 25 mm. Internal reinforcement cords are made of stainless steel or fiberglass to ensure high tensile strength and long-term dimensional stability. This belt is suitable for industrial machinery, precision automation systems, and robotic equipment.

The Megadyne T10 260 DD double-sided timing belt performs reliably within a temperature range of -25°C to +80°C. Its polyurethane surface is resistant to abrasion, oils, and mild chemicals. Power transmission efficiency exceeds 97%, with very low operational noise. This belt is designed for applications requiring precise synchronization and bidirectional motion, delivering dependable performance in medium to high-speed industrial systems.

polyurethane conveyor belt model ER12 - 0+S10

The polyurethane conveyor belt model ER12 - 0+S10 is made of a reinforced polyester layer with a tensile strength of 12 N/mm. Its top surface consists of a soft polyurethane coating with a 1.0 mm thickness, providing high grip and effective impact absorption for heavy loads. The total belt thickness is approximately 3.2 mm, with a surface weight of 3.0 kg/m². The surface friction coefficient is 0.68 in dry and 0.5 in wet conditions. This belt is designed for heavy-duty conveying in food processing, packaging, and logistics industries, ensuring excellent mechanical stability.

The ER12 - 0+S10 polyurethane belt performs reliably in a temperature range from -15°C to +100°C. The minimum pulley diameter for proper installation is 40 mm. Its bottom surface is engineered with low friction to guarantee smooth and vibration-free movement. Tear resistance according to DIN 22102 is approximately 250 N/mm. This model complies with FDA and EU 10/2011 standards for direct food contact and provides excellent resistance to moisture, fats, and industrial cleaning agents.

Megadyne double-sided timing belt model T10 530 DD

The Megadyne double-sided timing belt model T10 530 DD is made of thermoplastic polyurethane with a hardness of 92 Shore A, featuring 40-degree angled teeth with a 10 mm pitch. The total belt length is 530 mm, containing 53 precise teeth that ensure accurate power transmission and synchronous motion in both directions. The overall thickness is 5.5 mm, and the width typically ranges from 15 to 30 mm. Internal reinforcement cords are made of stainless steel or fiberglass to maintain long-term tensile strength and dimensional stability. This belt is suitable for industrial machinery, automation systems, and robotic equipment.

The Megadyne T10 530 DD double-sided timing belt performs reliably within a temperature range of -25°C to +80°C. Its polyurethane surface is resistant to abrasion, oils, and mild chemicals. Power transmission efficiency exceeds 97%, with very low operational noise. This belt is designed for applications requiring precise synchronization and bidirectional motion, delivering dependable performance in medium to high-speed industrial systems.

EM10/2 - 0+T6 PVC petroleum AS 5.0 Optibelt conveyor belt

The EM10/2 - 0+T6 PVC petroleum AS 5.0 Optibelt conveyor belt is made of polyvinyl chloride with a thickness of 5 mm and heat resistance up to 90°C. Its standard width is 60 mm and it can carry loads up to 200 kg per meter. The internal EP fabric layer has a reinforced two-layer structure, providing tensile strength of 10 MPa and high mechanical durability. This belt is designed for transporting petroleum and its derivatives, offering high chemical resistance against oil, grease, and hydrocarbons. The wear-resistant PVC surface and high flexibility increase the operational lifespan of the belt.

The belt has a smooth surface with controlled friction, optimized for operation between -20°C and +80°C. Its specific weight is 1.4 kg per square meter, with an estimated operational lifespan of 5 years. Tensile strength is 2000 N per 50 mm, with elongation under full load below 2%. The two-layer structure with PVC coating ensures uniform material transfer and easy installation. Crack resistance and quiet operation are key features of this industrial product.

Optibelt SPB 1000 V-belt

The Optibelt SPB 1000 V-belt is designed with a nominal length of 1000 mm and an SPB profile according to ISO standards. It is manufactured from abrasion-resistant rubber reinforced with polyester tensile cords, ensuring high tensile strength and precise dimensional stability. The belt’s side profile features a standard 40-degree angle, enhancing effective friction and providing stable power transmission under heavy load conditions. Advanced Optibelt technology improves crack resistance and reduces heat buildup during operation.

The SPB 1000 belt operates reliably within a temperature range of -30 to +90 °C, making it ideal for power transmission in industrial motors, compressors, pumps, and heavy machinery. Its high efficiency reduces energy consumption and extends the service life of system components. The precise SPB profile design allows optimal alignment with standard pulleys, preventing slippage at high speeds. Due to its durability and superior performance, this product is a trusted choice for steel, mining, and continuous production industries.

Megadyne PU welded timing belt RPP8

Megadyne PU welded timing belt RPP8 is manufactured from durable thermoplastic polyurethane reinforced with steel or Kevlar cords, providing high tensile strength and long-lasting durability. The belt features a tooth profile with an 8 millimeter pitch, ensuring uniform torque and power transmission in small to medium industrial systems. Its operating temperature range is -20 to +80 degrees Celsius, with excellent resistance to wear, oil, and moisture. Belt widths typically range from 10 to 50 millimeters, and thermal welding enables the production of endless loops.

Due to its precise engineering and high dimensional accuracy, this belt is an ideal solution for packaging machinery, automated assembly lines, and precision power transmission systems. The tooth design ensures uniform force distribution and reduces vibration at high speeds. The polyurethane compound with a low friction coefficient minimizes energy consumption and improves system efficiency. Customization in belt length and width provides significant flexibility for specialized industrial applications.

Megadyne PU welded timing belt TL20

Megadyne PU welded timing belt TL20 is manufactured from thermoplastic polyurethane reinforced with steel or Kevlar cords, ensuring mechanical strength and long-lasting durability. The belt features a precise tooth profile with a 20 millimeter pitch, allowing power transmission in heavy-duty industrial systems and high-torque production lines. Its operating temperature range is -20 to +80 degrees Celsius, with excellent resistance against wear, oil, and moisture. Standard widths range from 25 to 150 millimeters, and thermal welding enables the production of endless loops.

Due to its deep tooth design and large pitch, this belt is capable of transmitting power at high speeds and under heavy loads. Its outstanding dimensional accuracy reduces vibration and extends the service life of pulleys and engaged components. The polyurethane compound with its low friction coefficient minimizes energy losses and enhances system efficiency. Furthermore, customization in both belt length and width provides high flexibility for specialized industrial and automation applications.

MEGADYNE timing belt meter

The MEGADYNE timing belt by the meter is an advanced and flexible solution for power transmission in industrial machinery, offering the convenience of being cut and adjusted to the desired length based on user requirements. These belts are typically made from high-quality, wear-resistant polyurethane, which provides excellent durability against abrasion, tearing, oils, and industrial chemicals. The inner core of MEGADYNE belts is reinforced with steel or aramid cords to maintain long-term tensile stability and ensure precise motion control while preserving flexibility.

The toothed surface of these belts is engineered with precision using standard profiles such as T, AT, or HTD to maximize engagement with timing pulleys and eliminate slippage. These timing belts by the meter are ideal for use in conveyor systems, automation equipment, industrial printers, and packaging machines. The ability to customize length and easily fabricate closed-loop belts is another key technical advantage, making them a perfect choice for continuous and adaptable production lines.

Megadyne PU welded timing belt AT10

Megadyne PU welded timing belt AT10 is manufactured from durable thermoplastic polyurethane reinforced with steel or Kevlar cords, providing high mechanical strength and stability. The belt features a precise 10 millimeter pitch tooth profile, enabling accurate power transmission under heavy-duty working conditions. Its operating temperature range is -20 to +80 degrees Celsius, offering excellent resistance to wear, oil, and moisture. Standard widths vary from 16 to 100 millimeters, and thermal welding allows the production of endless loop belts.

Thanks to its engineered AT tooth design, this belt is capable of transmitting uniform torque at high speeds and under heavy industrial loads. Its high dimensional accuracy minimizes vibration and extends the service life of pulleys and engaged gears. The polyurethane compound with its low friction coefficient reduces energy losses and improves overall system efficiency. Additionally, customization in both length and width provides significant flexibility for specialized industrial applications and production lines.

Megadyne polyurethane timing belt model AT10 800

The Megadyne polyurethane timing belt model AT10 800 is made from thermoplastic polyurethane with a hardness of 92 Shore A, featuring 40-degree angled teeth with a 10 mm pitch. The total belt length is 800 mm, containing 80 precision teeth that ensure accurate power transmission and synchronous motion. The overall thickness is 5.5 mm, and the width ranges between 15 and 30 mm depending on the application. Internal reinforcement cords are made of stainless steel or fiberglass to provide high tensile strength and long-term dimensional stability. This belt is suitable for industrial machinery, CNC equipment, and precision automation systems.

The Megadyne AT10 800 timing belt operates reliably within a temperature range of -25°C to +80°C. Its polyurethane surface is resistant to abrasion, oils, and mild chemicals. Power transmission efficiency exceeds 97%, with very low operational noise. The belt is designed for applications requiring precise synchronization and smooth motion, delivering dependable performance in medium to high-speed industrial systems.

EX10/2 - 0+T32 PVC petroleum AS Optibelt conveyor belt

The EX10/2 - 0+T32 PVC petroleum AS Optibelt conveyor belt is made of polyvinyl chloride with a thickness of 4 mm and heat resistance up to 90°C. Its standard width is 320 mm and it can carry loads up to 600 kg per meter. The internal EP fabric layer has a reinforced two-layer structure, providing tensile strength of 10 MPa and high mechanical durability. This belt is designed for transporting petroleum and its derivatives, offering high chemical resistance against oil, grease, and hydrocarbons. The wear-resistant PVC surface and high flexibility increase the operational lifespan of the belt.

The belt has a smooth surface with controlled friction, optimized for operation between -20°C and +80°C. Its specific weight is 1.45 kg per square meter, with an estimated operational lifespan of 5 years. Tensile strength is 5000 N per 50 mm, with elongation under full load below 2%. The two-layer structure with PVC coating ensures uniform material transfer and easy installation. Crack resistance and quiet operation are key features of this industrial product.

Megadyne polyurethane timing belt model AT10 500

The Megadyne polyurethane timing belt model AT10 500 is made of thermoplastic polyurethane with a hardness of 92 Shore A, featuring 40-degree angled teeth with a 10 mm pitch. The total belt length is 500 mm, containing 50 precision teeth that ensure accurate power transmission and synchronous motion. The overall thickness is 5.5 mm, and the width varies between 15 and 30 mm depending on the application. Internal reinforcement cords are made of stainless steel or fiberglass to provide high tensile strength and long-term dimensional stability. This belt is suitable for industrial machinery, CNC equipment, and precision automation systems.

The Megadyne AT10 500 timing belt performs reliably within a temperature range of -25°C to +80°C. Its polyurethane surface is resistant to abrasion, oils, and mild chemicals. Power transmission efficiency exceeds 97%, with very low operational noise. This belt is designed for applications requiring precise synchronization and smooth motion, delivering dependable performance in medium to high-speed industrial systems.

Megadyne PU welded timing belt ATL5

Megadyne PU welded timing belt ATL5 is manufactured from thermoplastic polyurethane reinforced with steel or Kevlar cords, providing high tensile strength and long-lasting durability. The belt features a precise 5 millimeter pitch tooth profile, designed for accurate power transmission in small to medium-sized systems. Its operating temperature range is -20 to +80 degrees Celsius, with excellent resistance to wear, oil, and moisture. Standard widths range from 10 to 50 millimeters, and thermal welding allows production of endless loop configurations.

Due to its high dimensional accuracy and excellent flexibility, this belt is ideally suited for packaging machinery, medical equipment, and light assembly lines. The precise tooth geometry ensures uniform power transmission and reduces vibration at higher speeds. The polyurethane compound with a low friction coefficient minimizes energy losses and increases overall system efficiency. Furthermore, customization in both belt length and width provides greater adaptability for specialized industrial applications.

Megadyne double-sided timing belt model T10 700 DD

The Megadyne double-sided timing belt model T10 700 DD is made of thermoplastic polyurethane with a hardness of 92 Shore A, featuring 40-degree angled teeth with a 10 mm pitch. The total belt length is 700 mm, containing 70 precise teeth that ensure accurate power transmission and synchronous motion in both directions. The overall thickness is 5.5 mm, and the width typically ranges from 15 to 30 mm. Internal reinforcement cords are made of stainless steel or fiberglass to ensure long-term tensile strength and dimensional stability. This belt is suitable for industrial machinery, automation systems, and robotic equipment.

The Megadyne T10 700 DD double-sided timing belt operates reliably within a temperature range of -25°C to +80°C. Its polyurethane surface resists abrasion, oils, and mild chemicals. Power transmission efficiency exceeds 97%, with very low operational noise. This belt is designed for applications requiring precise synchronization and bidirectional motion, delivering dependable performance in medium to high-speed industrial systems.

Megadyne PU welded timing belt TK10 K6

Megadyne PU welded timing belt TK10 K6 is manufactured from thermoplastic polyurethane reinforced with steel or Kevlar cords to deliver high mechanical strength and durability. It features a precise tooth profile with a 10 millimeter pitch and a special K6 design, ensuring uniform power transmission under heavy-duty operating conditions. The operating temperature range is -20 to +80 degrees Celsius, offering resistance to wear, moisture, and oil. Belt widths are available from 20 to 100 millimeters and can be thermally welded into endless loops.

Due to its high tensile strength and dimensional accuracy, this belt is an excellent choice for packaging machines, production lines, and industrial power transmission systems. The precise tooth geometry provides uniform load distribution and reduces vibration at higher speeds. The polyurethane compound with its low friction coefficient minimizes energy losses and increases system efficiency. Additionally, customization in belt length and width provides greater flexibility for specialized industrial applications.

PU treadmill belt for gym

The PU treadmill belt for gym use is manufactured from high-quality polyurethane material, offering excellent resistance to abrasion, tension, and heat. Thanks to its high flexibility and smooth surface, this belt ensures a quiet and smooth motion during running or walking on the treadmill. Its multi-layer structure includes a tension-resistant core and a non-slip surface coating that enhances user safety by preventing foot slippage. Additionally, the belt’s resistance to oils and sweat increases its durability and reduces the frequency of replacements.

The structural features of the PU treadmill belt include uniform thickness, lightweight design, and the ability to withstand repeated mechanical pressures, making it ideal for continuous use in gym environments. These belts also resist environmental temperature changes, ensuring long-lasting stable performance. The specialized design of the PU belt reduces friction between the belt and treadmill motor, optimizing energy consumption, which leads to improved efficiency and lower maintenance costs.

EM10/2 - 0+T6 PVC AS 5.0 Optibelt conveyor belt

The EM10/2 - 0+T6 PVC AS 5.0 Optibelt conveyor belt is made of polyvinyl chloride with a thickness of 5 mm and heat resistance up to 90°C. Its standard width is 60 mm and it can carry loads up to 200 kg per meter. The internal EP fabric layer has a reinforced two-layer structure, providing tensile strength of 10 MPa and high mechanical durability. This belt is designed for transporting dry and petroleum materials, offering significant chemical resistance against oil, grease, and hydrocarbons. The wear-resistant PVC surface and high flexibility increase the operational lifespan of the belt.

The belt has a smooth surface with controlled friction, optimized for operation between -20°C and +80°C. Its specific weight is 1.4 kg per square meter, with an estimated operational lifespan of 5 years. Tensile strength is 2000 N per 50 mm, with elongation under full load below 2%. The two-layer structure with PVC coating ensures uniform material transfer and easy installation. Crack resistance and quiet operation are key features of this industrial product.

EX10/2 - 0+T32 PVC AS Optibelt conveyor belt

The EX10/2 - 0+T32 PVC AS Optibelt conveyor belt is made of polyvinyl chloride with a thickness of 4 mm and heat resistance up to 90°C. Its standard width is 320 mm and it can carry loads up to 550 kg per meter. The internal EP fabric layer has a reinforced two-layer structure, providing tensile strength of 10 MPa and high mechanical durability. This belt is designed for transporting dry and semi-liquid materials, offering adequate chemical resistance against oil and grease. The wear-resistant PVC surface and high flexibility increase operational lifespan and ensure quiet operation.

The belt has a smooth surface with controlled friction, optimized for operation between -20°C and +80°C. Its specific weight is 1.45 kg per square meter, with an estimated operational lifespan of 5 years. Tensile strength is 5000 N per 50 mm, with elongation under full load below 2%. The two-layer structure with PVC coating ensures uniform material transfer and easy installation. Crack resistance and corner flexibility are key features of this industrial belt.

Megadyne PU welded timing belt ATK10 K13

Megadyne PU welded timing belt ATK10 K13 is made of thermoplastic polyurethane reinforced with steel or Kevlar cords, ensuring high tensile strength and long-lasting durability. The belt features a tooth profile with a 10 to 13 millimeter pitch, designed for power transmission in heavier-duty systems. Its operating temperature range is -20 to +80 degrees Celsius, offering strong resistance against wear, oil, and moisture. Standard belt widths are produced between 25 and 100 millimeters, with thermal welding capability for endless loop configurations.

Due to its precise tooth design and broad contact surface, this belt is suitable for transmitting high torques in industrial packaging machinery, production lines, and robotic equipment. Its excellent dimensional accuracy minimizes vibration and increases the service life of engaged components. The combination of high-performance polyurethane and reinforced cords ensures stable operation at high speeds and under heavy loads. Customization in both belt length and width enhances its application flexibility.

Megadyne welded timing belt HTD 8M

Megadyne welded timing belt HTD 8M is manufactured from reinforced polyurethane with helical steel cords and designed for power transmission under medium to heavy loads. The belt features an 8 millimeter pitch and a curvilinear tooth profile, ensuring uniform load distribution and reducing stress concentration during operation. High tensile strength of the embedded cords prevents elongation and guarantees positioning accuracy in motion control systems. Its operating temperature range from minus 20 to plus 100 degrees Celsius allows reliable use in diverse industrial environments.

The surface of the Megadyne welded timing belt HTD 8M is resistant to abrasion and oil, making it suitable for medium to high speed production lines. Endless welding capability enables easy installation without mechanical joints. Transmission efficiency above 97 percent and low noise operation improve productivity and extend the service life of mechanical components. Designed according to DIN ISO 13050 standards, this belt is fully compatible with standardized HTD pulleys.

EX10/2-0+T32 PVC AS Optibelt conveyor belt

The EX10/2-0+T32 PVC AS Optibelt conveyor belt is made of polyvinyl chloride with a thickness of 4 mm and heat resistance up to 90°C. Its standard width is 320 mm and it can carry loads up to 550 kg per meter. The internal EP fabric layer has a reinforced two-layer structure, providing tensile strength of 10 MPa and high mechanical durability. This belt is suitable for transporting dry and semi-liquid materials and offers excellent chemical resistance against oil and grease. The wear-resistant PVC surface and high flexibility increase operational lifespan and ensure quiet performance.

The belt has a smooth surface with controlled friction, optimized for operation between -20°C and +80°C. Its specific weight is 1.45 kg per square meter, with an estimated operational lifespan of 5 years. Tensile strength is 5000 N per 50 mm, with elongation under full load below 2%. The two-layer structure with PVC coating ensures uniform material transfer and easy installation. Crack resistance and corner flexibility are key features of this industrial belt.

Megadyne polyurethane timing belt model T2.5 1185

The Megadyne polyurethane timing belt model T2.5 1185 is made from thermoplastic polyurethane with high mechanical strength and minimal elongation. The tooth pitch is 2.5 mm, and the total number of teeth over its 1185 mm length is 474. The overall belt thickness is 1.3 mm, and the width varies between 6 and 25 mm depending on the application. The internal reinforcement consists of stainless steel cords, ensuring dimensional stability and precise torque transmission. This belt is suitable for precision motion systems, industrial printers, CNC machines, and automation equipment.

The Megadyne T2.5 1185 timing belt operates reliably within a temperature range of -25°C to +80°C. The polyurethane surface has a hardness of 92 Shore A, offering excellent resistance to abrasion, oils, and mild chemicals. Its low noise level and transmission efficiency above 98% are key advantages. Designed for continuous operation at high speeds, this belt provides exceptional synchronization accuracy, making it ideal for positioning and timing control applications.

Megadyne PU welded timing belt TL10

Megadyne PU welded timing belt TL10 is made of thermoplastic polyurethane reinforced with steel or Kevlar cords, ensuring high tensile strength and superior wear resistance. The belt features a 10 millimeter pitch tooth profile, designed for power transmission in medium-duty industrial machines and precision production lines. Its operating temperature range is -20 to +80 degrees Celsius, offering excellent resistance to oil, moisture, and abrasion. Standard widths range from 20 to 100 millimeters, and thermal welding allows the production of endless loop configurations.

Due to its precisely engineered tooth design, this belt provides uniform torque transmission at high speeds under medium to heavy load conditions. Its dimensional accuracy reduces vibration and extends the service life of engaged pulleys. The polyurethane compound with its low friction coefficient minimizes energy losses and improves overall system efficiency. Furthermore, customization in both belt length and width offers greater flexibility for specialized industrial applications.

OPTIBELT coated trapezoidal belt

The OPTIBELT coated trapezoidal power transmission belt is a high-quality product in the power transmission industry, engineered for stable and reliable performance under various working conditions. These belts feature a trapezoidal cross-section that enhances grip on pulleys and minimizes slippage during power transfer. The protective coating—typically made from reinforced rubber or wear-resistant materials—significantly extends service life and improves resistance to environmental factors such as dust, humidity, and heat.

Manufactured using advanced compounds such as natural rubber reinforced with polyester or aramid cords, OPTIBELT belts offer high tensile strength and dimensional stability under heavy-duty conditions. These belts are available in a range of sizes and profiles to suit industrial machinery, transmission lines, compressors, and precision mechanical systems. Quiet operation, smooth power delivery, and compatibility with high-speed applications make this product an ideal choice for demanding professional environments.

EM 10/2 - T18+07 PVC 3.2 Optibelt conveyor belt

The EM 10/2 - T18+07 PVC 3.2 Optibelt conveyor belt is made of polyvinyl chloride with a thickness of 3.2 mm and heat resistance up to 80°C. Its standard width is 180 mm, capable of carrying loads up to 300 kg per meter. The internal EP fabric layer has a reinforced two-layer structure, providing tensile strength of 10 MPa and high mechanical durability. This belt is designed for transporting materials with moderate chemical resistance, such as oil and light petroleum products. The wear-resistant PVC surface and high flexibility increase belt lifespan and ensure quiet operation.

The belt has controlled friction and is optimized for operation between -15°C and +70°C. Its specific weight is 1.3 kg per square meter, with an estimated operational lifespan of 4 years. Tensile resistance is 2500 N per 50 mm, and elongation under full load is below 2.5%. The two-layer structure with PVC coating guarantees uniform material transfer and easy installation. Crack resistance and flexibility at corners are key features of this industrial belt.

OPTIBELT V-belt

The OPTIBELT V-belt is made from a polyurethane composite reinforced with high-tensile fibers, offering a tensile strength of up to 1500 Newtons per millimeter of width. Its thickness typically ranges between 8 to 12 millimeters, available in types Z, A, B, and C, with widths varying from 10 to 38 millimeters. These belts feature precisely engineered teeth that enable optimal mechanical power transmission and reduce slippage in power transmission systems. Additionally, the belt surface is coated with a wear-resistant layer capable of withstanding temperatures up to 80 degrees Celsius.

The OPTIBELT V-belt tension system supports rotational speeds up to 9000 RPM, ensuring stable operation with minimal noise generation. Its resistance to oils and chemicals extends belt lifespan in harsh environmental conditions. These belts are widely used in automotive, agricultural, and heavy machinery industries. International standards such as DIN and ISO are strictly followed in their design and manufacturing, guaranteeing quality and durability.

polyurethane conveyor belt model EM8 - 00+S7

The polyurethane conveyor belt model EM8 - 00+S7 is made of a single layer of polyester fabric with a tensile strength of 8 N/mm. Its top surface features a soft polyurethane coating with a thickness of 0.7 mm, providing high grip for precise transport of light and delicate products. The total belt thickness is approximately 2.1 mm, with a surface weight of around 1.9 kg/m². The friction coefficient is 0.65 in dry and 0.5 in wet conditions. This belt is ideal for packaging lines, carton conveying, and food or pharmaceutical applications.

The EM8 - 00+S7 polyurethane belt operates reliably within a temperature range of -10°C to +80°C. The minimum pulley diameter for proper installation is 30 mm. Its bottom surface is engineered with low friction to ensure smooth and silent operation at higher speeds. Tear resistance according to DIN 22102 is approximately 200 N/mm. This model is FDA-compliant for direct food contact and offers excellent resistance to moisture and oils, making it ideal for hygienic conveying environments.

Megadyne PU welded timing belt T20

Megadyne PU welded timing belt T20 is made from high strength thermoplastic polyurethane and engineered for heavy torque transmission in industrial machinery. The belt features a 20 millimeter pitch with reinforced teeth, reducing slippage and enhancing positioning accuracy in power transmission systems. Embedded helical steel cords provide stable tensile strength and resistance to deformation. Its operating temperature range from minus 30 to plus 80 degrees Celsius allows reliable use in harsh and diverse industrial environments.

The outer surface of the Megadyne PU welded timing belt T20 is resistant to abrasion, oils, and chemicals, making it suitable for high speed production lines. Endless welding capability enables fast installation without mechanical fasteners. Transmission efficiency above 98 percent and low noise operation improve productivity and extend equipment lifespan. Designed according to DIN ISO 5296 standards, this belt ensures full compatibility with standardized timing pulleys and precise system performance.

Megadyne polyurethane timing belt model AT10 370

The Megadyne polyurethane timing belt model AT10 370 is made of thermoplastic polyurethane with a hardness of 92 Shore A, featuring 40-degree angled teeth with a 10 mm pitch. The total belt length is 370 mm, with 37 teeth providing precise power transmission and synchronous motion. The overall belt thickness is 5.5 mm, and the width typically ranges from 15 to 30 mm. Internal reinforcement cords are made of stainless steel or fiberglass, ensuring high tensile strength and dimensional stability. This belt is suitable for power transmission in industrial machinery, automation systems, and CNC equipment.

The Megadyne AT10 370 timing belt operates reliably within a temperature range of -25°C to +80°C. Its polyurethane surface is designed to resist abrasion, oils, and mild chemicals. Power transmission efficiency exceeds 97%, with very low operational noise. The belt is engineered for systems requiring precise synchronization and smooth motion, delivering dependable performance in medium to high-speed industrial applications.

Optibelt trapezoidal power transmission belt

The Optibelt trapezoidal power transmission belt, designed with precision and made from high-quality raw materials, ensures efficient and durable power transmission in various industrial machinery. These belts feature a trapezoidal cross-section that increases friction and improves grip on pulleys, preventing slippage during operation. The reinforced structure includes tension-resistant cords that provide dimensional stability and resistance to high tensile forces, significantly extending the product’s service life.

Thanks to its ability to withstand heavy loads and maintain stable performance at high speeds, the Optibelt belt is an ideal choice for diverse industrial applications such as power transmission systems, compressors, and agricultural machinery. Additionally, its excellent resistance to heat, oil, and varying environmental conditions enables reliable operation under demanding working environments. The design facilitates power transfer with minimal noise and vibration, enhancing overall system efficiency.

Megadyne polyurethane timing belt model T2.5 120

The Megadyne polyurethane timing belt model T2.5 120 is made from thermoplastic polyurethane with a hardness of 92 Shore A and a 2.5 mm tooth pitch. The total belt length is 120 mm, containing 48 precision-molded teeth that ensure accurate power transmission. The overall thickness is 1.3 mm, and the width typically ranges between 6 and 10 mm. Internal reinforcement with stainless steel cords provides high tensile strength and long-term dimensional stability. This belt is ideal for small motion mechanisms, automation devices, robotics, and precision instruments.

The Megadyne T2.5 120 timing belt performs reliably within a temperature range of -25°C to +80°C. Its polyurethane surface resists wear, oils, and mild chemicals. Power transmission efficiency exceeds 98%, with minimal operational noise. The belt is designed for systems requiring precise synchronization and smooth rotation. Its high pitch accuracy and resistance to deformation make it highly dependable for positioning control and miniature drive applications.

polyurethane conveyor belt EM6/2 - 00+03

The polyurethane conveyor belt EM6/2 - 00+03 is composed of two layers of balanced-weave polyester fabric with a transparent polyurethane coating. The total belt thickness is approximately 1.6 mm, and the specific weight is about 1.3 kg per square meter. The allowable tensile force is 6 N per millimeter of belt width, providing excellent resistance to tearing and abrasion. The surface friction coefficient is 0.3 in dry contact and 0.25 in wet conditions. Its working temperature range is between -10 and +80 degrees Celsius, and it offers good resistance to oils and mild chemicals.

The top surface of the EM6/2 - 00+03 belt is smooth and non-adhesive, ensuring stable product transfer. The minimum pulley diameter for this belt is around 30 mm, and its antistatic properties comply with ISO 21178 standards. Due to its high flexibility and dimensional stability, it is suitable for food processing, packaging, and pharmaceutical applications. Its high wear resistance extends operational lifespan and reduces maintenance frequency.

EM18/3 - 0+20 PVC petroleum AS 5.0 Optibelt conveyor belt

The EM18/3 - 0+20 PVC petroleum AS 5.0 Optibelt conveyor belt is made of polyvinyl chloride with a heat resistance of 90°C and can carry loads up to 500 kg per meter. Its total thickness is 5 mm with a standard width of 200 mm, offering high flexibility and superior abrasion resistance. The internal EP fabric layer has a reinforced three-layer structure, ensuring mechanical durability and tensile strength of 18 MPa. This belt is designed for transporting petroleum and its derivatives, providing high chemical resistance against oils and grease.

The belt has a smooth surface with controlled friction, optimized for operation between -20°C and +80°C. Its specific weight is 1.4 kg per square meter, and standard operational lifespan is estimated at 5 years. Tensile resistance is 4500 N per 50 mm, with elongation under full load below 2%. The three-layer structure and PVC coating guarantee quiet operation and uniform material transfer. Easy installation and crack resistance are key features of this industrial product.

Megadyne PU welded timing belt AT5

Megadyne PU welded timing belt AT5 is produced from high density thermoplastic polyurethane and engineered for accurate torque transmission in industrial systems. The belt features a 5 millimeter pitch with reinforced trapezoidal teeth, improving load capacity and minimizing slippage during operation. Strong embedded steel cords provide stable tensile strength and resistance to deformation under continuous stress. Its operating temperature range from minus 25 to plus 80 degrees Celsius supports use in diverse manufacturing and laboratory environments.

he outer surface of the Megadyne PU welded timing belt AT5 is resistant to abrasion, oils, and chemicals, ensuring long service life under continuous duty. Endless welding capability allows easy installation and maintenance without mechanical fasteners. Transmission efficiency above 97 percent and low noise operation enhance productivity in production lines. Precision engineering according to DIN ISO 5296 guarantees full compatibility with standardized timing pulleys.

Megadyne polyurethane timing belt model T5 200

The Megadyne polyurethane timing belt model T5 200 is made from thermoplastic polyurethane with a hardness of 92 Shore A, featuring 40-degree angled teeth with a 5 mm pitch. The total belt length is 200 mm, containing 40 precision teeth that ensure accurate power transmission and synchronous motion. The overall thickness is 3.5 mm, and the width typically ranges from 6 to 15 mm. Internal reinforcement cords are made of stainless steel or fiberglass to provide high tensile strength and long-term dimensional stability. This belt is suitable for small machinery, automation equipment, and precision robotics.

The Megadyne T5 200 timing belt performs reliably within a temperature range of -25°C to +80°C. Its polyurethane surface is resistant to abrasion, oils, and mild chemicals. Power transmission efficiency exceeds 97%, with very low operational noise. The belt is designed for systems requiring precise synchronization and smooth motion, delivering dependable performance in medium-speed industrial applications.

OPTIBELT industrial belts

The OPTIBELT industrial belt is manufactured using specialized rubber compounds and polyurethane materials, offering thermal resistance up to 90°C and mechanical load capacity up to 2500 Newtons. These belts feature a toothed structure with a tooth depth of 2.5 millimeters and widths ranging from 10 to 60 millimeters. The belt’s tensile strength is precisely reinforced with polyester fibers, providing tensile resistance between 2000 and 4000 Newtons per centimeter, which optimizes power transmission and reduces slippage.

The internal reinforcement system of OPTIBELT belts consists of Aramid fibers or stainless steel, ensuring high mechanical strength and extended service life. These belts exhibit excellent abrasion resistance against industrial oils and ultraviolet radiation, delivering stable and precise performance in heavy-duty applications and harsh industrial environments. Additionally, compliance with ISO 9001 and DIN EN standards guarantees the high quality and durability of OPTIBELT products.

Megadyne polyurethane timing belt model T5 120

The Megadyne polyurethane timing belt model T5 120 is made from thermoplastic polyurethane with a hardness of 92 Shore A, featuring 40-degree angled teeth with a 5 mm pitch. The total belt length is 120 mm, containing 24 precision teeth that ensure accurate power transmission and synchronous motion. The overall thickness is 3.5 mm, and the width typically ranges from 6 to 15 mm. Internal reinforcement cords are made of stainless steel or fiberglass to maintain long-term tensile strength and dimensional stability. This belt is suitable for small machinery, automation equipment, and precision robotics.

The Megadyne T5 120 timing belt operates reliably within a temperature range of -25°C to +80°C. Its polyurethane surface is resistant to abrasion, oils, and mild chemicals. Power transmission efficiency exceeds 97%, with very low operational noise. The belt is designed for systems requiring precise synchronization and smooth motion, delivering dependable performance in medium-speed industrial applications.

OPTIBELT flour mill and silo timing belt

The OPTIBELT timing belt designed for flour mills and silos is manufactured with a durable structure to ensure stable performance. Made from high-quality polyurethane materials, these belts offer excellent resistance to wear, heat, and oils, enabling operation under harsh environmental conditions. The core is reinforced with aramid or steel fibers, guaranteeing high tensile strength and long-term stability, which reduces wear and tear over time. The tooth design is engineered to provide precise power transmission with minimal slippage.

Due to their high durability and extended lifespan, these belts are ideal for power transmission systems in flour mills and dry material storage silos. OPTIBELT’s optimized belt design minimizes maintenance requirements and ensures uninterrupted operation, enhancing production line efficiency. Additionally, these belts can be customized in length and are compatible with various pulley types, providing greater flexibility and improved performance in industrial systems.

Polyurethane Conveyor Belt EM8/2 - 00+03

The polyurethane conveyor belt model EM8/2 - 00+03 consists of two layers of polyester fabric with a tensile strength of 8 N/mm. Its top cover is made of transparent polyurethane with a 0.3 mm thickness, providing excellent resistance to abrasion and oils. The total belt thickness is approximately 2.3 mm, with a surface weight of around 2.1 kg/m². The surface friction coefficient measures 0.6 in dry and 0.45 in wet conditions. This belt is ideal for precise conveying in packaging, pharmaceutical, and food processing industries.

The operating temperature range of the polyurethane conveyor belt EM8/2 - 00+03 is from -10°C to +80°C. The minimum pulley diameter is 30 mm, allowing use with compact drive systems. The bottom layer features low friction for smooth and silent operation. Tear resistance according to DIN 22102 is approximately 200 N/mm. This model is manufactured in compliance with FDA requirements for direct food contact and maintains stability against moisture and frequent cleaning cycles.

polyurethane conveyor belt EM6/2 - 00+02

The polyurethane conveyor belt EM6/2 - 00+02 is constructed from two layers of high-density polyester fabric coated with transparent polyurethane. The total thickness is approximately 1.4 mm, and the specific weight is around 1.25 kg per square meter. The permissible tensile strength is 6 N per millimeter of belt width, providing excellent mechanical stability. The top surface is plain, with a friction coefficient of 0.3 in dry and 0.28 in wet conditions. The working temperature range is between -10 and +80 degrees Celsius, and it offers good resistance to light oils and diluted chemicals.

The EM6/2 - 00+02 belt features a smooth, flexible top surface that ensures consistent product movement on production lines. The minimum pulley diameter is approximately 25 mm. Its antistatic property is certified according to ISO 21178. This belt is ideal for food, pharmaceutical, and packaging industries that require hygienic and non-stick surfaces. Long service life and easy maintenance are among its key advantages.

PVC conveyor belt model EM8/2 - 00+05

The PVC conveyor belt model EM8/2 - 00+05 consists of two layers of polyester fabric with a tensile strength of 8 N/mm. Its top surface is made of smooth PVC with a 0.5 mm thickness, providing excellent resistance to abrasion, moisture, and contamination. The total belt thickness is approximately 2.5 mm, with a surface weight of around 2.9 kg/m². The surface friction coefficient is 0.55 in dry and 0.4 in wet conditions. This belt is suitable for conveying light to medium-weight products in dry food, packaging, and assembly industries.

The EM8/2 - 00+05 PVC belt performs reliably in a temperature range from -10°C to +80°C. The minimum pulley diameter for efficient installation is 30 mm. Its bottom layer is designed with low friction to ensure smooth, quiet, and stable operation. Tear resistance according to DIN 22102 is approximately 200 N/mm. This model is resistant to moisture, light oils, and industrial detergents, making it ideal for continuous conveying systems operating at medium speeds.

Megadyne PU welded timing belt T5

Megadyne PU welded timing belt T5 is manufactured from high quality thermoplastic polyurethane and engineered for precise power transmission in light to medium duty applications. The belt features a 5 millimeter pitch with standardized tooth profile ensuring full compatibility with conventional timing pulleys. Embedded helical steel cords reinforce tensile strength and minimize elongation under load. Its operating temperature range from minus 20 to plus 80 degrees Celsius supports use in a wide range of industrial environments.

The surface of the Megadyne PU welded timing belt T5 is wear resistant and suitable for precision automation, medical devices, and packaging machinery. Endless welding capability allows easy installation without mechanical joints. High transmission efficiency above 96 percent and low noise operation improve productivity and extend equipment lifespan. Designed in compliance with DIN ISO 5296 standards, this belt is a reliable choice for applications requiring superior accuracy.

PVC conveyor belt model EM10/2 - 00+07

The PVC conveyor belt model EM10/2 - 00+07 consists of two layers of polyester fabric with a tensile strength of 10 N/mm. Its top surface is made of a green PVC coating with a thickness of 0.7 mm, offering excellent resistance to abrasion, moisture, and grease. The total belt thickness is approximately 2.8 mm, with a surface weight of around 3.2 kg/m². The friction coefficient is 0.6 in dry and 0.45 in wet conditions. This belt is suitable for conveying packaged goods, industrial parts, and medium-weight products on production lines.

The EM10/2 - 00+07 PVC belt operates reliably within a temperature range of -10°C to +80°C. The minimum pulley diameter for efficient installation is 40 mm. Its bottom layer features low friction for smooth, uniform, and silent movement. Tear resistance according to DIN 22102 is approximately 220 N/mm. This model is resistant to light oils, humidity, and cleaning agents, making it an optimal choice for packaging, assembly, printing, and dry food industries.

Megadyne PU welded timing belt AT20

Megadyne PU welded timing belt AT20 is manufactured from high strength thermoplastic polyurethane and designed for heavy torque transmission. The belt features a 20 millimeter pitch and precise tooth geometry that reduces slippage and enhances positioning accuracy. Longitudinal tension is reinforced with embedded steel cords to minimize deformation under continuous load. Its operating temperature range from minus 30 to plus 80 degrees Celsius allows reliable use in diverse industrial environments.

The outer surface of the Megadyne PU welded timing belt AT20 is abrasion and oil resistant, making it suitable for high speed production lines. This belt supports endless welding, enabling quick installation and replacement without complex tools. Low noise operation and power transmission efficiency above 98 percent extend the service life of mechanical components. With a robust structure and standardized dimensions according to DIN ISO 5296, it is an ideal choice for heavy duty industrial machinery.

9 mm PVC Conveyor Belt with Polyester Backing

The 9 mm PVC Conveyor Belt with Polyester Backing is manufactured from polyvinyl chloride combined with a polyester reinforcement layer, providing very high tensile strength. The 9 millimeter thickness allows the belt to withstand heavy loads up to approximately 2500 newtons per millimeter. The PVC top layer offers anti-slip properties and abrasion resistance, while the polyester backing ensures dimensional stability and high flexibility. This structure makes the belt suitable for material handling in heavy and semi-heavy duty production lines.

The 9 mm PVC conveyor belt with polyester backing operates reliably within a temperature range of minus 15 to plus 90 degrees Celsius and resists moisture and oil. Its multilayer design enables usage on pulleys with a minimum diameter of 120 millimeters without cracking or deformation. Due to its long service life and high strength, this belt is considered a reliable choice for steel industries, mining operations, and heavy packaging material transport.

Optibelt D5M 1000 double-sided timing belt

The Optibelt D5M 1000 double-sided timing belt is made of polyurethane reinforced with steel cord and is endless without joints. The effective length is 1000 mm with a 5 mm tooth pitch. This belt features a D-profile with metric teeth, ensuring precise power transmission with minimal slippage. Standard widths are 16 and 25 mm, with other widths available on request. High tensile strength, long mechanical durability, and excellent dimensional stability are key features of this industrial product.

The D5M 1000 belt offers excellent resistance to wear, oil, and chemicals, with low preload requirements. Steel cord reinforcement ensures low vibration and quiet operation. This belt is ideal for applications requiring precise power transmission and bidirectional synchronization. Open lengths and custom width cutting are available. The PU and steel cord construction reduces wear compared to traditional rubber belts, making it widely used in industrial, automotive, and pharmaceutical applications.

Optibelt 120 HTD 5M timing belt

The Optibelt 120 HTD 5M timing belt has an effective pitch length of 120 mm and an HTD profile with a 5 mm tooth pitch. It is manufactured from durable rubber reinforced with fiberglass cords, ensuring high dimensional stability and precise performance. The HTD profile features a curved design that provides smoother power transmission compared to traditional trapezoidal profiles. Standard widths for this belt are 9, 15, and 25 mm, with customized widths available upon request.

This Optibelt timing belt operates within a temperature range of -30 to +100 °C and offers resistance to oil and abrasion. The HTD design evenly distributes load across the teeth, delivering power transmission efficiency above 98 percent. A key feature of the 120 HTD 5M belt is its ability to reduce noise and vibration in industrial drive systems. It is ideal for precise applications such as packaging machinery, CNC equipment, and automation systems, with longer service life compared to conventional timing belts.

OPTIBELT welding belt for tile industries

The OPTIBELT welding belt designed for tile industries is engineered with specialized materials to withstand the demanding conditions of tile and ceramic production lines. This belt can endure high pressures and harsh environments such as elevated temperatures and exposure to chemicals. Thanks to its welded construction, it allows for quick installation without the need for mechanical joints, reducing maintenance time and downtime. Its excellent flexibility and high resistance to wear and tearing make it well suited for continuous industrial processes.

Manufactured using advanced technologies, the OPTIBELT welding belt offers high dimensional stability and reliable performance across varying speeds. Its design ensures smooth and vibration-free power transmission, contributing to increased efficiency and lowered operational costs in tile production lines. Additionally, its resistance to oil, dust, and heat enhances durability and extends the service life under tough industrial conditions.