| Exporter, Wholesale, Manufacturer | |
| Tehran-West |  |
| +989122003350 | |
- Price :negotiated
Ignition starter solenoid Valeo , Iran
- Price :To negotiate
- order by whatsapp
This solenoid is a rapid-action dual-coil electromagnetic switch. Its design is optimized for the 12V DC system in Peugeot 206 and Samand L90 vehicles. The pull-in coil initial current reaches 35 Amps under full load. The holding current after engagement is approximately 2.5 Amps. The generated axial pull force in the plunger is a minimum of 42 Newtons. This force enables full linear plunger travel of 12 millimeters. Total operation time from signal to contact is under 120 milliseconds. The solenoid mounts directly onto the starter motor casing.
Its structure features two main terminals: 30 constant power and 50 control signal. The electrical resistance of the pull-in coil at 20°C is about 0.25 Ohms. The hold-in coil resistance under the same conditions is near 2 Ohms. The housing is made from cold-rolled steel with anti-corrosion epoxy coating. It operates within a temperature range of -25 to +110 degrees Celsius. Its cyclic life exceeds 90,000 operations per Iranian automotive standards. These specifications are valid for models manufactured after 2006.You can order and buy Ignition starter solenoid Valeo from Iran by contacting us through whatsaap and email.
WEBSITE: Ignition starter solenoid Valeo Iran
Symptoms of Automatic Start Malfunction in Peugeot Products
The automatic start system in Peugeot may malfunction with clear signs. The remote control does not respond to the start command. The car does not start despite an unlocked signal. Flashing lights appear on the dashboard without starting. The vehicles main battery drains unusually and quickly. The engine stalls shortly after the initial start. The car alarm system may activate randomly. In some cases, the start function only works at a very close distance. These issues are often due to faults in the module, antenna, or wiring.
