Sink Iran

sink

The IS-1025 kitchen sink is constructed from 1.1mm thick 304-grade stainless steel. This alloy contains 18% chromium and 10% nickel. This composition ensures structural integrity and corrosion resistance. The sinks external dimensions are 1050 by 500 mm with a height of 240 mm. This model features a single, extra-large and deep basin. Its useful depth is 230 mm with a nominal capacity of 60 liters. The products net weight is 14.3 kilograms. Its focused design is ideal for washing large pans and bulky items. Its flat, sturdy rim suits both top-mount and under-mount installation. Two auxiliary 35mm faucet holes are pre-drilled on the rear ledge.

This model features a coarse brushed, textured surface finish. This textured finish is highly resistant to deep scratches and scuffs. The basin floor slopes toward the central drain at a 4.2-degree angle. The drain outlet is 75mm in diameter for rapid drainage of large water volumes. The sink back is coated with a multi-layer polymer-foam insulation. This insulation reduces water impact noise by up to 90%. Its mounting system includes 10 reinforced steel brackets. This sink can withstand dynamic loads of up to 100 kilograms. Its continuous temperature tolerance reaches 130 degrees Celsius. The IS-1025 sink is designed for restaurants and

sink

The IS-1025 kitchen sink is constructed from 1.1mm thick 304-grade stainless steel. This alloy contains 18% chromium and 10% nickel. This composition ensures structural integrity and corrosion resistance. The sinks external dimensions are 1050 by 500 mm with a height of 240 mm. This model features a single, extra-large and deep basin. Its useful depth is 230 mm with a nominal capacity of 60 liters. The products net weight is 14.3 kilograms. Its focused design is ideal for washing large pans and bulky items. Its flat, sturdy rim suits both top-mount and under-mount installation. Two auxiliary 35mm faucet holes are pre-drilled on the rear ledge.

This model features a coarse brushed, textured surface finish. This textured finish is highly resistant to deep scratches and scuffs. The basin floor slopes toward the central drain at a 4.2-degree angle. The drain outlet is 75mm in diameter for rapid drainage of large water volumes. The sink back is coated with a multi-layer polymer-foam insulation. This insulation reduces water impact noise by up to 90%. Its mounting system includes 10 reinforced steel brackets. This sink can withstand dynamic loads of up to 100 kilograms. Its continuous temperature tolerance reaches 130 degrees Celsius. The IS-1025 sink is designed for restaurants and

sink

The IS-1027 kitchen sink is constructed from 1.0mm thick 304-grade stainless steel. This alloy, with 18% chromium and 10% nickel, offers excellent corrosion resistance. The sinks external dimensions are 1000 by 500 mm with a height of 230 mm. This model features one large main bowl and a smaller secondary bowl. The main bowl depth is 220 mm and the secondary is 180 mm. Its combined capacity is approximately 50 liters. The products net weight is 12.1 kilograms. Its design includes an integrated soap dish ledge on the right rim. Its seamless, flat rim is optimized for undermount installation. A central 35mm diameter faucet hole is provided.

This model features a uniform soft sandblasted surface finish. This modern finish minimizes fingerprints and water spots. Each basin floor slopes toward the central drain at a 4-degree angle. The drain outlet is 70mm in diameter, compatible with garbage disposals. The sink back has a heavy 3mm thick rubber-based coating. This coating provides simultaneous sound and thermal insulation. Its mounting system uses 12 concealed stainless steel brackets. This sink withstands thermal shocks up to 150 degrees Celsius. The IS-1027 sink is designed for modern kitchens and intensive use.

sink

The IS-1026 kitchen sink is made from 0.9mm thick 304-grade stainless steel. This alloy, with 19% chromium and 9% nickel, offers high thermal stability. The sinks external dimensions are 950 by 480 mm with a height of 215 mm. This model features two bowls of equal depth, each measuring 205 mm. Each bowls nominal capacity is 25 liters, totaling 50 liters. The products net weight is 10.8 kilograms. Its symmetrical design facilitates task separation between washing and rinsing. Its rim has a slight rise for easy top-mount counter installation. Two standard faucet holes with 100mm center spacing are provided.

This model features a linear vertical brushed surface finish. This finish gives the sink a modern, elongated appearance. Each basin slopes towards its separate drain at a 3.7-degree angle. The drain outlets are 60mm in diameter, allowing for greywater system connections. The sink backing is made of high-density polyethylene foam. This coating absorbs up to 80% of vibration and operational noise. Its mounting system includes 8 locking-mechanism steel clips. This sink operates safely within a temperature range of -30 to +140°C. The IS-1026 sink creates a perfect balance between performance and aesthetics.

sink

The IS-1028 kitchen sink is manufactured from 0.8mm thick 304-grade stainless steel. This standard alloy contains 18% chromium and 8% nickel. The sinks external dimensions are 1100 by 480 mm with an overall height of 210 mm. This model features two equal-sized bowls, each with a useful depth of 200 mm. Each bowls nominal capacity is 28 liters, totaling 56 liters. The products net weight is 11.7 kilograms. Its design incorporates a small integrated work ledge on the left side. It has an internal rolled edge for added rigidity and leak prevention. Two standard 35mm faucet holes are pre-drilled at the rear.

This model features a uniform hairline brushed surface finish. This finish helps conceal minor scratches and wear marks. Each basin slopes towards its independent drain at a 3.8-degree angle. The drain outlets have a diameter of 65mm for fast drainage. The sink back is coated with a thick polyurethane layer for noise suppression. This coating reduces operational noise by up to 75%. Its mounting system includes 10 steel clips for even weight distribution. The sink performs reliably within an operational range of -20 to +130°C. The IS-1028 sink is ideal for semi-professional and medium-duty domestic use.

sink

The IS-1023 kitchen sink is constructed from 0.75mm thick 304-grade stainless steel. This alloy, with 17% chromium and 7% nickel, provides adequate durability. The sinks external dimensions are 850 by 440 mm with a height of 190 mm. This model features two equal-sized bowls, each with a useful depth of 185 mm. Each bowls nominal capacity is 22 liters, totaling 44 liters. The products net weight is 8.7 kilograms. Its classic symmetrical design allows for balanced space utilization. Its flat, simple rim is designed for top-mount installation. A standard 35mm faucet hole is located at the center rear.

This model features a standard brushed surface finish. This finish provides sufficient resistance against daily wear and abrasion. Each basin slopes towards a shared central drain at a 3.2-degree angle. The drain outlet is 50mm in diameter with a default silicone seal. The sink back has a thin polymer coating to reduce sound resonance. This coating enables noise reduction of up to 60%. Its mounting system includes 5 basic adjustable steel clips. This sink performs acceptably within a temperature range of -10 to +110°C. The IS-1023 sink is a cost-effective and reliable choice for standard kitchens.

sink

The IS-1024 kitchen sink is manufactured from 0.8mm thick 304-grade stainless steel. This standard alloy contains 18% chromium and 8% nickel. The sinks external dimensions are 900 by 460 mm with a height of 200 mm. This model features two bowls of different sizes. The larger bowl depth is 190 mm and the smaller is 170 mm. Its total capacity is approximately 42 liters. The products net weight is 9.5 kilograms. Its practical design includes an integrated foldable drip tray. Its rim has a compressed rubber gasket for silent installation. A central 35mm diameter faucet hole is pre-drilled.

This model features a soft satin brushed surface finish. This finish provides a matte look resistant to fine scratches. Each basin slopes towards its independent drain at a 3.5-degree angle. The drain outlets are 55mm in diameter with stainless steel silent covers. The sink back is covered with a polyethylene foam layer. This layer improves vibration and noise absorption by up to 70%. Its mounting system includes 6 adjustable stainless steel clips. This sink remains stable within an operational range of -20 to +120°C. The IS-1024 sink is suitable for daily household use and small families.

sink

The IS-1029 kitchen sink is made from 0.9mm thick 304-grade stainless steel. This alloy, with 18% chromium and 8% nickel, provides suitable durability. The sinks external dimensions are 1200 by 500 mm with a height of 220 mm. This model features two unequal bowls with depths of 190 and 210 millimeters. Its total capacity is approximately 55 liters. The products net weight is 13.8 kilograms. Its design includes a large side rack for dish placement. Its flat, broad rim is suitable for both top-mount and under-mount installation. A standard 35mm faucet hole is located at the center rear.

This model features a fine-grained satin brushed surface finish. This finish resists scratches and fingerprints effectively. The floor slope of each bowl toward the central drain is 3.5 degrees. The drain outlet diameter is 70mm, designed for high water flow. A thick polymer acoustic coating is applied to the sinks back. This coating improves sound absorption by up to 85%. The mounting system includes 8 adjustable stainless steel clips. This sink withstands continuous temperatures up to 120 degrees Celsius. The IS-1029 sink is suitable for family kitchens and heavy-duty use.

sink

The IS-2026 kitchen sink is constructed from 1mm thick Grade 304 stainless steel. This alloy contains 19% chromium and 9% nickel. It provides exceptional resistance to staining and corrosion. The single-bowl sinks external dimensions are 1000 by 500 millimeters. Its useful working depth is 210 mm with a nominal capacity of 45 liters. The products net weight is 9.8 kilograms. Its modern design features fully rounded internal corners with a 20mm radius. This design significantly simplifies cleaning and maintenance. A standard 35mm diameter faucet hole is pre-cut on the right side.

This model features a uniform satin sandblasted surface finish. This finish offers high resistance to scratches and fingerprint marks. The basin slope towards the drain outlet is precisely calculated at 4%. The drain outlet diameter is 65 mm, complying with European standards. The sink rim is flat and flush for seamless countertop integration. A thick rubber backing pad reduces water and object impact noise by 80%. This sink is optimized for undermount installation using stainless steel clips. It has continuous thermal tolerance for direct contact with boiling water.

sink

The IS-2027 kitchen sink is manufactured from 0.9mm thick 304 stainless steel sheet. Its alloy composition includes 18% chromium and 10% nickel. This ensures high chemical resistance in kitchen environments. The overall product dimensions are 1200 by 550 mm with a side height of 230 mm. The useful depth of each of its two bowls is 220 millimeters. The net weight of the sink is 12.5 kilograms. Its design features one large and one smaller bowl for optimized workflow. The standard faucet hole center spacing is 100 millimeters. Its beveled edge enhances user safety by preventing injuries.

The sinks surface has a durable matte brushed finish. This finish provides high resistance against daily scratches and wear. The drainage system is designed with a 3.5-degree slope toward the central outlet. The main drain hole diameter is 70 millimeters. An auxiliary 35mm hole is pre-drilled for faucet installation. The sound-dampening backing is made of heavy synthetic rubber. This backing improves noise absorption by up to 90%. The product is optimized for top-mount cabinet installation. Its temperature tolerance ranges from -20 to +250 degrees Celsius.

sink

The IS-2012 kitchen sink is constructed from 0.45mm thick 400-series ferritic steel. This magnetic alloy contains 13% chromium and 0.1% carbon. The compact sinks external dimensions are 700 by 350 mm with a height of 155 mm. Its useful basin depth is 145 mm with a nominal capacity of 19 liters. The products net weight is only 4.2 kilograms. Its basic design features a rectangular trough with flat edges. Its rim is very thin, with no reinforcing manufacturing processes. A simple rear hole for a 35mm diameter faucet is punched.

This model features a very plain, industrial brushed finish. This finish offers moderate resistance against early-stage rusting. The basin slope toward the rear outlet is approximately 2.5 degrees. The drain outlet diameter is 50mm for direct trap connection. This sink completely lacks any sound-deadening or thermal insulation. Its installation method relies solely on perimeter adhesive bonding. The product is designed for stable, moderate temperature conditions. The IS-2012 sink is an entirely economical product with minimal features. This model is recommended only for light washing and non-critical uses.

sink

The IS-2025 kitchen sink is made from 1.2mm thick 316-grade stainless steel. This alloy contains 16% chromium, 10% nickel, and 2% molybdenum. The molybdenum addition significantly enhances chloride corrosion resistance. The sinks external dimensions are 900 by 450 millimeters. The useful bowl depth is 200 mm with a nominal capacity of 38 liters. The product weight is 11.2 kilograms. Its design features a main basin and an integrated drip tray on the left side. Its rim is ultra-thin and precise, measuring only 3mm in thickness. This rim is ideal for flush installation with stone countertops.

This model features a high-gloss mirror polish surface finish. This finish prevents stain adherence and bacterial growth. The basin floor has a 3.8-degree slope toward the central drain. The drain outlet diameter is 60mm and includes an odor trap. A dense, heavy rubber undercoating reduces unwanted noise by up to 95%. Its mounting system includes 8 stainless steel clips for complete stability. The sink withstands sudden thermal shocks up to 300 degrees Celsius. It holds the NSF/ANSI 51 certification for food contact safety.

sink

The IS-2024 kitchen sink is crafted from 0.7mm thick 304-grade stainless steel. This alloy contains 18% chromium and 8% nickel for durability. Its overall dimensions are 800 by 450 mm with a height of 180 mm. The useful basin depth is 170 mm, offering a nominal capacity of 32 liters. The products net weight is 6.5 kilograms. Its design includes a main basin and a side ledge for soap. Its wide, flat rim is designed for top-mount cabinet installation. A standard 35mm faucet hole is located in the right-hand corner.

This model features a durable satin brushed surface finish. This finish performs exceptionally well against scratches and wear. The basin slope toward the drain is calculated at 3.2 degrees. The drain outlet diameter is 50mm, compatible with common fittings. The sink back is coated with a thick acoustic polymer layer. This coating improves sound and vibration absorption by up to 70%. Its mounting system utilizes 6 adjustable-height steel clips. The product is tested for daily temperature tolerance up to 120 degrees Celsius. The IS-2024 sink is a cost-effective choice with reliable performance.

sink

The IS-2011 kitchen sink is produced from 0.6mm thick 201-grade stainless steel. This base alloy contains 15% chromium and 4% nickel. This compact models external dimensions are 700 by 350 millimeters. Its useful basin depth is 145 mm with a nominal capacity of 20 liters. The products net weight is 4.5 kilograms. Its simple, functional design provides a shallow rectangular bowl. Its flat, uncomplicated rim is suitable for quick installation. A central rear faucet hole with a 30mm diameter is provided.

This model features a standard brushed surface finish. This finish offers moderate resistance against surface scratches. The basin slope towards the central outlet is approximately 2.8 degrees. The drain outlet diameter is 45mm, compatible with standard plumbing traps. The back typically lacks a dedicated acoustic dampening layer. Its installation generally relies on industrial silicone adhesive. The product is designed for light-duty use and normal water temperatures. Its permissible temperature range is 5 to 80 degrees Celsius. The IS-2011 sink is an entry-level and highly economical option.

sink

The IS-2021 kitchen sink is manufactured from 0.6mm thick 202-grade stainless steel. This economical alloy contains 17% chromium and 5% nickel. The compact sinks external dimensions are 750 by 400 millimeters. Its useful basin depth is 160 mm with a nominal capacity of 27 liters. The products net weight is 5.8 kilograms. Its classic design offers a single, deep bowl. Its simple rim is suitable for quick installation on various kitchen cabinets. A central 35mm diameter faucet hole is pre-cut.

This model features a standard brushed surface finish. This finish provides a uniform look and resists superficial scratches. The basin slope towards the central drain is designed at 3.5 degrees. The drain outlet diameter is 50mm for connection to common plumbing traps. A light protective polymer layer is applied to the sinks back. This layer dampens some operational noise. Its mounting system includes 4 basic steel clips for initial stability. The product is suitable for normal use within 0 to 100 degrees Celsius. The IS-2021 sink is a practical and budget-friendly solution for limited space.