Rock wool

Khazar Boiler KMWB-82 steel hot water boiler

The Khazar Boiler KMWB-82 steel hot water boiler, with a thermal capacity of approximately 820,000 kcal/h, is designed for large buildings, residential complexes, and industrial heating systems. It features a three-pass, reverse-flame combustion chamber, delivering over 90 percent thermal efficiency. The body is constructed from 8–12 mm thick ST37 alloy steel, ensuring durability under high temperature and pressure. The furnace is made of fire-tube steel with a reverse flame design for uniform heat distribution. The boiler operates at a maximum working pressure of 6 bar and a hydrostatic test pressure of 9 bar.

The KMWB-82 model supports gas, diesel, and dual-fuel burners, making it suitable for central heating installations. Its front and rear doors are removable for easy maintenance and inspection. The thermal insulation consists of 50 mm thick compressed rock wool, preventing heat loss and improving efficiency. Overall dimensions are 2300×1300×1500 millimeters, with an approximate weight of 980 kilograms. The high-temperature resistant coating and robust design ensure reliable and long-term operation under continuous load conditions.

Araz Sanat B82s 820000 kcal/h Steel Hot Water Boiler

The Araz Sanat B82s steel hot water boiler, with a thermal capacity of 820,000 kcal/h, is designed for residential, commercial, and industrial central heating systems. This three-pass, reverse-flame design provides over 90 percent thermal efficiency. The boiler body is made of 8–12 mm thick ST37 alloy steel, offering high resistance to heat and pressure. The internal furnace, built from fire-tube steel with a cylindrical full-penetration welded structure, ensures uniform heat transfer and stable performance. The maximum working pressure is 6 bar, and the hydrostatic test pressure reaches 9 bar for operational safety.

The B82s model is compatible with gas, diesel, and dual-fuel burners, making it suitable for central boiler rooms. Thermal insulation consists of 50 mm thick compressed rock wool to minimize heat loss. The front and rear doors are hinged for easy maintenance and inspection access. Overall dimensions are 2250×1250×1450 millimeters, with an approximate weight of 940 kilograms. The high-temperature resistant coating, precision engineering, and robust construction guarantee long service life and reliable operation under continuous load conditions.

Araz Sanat B102s 1,020,000 kcal/h Steel Hot Water Boiler

The Araz Sanat B102s steel hot water boiler, with a heating capacity of 1,020,000 kcal/h, is designed for large residential, commercial, and industrial heating systems. This three-pass, reverse-flame design achieves over 90 percent thermal efficiency. The body is made of 8–14 mm thick ST37 alloy steel, providing excellent mechanical strength under high pressure and temperature. The inner furnace is constructed from fire-tube steel using full-penetration welding for uniform heat transfer. The boiler’s maximum working pressure is 6 bar, and its hydrostatic test pressure reaches 9 bar, ensuring safe and reliable operation.

The B102s model supports gas, diesel, and dual-fuel burners, making it suitable for central boiler rooms. Thermal insulation consists of 50 mm thick compressed rock wool to minimize heat loss. The front and rear doors are hinged for convenient maintenance and inspection. Overall dimensions are 2400×1350×1550 millimeters, with an approximate weight of 1050 kilograms. The high-temperature resistant coating and precision engineering ensure long service life, high efficiency, and stable performance during continuous operation.

Araz Sanat B120s 1,200,000 kcal/h Steel Hot Water Boiler

The Araz Sanat B120s steel hot water boiler, with a heating capacity of 1,200,000 kcal/h, is designed for large residential complexes, hospitals, hotels, and industrial facilities. This three-pass reverse-flame boiler provides more than 90 percent thermal efficiency. The body is made of 8–14 mm thick ST37 alloy steel, ensuring high resistance to heat and pressure. The cylindrical internal furnace, made from fire-tube steel with full-penetration welding, delivers uniform and efficient heat transfer. The maximum working pressure is 6 bar, and the hydrostatic test pressure reaches 9 bar, guaranteeing safe and reliable operation.

The B120s model supports gas, diesel, and dual-fuel burners, making it ideal for central boiler rooms. Thermal insulation consists of 50 mm thick compressed rock wool to reduce heat loss. The front and rear doors are hinged for easy access and maintenance. Overall dimensions are 2550×1400×1600 millimeters, with an approximate weight of 1150 kilograms. The high-temperature resistant coating, precise engineering, and standard fittings ensure long service life, energy efficiency, and stable operation under continuous use.

HEPCO TD25E bulldozer exhaust

The HEPCO TD25E bulldozer exhaust is engineered to efficiently channel engine gases while reducing noise and vibration in heavy-duty work environments. The exhaust body is constructed from heat-resistant alloy steel with an Fe-Cr-Mo composition, capable of withstanding temperatures up to 720°C. The wall thickness ranges from 2.5 to 3 mm, coated with high-temperature corrosion-resistant silicone paint. The total exhaust length is approximately 950 mm, with an outlet diameter of 115 mm. Its multi-stage internal expansion chamber reduces back pressure and improves exhaust flow efficiency.

The TD25E exhaust features a dual-layer construction with 15 mm compressed rock wool insulation that minimizes heat transfer to the outer shell. The connection uses a reinforced 10 mm thick steel flange with a high-temperature graphite gasket. It provides vibration resistance up to 170 Hz and corrosion endurance tested for 1200 hours in salt spray conditions. The total system weight is about 11 kg, designed for direct installation on the engine manifold. This design ensures extended durability, reduced emissions, and stable performance under demanding working conditions.

HEPCO HE100B excavator exhaust

The HEPCO HE100B excavator exhaust is designed to efficiently guide engine gases while reducing noise and vibration under heavy-duty operating conditions. The exhaust body is made from heat-resistant alloy steel with an Fe-Cr-Mo composition, capable of withstanding temperatures up to 710°C. The wall thickness ranges from 2.2 to 2.6 mm, with an external high-temperature silicone coating. The total length is approximately 895 mm, and the outlet diameter is 110 mm. Its multi-stage internal expansion chamber design reduces back pressure and improves exhaust gas flow.

The HEPCO HE100B exhaust features a dual-layer construction with 13 mm compressed rock wool insulation, minimizing heat transfer to the outer shell. The connection uses a reinforced 9 mm thick steel flange and high-temperature graphite gasket. It provides vibration resistance up to 165 Hz and corrosion durability verified through 1100-hour salt spray testing. The total weight is around 10 kg, designed for direct installation on the engine manifold. This structure ensures extended durability, reduced emissions, and optimized engine performance in demanding work environments.

HEPCO HC100 excavator exhaust

The HEPCO HC100 excavator exhaust is engineered to efficiently discharge engine gases while minimizing noise and vibration under heavy-duty operating conditions. The body is made of heat-resistant alloy steel with an Fe-Cr-Mo composition, capable of withstanding temperatures up to 720°C. The wall thickness ranges from 2.2 to 2.6 mm and is coated with high-temperature corrosion-resistant silicone. The total length is approximately 905 mm, with an outlet diameter of 110 mm. Its multi-stage internal expansion chamber design reduces back pressure and optimizes engine exhaust flow.

The HEPCO HC100 exhaust features a dual-layer construction with 13 mm compressed rock wool insulation that minimizes heat transfer to the outer shell. The connection uses a reinforced 9 mm thick steel flange with a high-temperature graphite gasket. It provides vibration resistance up to 165 Hz and corrosion endurance tested for 1150 hours in salt spray conditions. The total system weight is about 10.2 kg, designed for direct installation on the engine manifold. This design ensures long-term durability, reduced emissions, and stable performance in demanding work environments.

HEPCO HC100B excavator exhaust

The HEPCO HC100B excavator exhaust is designed to efficiently discharge engine gases while reducing noise and vibration in heavy-duty working environments. The exhaust body is made from heat-resistant alloy steel with an Fe-Cr-Mo composition, capable of withstanding temperatures up to 720°C. The wall thickness ranges from 2.2 to 2.7 mm and is coated with a high-temperature corrosion-resistant silicone paint. The total length is approximately 900 mm, with an outlet diameter of 112 mm. Its multi-stage internal expansion chamber design reduces back pressure and improves exhaust gas flow efficiency.

The HEPCO HC100B exhaust features a dual-layer construction with 14 mm compressed rock wool insulation that minimizes heat transfer to the outer shell. The connection uses a reinforced 9 mm thick steel flange with a high-temperature graphite gasket. It offers vibration resistance up to 170 Hz and corrosion durability tested through 1200-hour salt spray exposure. The total weight is about 10.5 kg, designed for direct mounting on the engine manifold. This configuration ensures extended lifespan, reduced emissions, and stable operation under harsh working conditions.

HEPCO HL200 excavator exhaust

The HEPCO HL200 excavator exhaust is engineered to discharge combustion gases efficiently and reduce noise under heavy-duty operating conditions. The main body is constructed from heat-resistant alloy steel with an Fe-Cr-Mo composition, capable of withstanding temperatures up to 720°C. The shell thickness ranges from 2.2 to 2.8 mm, coated with a high-temperature silicone-based corrosion-resistant finish. The total length is approximately 910 mm, with an outlet diameter of 112 mm. The multi-stage internal expansion chamber design minimizes back pressure and enhances engine breathing efficiency.

The HEPCO HL200 exhaust features a dual-layer structure with 15 mm compressed rock wool insulation that prevents heat transfer to the outer body. The connection section includes a reinforced 10 mm thick steel flange with a high-temperature graphite gasket for sealing. It provides vibration resistance up to 170 Hz and corrosion endurance verified through 1200-hour salt spray testing. The total exhaust weight is about 10.8 kg, designed for direct installation on the engine manifold. This configuration ensures long service life, reduced emissions, and stable operation under demanding working environments.

HEPCO HG180C grader exhaust

The HEPCO HG180C grader exhaust is engineered to efficiently guide engine gases and minimize operational noise under heavy-duty conditions. The exhaust body is made from heat-resistant alloy steel with an Fe-Cr-Mo composition, capable of withstanding temperatures up to 720°C. The wall thickness ranges from 2.2 to 2.8 mm, coated externally with high-temperature corrosion-resistant silicone paint. The total exhaust length is approximately 910 mm, with an outlet diameter of 110 mm. Its multi-stage internal flow design reduces back pressure, improves gas flow, and enhances combustion efficiency.

The HEPCO HG180C grader exhaust features a dual-layer construction with 15 mm compressed rock wool insulation, minimizing heat transfer to the outer surface. The connection is reinforced with a 10 mm thick steel flange and sealed with a graphite gasket for durability. It provides vibration resistance up to 170 Hz and corrosion endurance tested for 1200 salt spray hours. The total exhaust weight is about 11.2 kg, designed for direct mounting on the engine manifold. This structure ensures extended lifespan, reduced emissions, and stable performance in demanding environments.

Komatsu D85 bulldozer exhaust

The Komatsu D85 bulldozer exhaust is designed to channel engine gases efficiently while reducing noise and vibration in heavy-duty environments. The main body is constructed from heat-resistant alloy steel with an Fe-Cr-Mo composition, capable of withstanding temperatures up to 680°C. The shell thickness ranges from 2 to 2.5 mm, coated with a high-temperature silicone-based paint for corrosion and oxidation resistance. The total exhaust length is approximately 900 mm, with an outlet diameter of 110 mm. Its three-stage internal design minimizes back pressure and enhances combustion efficiency.

The Komatsu D85 bulldozer exhaust features a multi-layer structure with 10 mm compressed rock wool insulation to prevent heat transfer to the outer shell. The connection flange is made of 8 mm thick steel with a graphite sealing gasket. It offers vibration resistance up to 150 Hz and corrosion endurance tested for 900 salt spray hours. The total exhaust weight is around 10.5 kg, designed for direct installation onto the engine manifold. This construction increases durability, reduces noise, and optimizes engine performance under demanding working conditions.