Piston Iran

piston pumps

Axial piston pumps feature a swashplate design for variable displacement. The main housing is constructed from heat-treated C45 alloy steel. These pumps incorporate 7 to 9 cylinders arranged in a circular pattern. Each piston diameter varies between 12 to 25 millimeters. The piston stroke can be adjusted up to 30 millimeters. Maximum continuous operating pressure reaches 350 bar. Input shaft rotation speed ranges from 1000 to 3600 RPM. Volumetric displacement per revolution is selectable from 10 to 150 cubic centimeters. Volumetric efficiency under nominal conditions exceeds 95%.

Pistons are made from hardened steel with a chrome plating coating. The swashplate operates with a tilt angle from 0 to 21 degrees. The control system can be hydraulic or electro-hydraulic. System response time is less than 150 milliseconds. Valve plates are made from special ceramic with 1500 Vickers hardness. These pumps incorporate an internal oil cooling system. Operational oil temperature is maintained between 40°C to 70°C. Generated noise level at rated pressure remains below 75 decibels. These pumps are suitable for fluids with 10 to 160 centistokes viscosity.

piston pump

The piston pump is a high-pressure hydraulic pump used to transfer oil at adjustable flow and pressure in industrial, automotive, and heavy machinery systems. Operating pressure typically ranges from 100 to 350 bar, with flow rates depending on pump size ranging from 10 to 250 liters per minute. The pump body is made of alloy steel or aluminum, offering high resistance to wear and pressure. Pistons are precisely machined and heat-treated for fatigue resistance. Volumetric efficiency exceeds 90 percent, enabling operation under high pressure and continuous conditions.

Structurally, the piston pump consists of a cylinder block, pistons, swash plate or cam ring, drive shaft, and reinforced bearings. Seals and O-rings are made of Viton or NBR for heat and oil resistance. Pump installation can be horizontal or vertical, with motor connection via direct coupling or pulley. Operating temperature ranges from -20 to 120°C, and service life exceeds 10,000 hours under standard conditions. Piston pumps in various sizes are suitable for light and heavy machinery, production lines, and industrial hydraulic systems.

piston pump

The Rexroth piston pump is a high-pressure, variable-displacement hydraulic pump used in industrial hydraulic systems and heavy machinery. Operating pressure typically ranges from 160 to 350 bar, with flow rates adjustable from 10 to 300 liters per minute. The pump body is made of aluminum or hardened steel with wear- and corrosion-resistant coating. Pistons are made of chromium steel or alloy with high hardness to withstand high pressure and continuous wear. Internal lubrication and sealing with resistant gaskets ensure smooth, leak-free operation.

Structurally, the pump includes the main body, piston assembly and rings, pressure control valves, drive shaft, and flow adjustment system. The pump can be mounted directly on a motor or coupled via shaft, with high tolerance to vibration and mechanical shock. Internal pressure and flow control ensure precise and uniform operation. Volumetric efficiency typically exceeds 90%, making it suitable for industrial hydraulics, construction machinery, and heavy-duty vehicles.

piston pump

The piston pump is a high-pressure hydraulic pump designed for oil transfer and power supply in industrial hydraulic systems and heavy machinery. Typical operating pressure ranges from 200 to 350 bar, and flow rate depends on size and speed, ranging from 20 to 200 liters per minute. The pump body is made of alloy steel or aluminum, and pistons and rotor are precision heat-treated for high wear and fatigue resistance. Volumetric efficiency typically exceeds 90%, ensuring fast response and smooth hydraulic operation.

Structurally, the piston pump consists of a cylinder block, piston assemblies, swash plate, drive shaft, and reinforced bearings. Seals are made of Viton or NBR, resistant to heat and oil. Precise contact between pistons and swash plate minimizes internal leakage. The pump can be mounted directly on the motor or gearbox, with operating temperature from -20 to 120°C. It is designed for excavators, loaders, cranes, and heavy industrial systems, optimized for continuous and heavy-duty operation.

Engine components including bushings, pistons, bearings, and complete gaskets

Engine components including bushings, pistons, bearings, and complete gaskets are made of alloy steel and cast aluminum with heat treatment and surface hardening. Piston diameters range from 70 to 150 millimeters with a stroke of 60 to 180 millimeters, designed for operating temperatures up to 250°C and combustion pressures up to 100 bar. Bearings are designed for dynamic loads of 5 to 50 tons and lubricated with 10W-40 engine oil. Gaskets are made of copper or steel with nickel coating to prevent oil and water leakage up to 10 bar.

Bushings and pistons are manufactured with dimensional accuracy of 0.01 millimeters and inspected using non-destructive testing including ultrasonic and dye penetrant methods. Piston surfaces are coated with nickel-phosphorus or graphite to reduce friction and extend service life up to 8,000 hours. Assembly follows ISO 9001 and DIN 17005 standards, ensuring reliable piston and bearing performance under high temperature and pressure conditions.

ring piston

The V10 charge pump rotor ring is a critical component in piston and gear hydraulic pumps, responsible for sealing and minimizing internal leakage. It is made of alloy steel with precise heat treatment, offering high resistance to wear, fatigue, and operating pressures up to 350 bar. Machined dimensions and tolerances ensure uniform contact with the rotor and pump housing, increasing system volumetric efficiency above 92 percent. This ring is specifically designed for V10 charge pumps and is used in heavy machinery, industrial hydraulic systems, and construction equipment.

Structurally, the ring features hardened steel, corrosion-resistant coating, and precision grooves for lubrication of pistons or gears. Installation is press-fit or mounted in the rotor groove and can withstand operating temperatures from -20 to 120°C. This component reduces vibration, hydraulic shock, and internal leakage, extending pump service life to over 10,000 operating hours.

pump piston

Piston pump components include internal parts that enable the operation of hydraulic piston pumps. The set consists of pistons, rotor, bushings, rings, retainers, and high-pressure washers. Pistons are available in various sizes, typically from 6 to 32 mm, compatible with different pump capacities. Materials are usually hardened steel or wear- and corrosion-resistant alloys, ensuring efficiency above 90% and long pump life.

Structurally, the components include a precision-grooved rotor, durable coated pistons, bushings, mounting retainers, and pressure- and temperature-resistant washers. The design allows easy installation and replacement while ensuring leak-free and vibration-free operation. These components are suitable for industrial and automotive pumps with operating pressures from 50 to 350 bar and temperatures from -20 to 100°C. Service life exceeds 100,000 hours and meets international standards.

pistons for engine 200-220-6-7

The pistons for engine 200-220-6-7 are made of high-silicon aluminum alloy Al-Si 12% to ensure wear resistance against the cylinder and operating temperatures up to 350°C. Piston diameters range from 95 to 110 mm and piston stroke length from 100 to 120 mm. The piston surface is anodized and T6 heat-treated, while piston rings are coated with chrome-molybdenum steel to withstand combustion pressures up to 180 bar.

Connecting rods and piston pins are made of hardened steel with a diameter of 25 mm, supporting radial loads up to 50 kN. Internal oil channels with 3 mm diameter ensure uniform lubrication and reduce friction between piston and cylinder. Pressure and thermal testing according to ISO 26429 guarantees a service life exceeding 10,000 hours in heavy-duty industrial and diesel engine conditions.

main pin of the 220 rotary piston rotor

The main pin of the 220 rotary piston rotor is made from alloy steel with a surface hardness of 58-62 HRC, ensuring wear resistance and hydraulic pressure tolerance up to 350 bar. The pin shaft has a diameter of 30 mm, an effective length of 120 mm, and weighs approximately 1.5 kg. Oil grooves are machined with 0.05 mm precision to optimize piston lubrication and reduce friction at speeds ranging from 50 to 2000 rpm.

The pin surface is heat-treated and hard-chrome coated, with mechanical fatigue and pressure testing up to 10,000 cycles. Installation uses grade 10.9 stainless steel pins, with play between rotor and pin less than 0.1 mm. This design ensures a service life exceeding 8 years under heavy industrial and hydraulic conditions and full compatibility with OEM 220 rotary piston components.

95L Isumi piston

The 95L Isumi piston is made from forged aluminum alloy with a surface hardness of 120-140 HB, ensuring resistance to cylinder pressure up to 180 bar and operating temperatures up to 250°C. The piston diameter is 95 mm, height 95 mm, and approximate weight 1.8 kg. Ring grooves are CNC-machined with 1.5 mm spacing to minimize gas and oil leakage and maximize power transfer efficiency.

The piston’s exterior is anodized and reinforced with MoS2 or DLC anti-wear coating to reduce friction with the cylinder wall. A 25 mm diameter steel gudgeon pin with 900 MPa tensile strength connects the piston to the connecting rod. Hydraulic pressure and movement cycle testing up to 1 million cycles ensure a service life exceeding 8 years in harsh industrial and environmental conditions.

Bertolini TML 1220 Ceramic Piston Pump

If you
e looking for a high-pressure pump with stable performance and long-lasting durability, the Bertolini TML 1220 ceramic piston pump, made in Italy, is one of the best options available on the global market. Engineered with precision and built using durable materials such as ceramic pistons and a forged brass head, this pump is designed for industrial, agricultural, and professional car wash applications.

If you need a high-pressure pump with European build quality that can withstand intense pressure and harsh working conditions, the Bertolini TML 1220 ceramic electro-pump from Italy is exactly what you
e looking for. Contact our technical consultants today and get expert advice to help you choose the best model for your specific needs.

Bertolini RA Series Piston Pump with Stainless Steel Head

The Bertolini RA Series Piston Pump with Stainless Steel Head is one of the most powerful and durable solutions for industrial, chemical, and water treatment applications. Designed in Italy and built with 316-grade stainless steel in the pump head, it offers exceptional resistance to corrosion, high pressure, and elevated temperatures.

If you
e looking for a high-pressure industrial piston pump for reverse osmosis systems, heavy-duty car washes, or CIP processes, the RA model from Bertolini is a professional and reliable choice.

Contact our technical team today for expert consultation and pricing on the Bertolini RA piston pump with stainless steel head—and equip your operation with premium performance at the best value.

Bertolini WBL 1410F Ceramic Piston Pump

Request a Quote and Purchase the Bertolini WBL 1410F Ceramic Piston Pump

The Bertolini WBL 1410F ceramic piston pump is one of the most powerful and durable industrial solutions for high-pressure fluid transfer. As part of the WBL series from the renowned Italian brand Bertolini, this model features precision engineering and pure ceramic pistons, ensuring stable and long-lasting performance even under demanding industrial conditions.

The Bertolini WBL 1410F ceramic piston pump is a perfect blend of power, durability, and engineering excellence. If you
e looking for equipment that delivers consistent performance for years to come, now is the time to act.

Bertolini 200 Bar Piston Pump

If you
e looking for a powerful and industrial-grade pressure pump that delivers reliable and consistent performance under tough working conditions, the Bertolini WML 1520 piston pump with 200 bar output pressure is one of the best choices available. This model, designed by the reputable Italian brand Bertolini, is ideal for professional applications such as industrial car washes, production line cleaning, irrigation systems, and heavy-duty operations.

If you
e planning to purchase the Bertolini WML 1520 piston pump with 200 bar output pressure, contact our sales experts today. Stock is limited and demand is high — don miss out!