Installations

Digital Overhead Crane Scale

Purchase and Price List of Digital Overhead Crane Scales from Lifting Abzar

In industrial environments, cold storage facilities, warehouses, and workshops, weighing heavy and suspended loads is a critical need. The HARINGTON digital hanging scale, also known as an “overhead crane scale” or “industrial ceiling scale,” is a precise and portable device designed to measure the weight of loads suspended from a crane, ceiling, or any suitable hanging point.

Unlike models limited to crane installations, HARINGTON scales can be mounted on I-beams, metal frames, or any stable structure. This flexibility makes them an ideal solution for diverse working conditions.

At Lifting Abzar, you can find a range of HARINGTON hanging scales with practical capacities—including 1-ton, 2-ton, 3-ton, and 5-ton models—offered at competitive prices along with expert consultation.

Khazar Boiler KMWB-82 steel hot water boiler

The Khazar Boiler KMWB-82 steel hot water boiler, with a thermal capacity of approximately 820,000 kcal/h, is designed for large buildings, residential complexes, and industrial heating systems. It features a three-pass, reverse-flame combustion chamber, delivering over 90 percent thermal efficiency. The body is constructed from 8–12 mm thick ST37 alloy steel, ensuring durability under high temperature and pressure. The furnace is made of fire-tube steel with a reverse flame design for uniform heat distribution. The boiler operates at a maximum working pressure of 6 bar and a hydrostatic test pressure of 9 bar.

The KMWB-82 model supports gas, diesel, and dual-fuel burners, making it suitable for central heating installations. Its front and rear doors are removable for easy maintenance and inspection. The thermal insulation consists of 50 mm thick compressed rock wool, preventing heat loss and improving efficiency. Overall dimensions are 2300×1300×1500 millimeters, with an approximate weight of 980 kilograms. The high-temperature resistant coating and robust design ensure reliable and long-term operation under continuous load conditions.

Dematizh 800-liter horizontal double-jacketed hot water tank

The Dematizh 800-liter horizontal double-jacketed hot water tank is designed to supply large volumes of domestic hot water for hotels, residential complexes, sports centers, and industrial facilities. It consists of two robust steel shells that enable safe and efficient indirect heat transfer between the heating system and domestic water. The inner surface is coated with anti-corrosion epoxy to prevent rust and scale buildup, ensuring extended service life. With a 800-liter capacity, it meets the high hot water demand of large installations. The unit operates at a working pressure of 6 bar and a maximum temperature of 90°C, providing safe and continuous performance.

The Dematizh horizontal double-jacketed water heater features injected polyurethane insulation that minimizes heat loss and improves system energy efficiency. Its horizontal design allows easy installation in boiler rooms with limited height or space. The durable steel body, precise welding, and anti-rust epoxy coating guarantee long life and low maintenance requirements. Standard inlet and outlet connections make periodic service straightforward. This model is an ideal choice for large residential buildings, hospitals, and industrial facilities with continuous hot water needs.

Ferroli Pegasus D45K130 floor-standing storage boiler

The Ferroli Pegasus D45K130 floor-standing storage boiler, with a heating capacity of 38 kW, is one of Ferroli’s most powerful models, ideal for large homes and villas with high heating and hot water demands. It features a dual heat exchanger system: a primary cast-iron heat exchanger resistant to corrosion and high temperatures, and a secondary stainless steel exchanger for instant domestic hot water production. The boiler achieves approximately 91% thermal efficiency, with a maximum heating circuit temperature of 80°C and a working pressure up to 3 bar. It includes a 130-liter enameled steel hot water tank with high-density insulation for minimal heat loss.

The Pegasus D45K130 is equipped with a fan-assisted burner, electronic flame control, frost protection, anti-pump seizure, and overheating protection systems. It can be connected to room thermostats for intelligent temperature management and operates on 230V single-phase electricity. The domestic hot water production rate is around 20 liters per minute with a 25°C temperature rise, suitable for multiple simultaneous outlets. Featuring a low-noise design, electrostatic powder-coated steel body, and compact form factor, this model ensures both performance and durability. The Ferroli Pegasus D45K130 complies with CE Euro

Demir Sun Classic 140 Double-Sided panel radiator

The Demir Sun Classic 140 Double-Sided panel radiator is a high-performance heating unit engineered by Demir Sun Turkey, designed for large rooms and high heat demand applications. It measures 1400 mm in length and 550 mm in height, made from 1.25 mm cold-rolled steel with a Type 22 configuration featuring double panels and double convectors. The radiator delivers approximately 2390 watts of thermal output under 75/65/20°C conditions and operates safely at a maximum working pressure of 10 bar. Its dual-sided design provides an extended radiant surface, ensuring more uniform heat distribution and enhanced energy efficiency. The exterior is finished with durable RAL9016 electrostatic powder coating, offering excellent resistance to corrosion, humidity, and scratches, while the inner surface is phosphate-treated for long-term anti-rust protection.

The Demir Sun Classic 140 Double-Sided radiator is manufactured using automated laser welding technology for maximum sealing and structural strength. It complies with EN 442 European standards and is compatible with wall-hung boilers, central heating systems, and hydronic installations. The unit weighs around 30 kg and supports dual-side installation, making it ideal for use in open areas, hallways, or large rooms requiring two-way hea

LEO APSM75 Self Priming Peripheral Water Pump

The LEO APSM75 self priming peripheral water pump features a reinforced cast iron housing and is designed for clean water transfer in medium pressure systems. It uses a single phase motor with a nominal power of approximately 0.75 horsepower and offers IP44 protection against dust and moisture. The precision machined brass impeller enhances hydraulic stability and reduces flow losses. This model supports initial suction up to about 8 meters and is suitable for compact water supply setups. A graphite and ceramic mechanical seal maintains efficiency during continuous operation.

The APSM75 operates at a nominal speed of 2900 rpm and delivers significant head in a compact configuration for light duty installations and domestic pressure boosting. Standard threaded inlet and outlet connections enable fast installation and secure linkage to piping systems while minimizing leakage risk. The class F copper winding improves thermal endurance and enhances electrical stability in prolonged operation. This model performs reliably within a temperature range of zero to 60 degrees Celsius and is effective for garden irrigation and pressure enhancement in small residential units.

Fire-Resistant Gypsum Board FR K-Plus

The K-Plus +K FR gypsum panel is an advanced building material designed for walls, ceilings, and internal structures with high fire resistance. Its core is made of high-density gypsum combined with flame-retardant additives, providing thermal resistance at temperatures ranging from 800°C to 1000°C for limited durations. The standard thickness ranges between 12.5 to 15 mm, with panel dimensions typically 120×240 cm, allowing fast and even installation in dry construction drywall systems. Reinforcing fibers and specific additives in the gypsum core enhance flexural and tensile strength while minimizing long-term cracking.

The FR K-Plus +K panel weighs approximately 9–12 kg/m² and can be mounted using screws or specialized adhesives. Its smooth surface is suitable for decorative finishes or paint. The panel meets international fire resistance standards Fire Rating Class A1 or A2 depending on type and is widely used in residential, commercial, educational, and industrial buildings. High mechanical strength, fire resistance, compatibility with installations, and rapid installation make the K-Plus +K FR panel an ideal solution for enhancing structural safety and durability.

5mm stainless steel wire rope

The 5 mm stainless steel 316 wire rope with a 7X19 construction is manufactured from a molybdenum alloyed stainless steel, offering exceptional corrosion resistance. With a tensile strength of 1570 N/mm², it is capable of handling significant tensile loads. Its unit weight is approximately 0.12 to 0.13 kilograms per meter, making precise weight calculations essential in structural design and lifting equipment selection.

The applications of the 5 mm stainless steel 316 wire rope are extensive, covering marine industries, architectural installations, small elevators, and light-duty hoisting systems. The 7X19 construction, with its high number of strands, provides excellent flexibility, allowing smooth operation in pulleys and systems requiring constant bending. This feature ensures not only high mechanical strength but also extended service life under demanding working conditions.

In terms of abrasion resistance, the 5 mm stainless steel 316 rope is slightly less durable than carbon steel in high-friction environments, but the chromium and molybdenum protective layer minimizes wear. Its resistance to rust is outstanding, even in chloride-rich or seawater conditions, ensuring long-term durability. These combined properties make it suitable not only for industrial use but also

10mm stainless steel wire rope

The 10 mm non-magnetic stainless steel wire rope with a common 7X19 construction has an approximate unit weight of 0.50 to 0.52 kilograms per meter. This weight is determined by the high density of stainless steel and the number of strands. Knowing the exact unit weight is essential for designing suspended structures, stainless steel railings, and industrial lifting systems, as it directly affects dead load and load-bearing capacity.

In terms of strength and alloy composition, the 10 mm non-magnetic wire rope is typically made from austenitic stainless steel, such as AISI 304 or 316. It provides excellent resistance to corrosion, humidity, and chemical exposure, making it suitable for marine and industrial environments. Its tensile strength ranges from 1570 to 1770 N/mm², allowing it to handle heavy loads of up to approximately 3 tons safely.

The applications of the 10 mm non-magnetic stainless steel rope are extensive, including marine industries, architectural structures, elevators, hoisting systems, and visible or decorative installations. The 7X19 construction offers high flexibility, enabling continuous bending over pulleys and curved paths. Its abrasion resistance and long service life ensure increased safety and durability in demanding working conditions.

12mm stainless steel wire rope

The 12 mm stainless steel 316 wire rope with a common 7X19 construction offers exceptional corrosion and rust resistance. The presence of molybdenum in the alloy enhances resistance to chlorides and aggressive environments. Its composition includes approximately 16–18% chromium, 10–14% nickel, and 2–3% molybdenum, providing both chemical resistance and high mechanical strength. These properties allow the rope to perform reliably in seawater or humid industrial environments.

The unit weight of the 12 mm stainless steel 316 wire rope is approximately 0.75 to 0.78 kilograms per meter. This weight is calculated based on the number of strands and the density of stainless steel. Accurate unit weight information is critical for designing lifting systems, industrial cranes, and suspended structures. It also directly affects dead load calculations and the proper selection of pulleys, clamps, and support hardware.

Applications of the 12 mm stainless steel 316 rope include marine industries, architectural installations, elevators, light-duty cranes, and industrial hoisting systems. The 7X19 construction provides high flexibility and longer service life compared to simpler rope designs. Its abrasion resistance and durability under harsh working conditions increase safety, reduce

14mm stainless steel wire rope

The 14 mm non-magnetic stainless steel wire rope is typically manufactured with a 7X19 construction and offers excellent corrosion and rust resistance. Its austenitic stainless steel composition allows the rope to perform reliably in marine and humid industrial environments without deformation or surface damage. A natural chromium oxide layer on the surface prevents direct contact with moisture and chlorides, extending the rope’s service life.

The alloy composition of the 14 mm non-magnetic stainless steel rope includes approximately 16–18% chromium, 10–14% nickel, and 2–3% molybdenum. This combination provides high chemical resistance, corrosion protection, and significant mechanical strength. Its tensile strength typically ranges from 1570 to 1770 N/mm², enabling it to safely carry heavy industrial loads.

The unit weight of the 14 mm non-magnetic stainless steel wire rope is approximately 1.0 to 1.05 kilograms per meter. This value depends on strand count, wire diameter, and stainless steel density. Accurate weight information is essential for designing suspended structures, cranes, and industrial lifting systems, ensuring precise dead load calculations.

Applications of the 14 mm non-magnetic stainless steel rope are diverse, including marine industries, archi

Rossi MR Series worm gearbox

The Rossi MR Series worm gearbox, made in Italy, is a highly reliable unit designed for precise and continuous power transmission applications. It combines a hardened steel worm shaft with a tin-bronze gear wheel, ensuring superior mechanical efficiency. The output torque reaches up to approximately 3000 Nm, and the reduction ratio ranges from 5 to 100 depending on the configuration. The housing is made of die-cast aluminum for smaller sizes and G250 grey cast iron for larger units. A permanent synthetic lubrication system using ISO VG 320 oil minimizes friction and increases durability during long-term operation.

The MR Series features reinforced bearings and dual sealing elements to prevent oil leakage and extend operational lifespan. It supports horizontal, vertical, and flange-mounted installations and is compatible with IEC electric motors up to 22 kW. The working efficiency ranges from 86 to 93 percent, with a noise level below 70 dB under nominal load. The operating temperature range is from -25 to +90 degrees Celsius, and the gearbox complies with CE and ISO 9001 standards for industrial safety and manufacturing quality.

BONFIGLIOLI right-angle shaft gearbox

The BONFIGLIOLI right-angle shaft gearbox is an industrial angular transmission unit designed for high torque transfer in compact installations. It features a 90-degree bevel gear and pinion configuration housed in an aluminum or cast-iron casing. The output torque range is from 100 to 14,000 newton-meters, with gear ratios between 5 and 800. The output shaft can be configured parallel or perpendicular to the input axis. Angular contact bearings are grease-lubricated for life, and the dual-lip seals provide effective protection against dust and contaminants. The helical gear profile design minimizes noise and improves mechanical efficiency up to 94 percent.

The BONFIGLIOLI right-angle gearbox employs case-hardened, ground gears with DIN 6 precision, ensuring high stability and extended service life. It supports six different mounting orientations and can be coupled with IEC standard or flange-mounted motors. The operating temperature range is from minus 25 to plus 120 degrees Celsius, maintaining stable efficiency when using ISO VG 220 synthetic oil. This gearbox is widely used in steel production lines, conveyor systems, packaging machinery, and power transmission setups with variable dynamic loads.

Bonfiglioli TA parallel shaft gearbox

The Bonfiglioli TA parallel shaft gearbox is a heavy-duty industrial unit with a multi-stage design optimized for high power transmission in compact installations. It features a parallel shaft configuration with case-hardened helical gears made of 18CrNiMo7-6 alloy steel, ground to DIN 6 accuracy. The output torque range is between 600 and 12,000 newton-meters, with gear ratios from 7 to 400. The housing is constructed from ribbed ductile cast iron for increased strength and thermal dissipation. Mechanical efficiency exceeds 96 percent, and tapered roller bearings operate with oil bath lubrication using ISO VG 220 lubricant.

The Bonfiglioli TA gearbox incorporates a multilayer sealing system to prevent oil leakage under heavy-duty conditions. The operating temperature range is from minus 25 to plus 120 degrees Celsius, remaining stable up to 150 degrees with synthetic oil. It supports both horizontal and vertical mounting and can be coupled with IEC standard or flange-type motors. Its compact design ensures noise levels below 70 decibels and an operational lifetime exceeding 20,000 hours. The TA series is widely applied in conveyors, steel production, cement plants, and heavy power transmission systems.

HAND TAPS 1/8 G

The 1/8 G water pipe hand tap is designed according to the BSPP British Standard Pipe Parallel standard and has a nominal diameter of 1/8 inch, equivalent to 9.728 millimeters. It features a thread pitch of 28 threads per inch TPI with a 55-degree thread angle. The thread type is parallel, intended for connections that require sealing with a washer or O-ring. This tap is typically made from high-speed steel HSS with a surface hardness of 60 to 65 HRC, offering good resistance to wear and heat. The overall length usually ranges from 45 to 65 millimeters, and the square shank is designed for use with a hand tap wrench.

The recommended pilot drill diameter for this tap is approximately 8.8 millimeters to ensure maximum compatibility with the thread profile. The ideal manual threading speed is between 10 to 15 revolutions per minute. This tap is used for creating parallel threads in water, air, or low-pressure fluid pipe fittings. It is commonly applied in pneumatic systems, hydraulics, and residential or industrial installations. High manufacturing quality and precise chip flute geometry ensure accurate threads and long service life.

12mm threaded rod

The M12 threaded rod is manufactured according to DIN 975 and ISO 898 standards, with an approximate weight of 0.89 to 0.92 kilograms per meter, depending on the steel type. Its tensile strength in grade 8.8 steel is around 800 MPa, while the yield strength is approximately 640 MPa. This rod is widely used in industrial and installation connections that require medium to high load capacity and can be applied in steel structures, mechanical equipment, and industrial installations.

The surface coating of the M12 threaded rod can include cold galvanization, hot-dip galvanization, zinc plating, or even powder coating to improve corrosion resistance. In the installation industry, it is used for mounting pipes, securing HVAC equipment, and flanged connections. Additionally, in automotive and machinery manufacturing, it is a standard option due to its suitable strength and weight. The combination of proper weight, high mechanical performance, and versatile surface coatings makes the M12 rod one of the most widely used sizes across various industries.

M8 stainless steel threaded rod

The A2 stainless steel M8 metric screw has a nominal diameter of 8 millimeters and a standard thread pitch of 1.25 millimeters, suitable for fastening medium to heavy industrial components. Its unit weight is approximately 0.050 kilograms per 10 centimeters of length, allowing precise calculation of total assembly weight for mechanical and structural designs. The thread depth is about 0.7 millimeters, and the full-thread design with a 60-degree angle ensures uniform engagement in nuts or tapped holes, preventing stress concentration at connection points. With a surface hardness of 150–180 HV and tensile strength around 500 MPa, the M8 A2 screw provides safe performance under static loads and industrial vibrations.

The A2 M8 stainless steel screw offers excellent corrosion and rust resistance, making it suitable for indoor, semi-humid industrial, and light marine environments. Its chemical composition includes 18–20% chromium and 8–10% nickel, forming a stable passive oxide layer that protects the surface. This protective layer remains effective in humid conditions, exposure to vapor, and mild chemical solutions, extending the service life of assemblies. Smooth and precision-finished threads reduce friction and ensure fast, secure, and reliable assembly for engineers.

M6 A2 stainless steel threaded rod

The A2 stainless steel M6 metric screw has a nominal diameter of 6 millimeters and a standard thread pitch of 1 millimeter. Its thread depth is approximately 0.6 millimeters, providing secure engagement in nuts or tapped holes. The unit weight is around 0.030 kilograms per 10 centimeters of length, allowing engineers to calculate total assembly weight and ensure proper load distribution. The screw’s surface hardness ranges from 150 to 180 HV, and its tensile strength reaches approximately 500 MPa, providing reliable performance under static and dynamic loads in industrial environments. The fully threaded design with a 60-degree thread angle distributes stress uniformly, reducing the risk of localized failure and ensuring long-term mechanical stability.

A2 stainless steel M6 screws offer excellent resistance to corrosion, rust, and environmental degradation, making them suitable for indoor, semi-outdoor, and mildly corrosive industrial applications. The chemical composition includes 18–20% chromium and 8–10% nickel, forming a passive oxide layer on the surface that protects against oxidation. This protective layer remains effective under high humidity, light chemical exposure, and moderate temperature fluctuations, extending service life. The precision-machined surface an

Cast iron welding filler code ER-Ni1

The cast iron welding filler with the code ER-Ni1 is one of the most commonly used filler materials in the cast iron welding process, primarily utilized for repairing cast iron parts. This filler is made of high-purity nickel and, due to its excellent adhesion to the cast iron surface, can withstand thermal and mechanical stresses effectively. ER-Ni1 has an appropriate melting point that helps prevent cracking and maintain weld integrity during cooling. This filler is suitable for various types of cast iron including gray cast iron, ductile cast iron, and white cast iron, and due to its wear resistance and good corrosion resistance, it increases the service life of repaired components.

In terms of application, ER-Ni1 is widely used in industries such as automotive, machinery manufacturing, and industrial installations, especially when welding hard and brittle cast irons is required. International welding standards like AWS A5.14 and ISO 17632 define the technical specifications of this filler, including a chemical composition with a high percentage of nickel, tensile strength, and acceptable mechanical properties. Additionally, ER-Ni1 supports welding with TIG and MMA methods, and due to its ease of use and weld quality, it is considered one of the top choices among profession

Polyethylene Female Adapter 50mm x 1 1-2 inch

Polyethylene Female Adapter 50mm x 1 1/2 inch is one of the most commonly used and durable fittings in polyethylene piping systems. It is designed to connect polypropylene pipes to metal threaded fittings or valves.

The 50mm x 1 1/2 inch polyethylene female adapter features a high-pressure threaded design and is made of copolymer polypropylene, making it suitable for water supply systems, irrigation, and industrial installations.

If you are looking for a reliable, durable, and high-pressure threaded connection for polyethylene and polypropylene piping, the 50mm to 1 1/2 inch polyethylene female adapter is the best choice for you. With high quality and standardized design, this fitting ensures quick installation and reliable performance in various projects.

Contact our experts now to order the durable and practical 50mm x 1 1/2 inch female adapter and ensure the quality and safety of your piping system!

110x4 mm Threaded Male Polyethylene Adaptor

Technical Specifications of 110x4 mm Male Polyethylene Adaptor:

Size: 110 mm diameter with 4 mm thickness

Material: Polypropylene Copolymer PP Copolymer

Pressure Rating: Up to 10 atmospheres 10 bar

Connection Type: High-pressure threaded connection Threaded Male Adaptor

Application: Suitable for connecting polyethylene and polypropylene pipes in urban and industrial water supply systems

This product features a threaded design for easy and quick installation and prevents water leakage at the joints. Using the 110x4 mm male polyethylene adaptor increases durability and strength in piping networks and is an ideal choice for construction projects and industrial installations.

For purchasing the high-quality 110x4 mm threaded male polyethylene adaptor at a reasonable price, contact us now and benefit from free consultation with our experts.

63x40 mm Polyethylene Reducing Coupling

Technical Specifications, Wholesale, and Purchase Price of 63 to 40 mm Polyethylene Reducing Coupling:
The 63x40 mm polyethylene reducing coupling Reducing Coupling 63×40 mm is one of the most commonly used fittings in polyethylene piping systems. It is designed to reduce pipe diameter and connect pipes of different sizes. Manufactured in a 63×40 mm size, this coupling is made from durable polypropylene copolymer PP Copolymer and can withstand pressure up to 10 bar 10 atmospheres.

Thanks to its robust construction and high-pressure threaded connection, the 63 to 40 polyethylene reducing coupling is an ideal choice for water distribution networks, pressurized irrigation systems, and industrial piping installations.

To purchase the 63x40 polyethylene reducing coupling at a competitive price and high quality, contact us today and place your order.

20mm Polyethylene End Cap

The 20mm Ablooleh Polyethylene Threaded End Cap is a key component in high-pressure piping systems, used to seal the end of polyethylene or polypropylene pipelines. This heavy-duty threaded cap, with its precise design and high build quality, is an ideal choice for agricultural irrigation networks, urban water distribution systems, and industrial installations.

To place an online order or purchase the 20mm polyethylene end cap in bulk at the best market price, simply click the button below.

Polyethylene End Cap 40

Polyethylene End Cap 40 mm Treaded End Plug 40 mm
The 40 mm polyethylene end cap is an essential and practical component in polyethylene and polypropylene piping systems, used to securely close the ends of high-pressure pipes. This end cap, sized at 40 mm, is made from durable polypropylene copolymer, ensuring high strength and resistance to pressure up to 10 bar.

The 40 mm heavy-duty threaded end cap is designed for easy installation and removal without the need for complex tools. It is ideal for use in water supply projects, agriculture, industrial applications, and infrastructure installations that require reliable sealing and protection for polyethylene pipes.

If you are looking for a high-quality and durable end cap for 40 mm polyethylene pipes, contact us now to get the best price and expert consultation!

Tork solenoid valve

Tork solenoid valve is one of the most reputable brands producing various types of industrial solenoid valves, widely used in production lines, the food industry, steam lines, and fluid installations. These products, with their high build quality, suitable lifespan, and precise flow control capabilities, are considered an economical and practical choice for engineers and industrial technicians. Using a Tork solenoid valve helps improve the efficiency of control systems and increases the safety of equipment operation. These solenoid valves are available in 24V, 220V, and customized voltages and are offered in Normally Closed and Normally Open models.

Tork solenoid valves are manufactured with brass, stainless steel, and steel materials, making them ideal for water, gas, air, and steam transfer lines. These products come with an IP65 protection rating and can withstand high working pressures and various fluid temperatures. Key advantages of this brand include fast response, precise sealing, optimized energy consumption, easy installation, and quick maintenance.