Drive

Axle gears, clutch plates, drive shafts, and yokes

Axle gears, clutch plates, drive shafts, and yokes are manufactured from chromium-molybdenum alloy steel with tensile strength above 1200 megapascals to withstand heavy torque and dynamic loads. Quenching and tempering heat treatment increases surface hardness to 50–60 Rockwell C, optimizing wear and fatigue resistance. Gear dimensional tolerance is below 0.02 millimeters, and uniform geometry of plates and drive shafts ensures smooth power transmission. Yoke surfaces are protected with phosphate or electroless nickel coating of 25–50 microns thickness to enhance durability in wet and abrasive environments.

Paragraph 2 English:
The weight of each axle component ranges from 2 to 120 kilograms, with assembly using grade 10.9 bolts and hardened bushings. Operating temperature range spans from minus 40 to plus 120 degrees Celsius, and bearings have clearance below 0.005 millimeters. Design is performed with CAD software and finite element stress analysis to ensure service life exceeding 15000 hours. Lubrication is provided by high-temperature, high-pressure industrial grease to maintain power transmission efficiency over time.

PH2*SL6*150 screwdriver bit

The PH2*SL6*150 screwdriver bit is made from chrome-vanadium alloy steel with precise heat treatment to provide high mechanical strength and long-lasting resistance to wear and breakage. The tool has an exact length of 150 millimeters and a shaft diameter of 6.35 millimeters ¼ inch, allowing compatibility with manual, electric, and magnetic drivers. Its dual PH2 and SL6 design enables use with both Phillips and slotted screws and is manufactured according to international DIN and ISO standards to ensure uniform torque transfer and maximum screw fit.

The surface of the screwdriver bit features black phosphate coating or nickel plating, providing high resistance to corrosion and rust while optimizing tool lifespan. Surface hardness is controlled between 58 and 62 HRC, and the precision edges ensure torque transfer without slipping. The 150-millimeter long single-ended design allows easy access to deep screws and optimizes use in industrial, repair, and construction projects, enhancing user efficiency and performance.

magnetic screwdriver bit

The magnetic screwdriver bit is made from chrome-vanadium steel with precise heat treatment to provide high mechanical strength and long-lasting resistance to wear and breakage. Its standard length ranges from 25 to 150 millimeters, with a shaft diameter of 6.35 millimeters ¼ inch, ensuring full compatibility with manual, electric, and cordless drivers. The magnetic tip is designed to securely hold screws, preventing them from falling during work, and is available in flat, Phillips, and cross-head profiles manufactured according to DIN and ISO standards.

The surface of the magnetic screwdriver bit features black phosphate coating or nickel plating, providing high corrosion and rust resistance and optimizing tool lifespan. Surface hardness is controlled between 58 and 62 HRC, and precise edges ensure uniform torque transfer without slipping. The single-ended or double-ended design allows easy access to deep screws and optimizes performance in industrial, repair, and construction projects, enhancing user efficiency.

EXXON Screwdriver Bit

The EXXON screwdriver bit is made from chrome-vanadium alloy steel with advanced heat treatment to ensure high mechanical strength and wear resistance. The tool has an exact length ranging from 50 to 150 millimeters and a standard shaft diameter of 6.35 millimeters ¼ inch, allowing compatibility with manual, electric, and magnetic drivers. The tip is available in various profiles, including flat, Phillips, and cross-head, and is manufactured according to international DIN and ISO standards to ensure maximum compatibility with industrial and household screws.

The surface of the EXXON screwdriver bit features black phosphate coating or nickel plating, providing corrosion resistance and extending the tool’s service life. Its surface hardness is controlled within the 58 to 62 HRC range, and the precision edges allow uniform torque transfer without slipping. The single-ended or double-ended design optimizes usability in repair, industrial, and construction projects, maximizing user efficiency and performance.

cordless drill screwdriver bit

The cordless drill screwdriver bit is made from chrome-vanadium steel with precise heat treatment to provide high tensile strength and long-lasting resistance to wear and breakage. Its standard length ranges from 25 to 100 millimeters, with a shaft diameter of 6.35 millimeters ¼ inch, ensuring full compatibility with cordless drills, electric screwdrivers, and magnetic holders. The bit is produced in flat, Phillips, and cross-head profiles and is designed according to international DIN and ISO standards to provide maximum fit and optimal performance on screws.

The bit surface features black phosphate coating or nickel plating, enhancing corrosion and rust resistance and extending the tool’s service life. Surface hardness is controlled between 58 and 62 HRC, and precise edges ensure uniform torque transfer without slipping. Single-ended or double-ended designs allow easy access to deep screws and optimize use in repair, industrial, and construction projects, maximizing user efficiency and performance.

PH2X100 Screwdriver Bit

The PH2X100 screwdriver bit is made from chrome-vanadium alloy steel with advanced heat treatment to ensure high mechanical strength and long-lasting wear resistance. The tool has an exact length of 100 millimeters and a shaft diameter of 6.35 millimeters ¼ inch, allowing compatibility with manual, electric, and magnetic drivers. The PH2 tip is designed according to ISO 8764-1 standards, and its precise dimensions ensure maximum fit with industrial and household Phillips screws, enabling torque transfer without slipping or damaging the screw.

The surface of this screwdriver bit features black phosphate coating or nickel plating, providing high corrosion and rust resistance and extending the tool’s service life. Surface hardness is controlled between 58 and 62 HRC, and the edge design ensures uniform torque distribution. The 100-millimeter long single-ended design allows easy access to deep or confined screws, optimizing its use for industrial repairs, electronic equipment, and construction projects.

Taiwanese screwdriver bit

The Taiwanese screwdriver bit is made from chrome-vanadium steel with precise heat treatment to provide high mechanical strength and long-lasting resistance to wear and breakage. The tool length ranges from 25 to 150 millimeters, with a shaft diameter of 6.35 millimeters ¼ inch, ensuring full compatibility with manual, electric, and magnetic drivers. This screwdriver bit is available in flat, Phillips, and cross-head profiles and is designed according to international DIN and ISO standards to provide maximum fit and uniform torque transfer on industrial and household screws.

The surface of the Taiwanese screwdriver bit features black phosphate coating or nickel plating, enhancing corrosion and rust resistance and optimizing tool lifespan. Surface hardness is controlled between 58 and 62 HRC, and precise edges allow torque transfer without slipping. The single-ended or double-ended design provides easy access to deep screws and ensures optimal performance in repair, industrial, and construction projects.

RONIX screwdriver bit

The RONIX screwdriver bit is made from chrome-vanadium alloy steel with precise heat treatment to provide high mechanical strength and long-lasting resistance to wear and breakage. The tool length ranges from 50 to 150 millimeters, with a shaft diameter of 6.35 millimeters ¼ inch, ensuring full compatibility with manual, electric, and magnetic drivers. This screwdriver bit is available in flat, Phillips, and cross-head profiles and is designed according to international DIN and ISO standards to provide maximum fit and uniform torque transfer on industrial and household screws.

The surface of the RONIX screwdriver bit features black phosphate coating or nickel plating, enhancing corrosion and rust resistance and optimizing tool lifespan. Surface hardness is controlled between 58 and 62 HRC, and precise edges ensure torque transfer without slipping. The single-ended or double-ended design allows easy access to deep screws and ensures optimal performance in repair, industrial, and construction projects.

Single-Ended Slotted and Phillips Screwdriver Bit 15 cm USA Brand

The single-ended slotted and Phillips screwdriver bit 15 cm USA brand is manufactured from chrome-vanadium steel with precise heat treatment to enhance tensile strength and wear resistance. This tool has an actual length of 150 millimeters and a shaft diameter of 6.35 millimeters ¼ inch, making it compatible with magnetic, electric, and manual drivers. The dual slotted and Phillips design enables use with both flat and cross-head screws and is produced in compliance with international DIN and ISO standards.

The surface of this screwdriver bit is coated with black phosphate and nickel plating, providing corrosion resistance and extending service life in humid environments. Its surface hardness is controlled within the 58 to 62 HRC range, while the precise edges ensure uniform torque transfer without slipping. The single-ended long design with a 15-centimeter length allows easy access to deep or confined spaces, making it ideal for industrial maintenance, electronic equipment, and construction projects.

PH2*100 Screwdriver Bit

The PH2*100 screwdriver bit is made from chrome-vanadium alloy steel with precise heat treatment to provide high mechanical strength and long-lasting resistance to wear and breakage. The tool has an exact length of 100 millimeters and a shaft diameter of 6.35 millimeters ¼ inch, allowing compatibility with manual, electric, and magnetic drivers. The PH2 tip is designed according to ISO 8764-1 standards, and its precise dimensions ensure maximum fit with industrial and household Phillips screws, enabling torque transfer without slipping or damaging the screw.

The surface of the PH2*100 screwdriver bit features black phosphate coating or nickel plating, enhancing corrosion and rust resistance and optimizing tool lifespan. Surface hardness is controlled within the 58 to 62 HRC range, and precise edges ensure uniform torque transfer without slipping. The 100-millimeter long single-ended design allows easy access to deep screws and optimizes use in industrial, repair, and construction projects.

EXXON screwdriver bit

The EXXON screwdriver bit is made from chrome-vanadium alloy steel with advanced heat treatment, ensuring high mechanical strength and long-lasting resistance to wear and breakage. The bit length ranges from 50 to 150 millimeters, with a shaft diameter of 6.35 millimeters ¼ inch, allowing compatibility with manual, electric, and magnetic drivers. This tool is available in flat, Phillips, cross-head, and other international DIN and ISO standard profiles, providing maximum fit and uniform torque transfer for both industrial and household screws.

The surface of the EXXON screwdriver bit features black phosphate coating or nickel plating, enhancing corrosion and rust resistance and optimizing the tool’s service life. Surface hardness is controlled between 58 and 62 HRC, and precise edges ensure torque transfer without slipping. The single-ended or double-ended design allows easy access to deep screws and ensures optimal performance in industrial, repair, and construction projects.

PH2.SL6 screwdriver bit from EXXON tools

The PH2.SL6 screwdriver bit from EXXON tools is made from chrome-vanadium alloy steel with precise heat treatment, providing high mechanical strength and long-lasting resistance to wear and breakage. The tool has an exact length of 100 millimeters and a shaft diameter of 6.35 millimeters ¼ inch, allowing compatibility with manual, electric, and magnetic drivers. Its dual PH2 and SL6 design enables use with both Phillips and slotted screws and is manufactured according to ISO and DIN standards to ensure maximum fit and uniform torque transfer.

The surface of the EXXON screwdriver bit features black phosphate coating or nickel plating, enhancing corrosion and rust resistance and optimizing tool lifespan. Surface hardness is controlled within the 58 to 62 HRC range, and precise edges allow torque transfer without slipping. The single-ended or double-ended design provides easy access to deep screws and maximizes usability in industrial, repair, and construction projects.

PH2PH265 EXXON Screwdriver Bit

The PH2*PH2*65 EXXON screwdriver bit is made from chrome-vanadium alloy steel with precise heat treatment, providing high mechanical strength and long-lasting resistance to wear and breakage. The tool has an exact length of 65 millimeters and a shaft diameter of 6.35 millimeters ¼ inch, allowing compatibility with manual, electric, and magnetic drivers. Its double-ended PH2 design is manufactured according to ISO 8764-1 standards, ensuring maximum fit and uniform torque transfer on industrial and household Phillips screws.

The surface of the EXXON screwdriver bit features black phosphate coating or nickel plating, enhancing corrosion and rust resistance and optimizing tool lifespan. Surface hardness is controlled within the 58 to 62 HRC range, and precise edges allow torque transfer without slipping. The double-ended design provides easy access to deep screws and ensures optimal performance in industrial, repair, and construction projects.

PH2 Screwdriver Bit 5 cm USA Brand

The 5 cm PH2 screwdriver bit USA brand is manufactured from chrome-vanadium alloy steel with precise heat treatment to maximize mechanical strength and wear resistance. This tool has an actual length of 50 millimeters and a standard shaft diameter of 6.35 millimeters ¼ inch, making it compatible with manual, electric, and magnetic drivers. The PH2 Phillips tip is produced according to ISO 8764-1 standards, ensuring full compatibility with commonly used industrial and household screws.

The surface of this screwdriver bit is coated with black phosphate for corrosion resistance, providing protection against rust and extending service life. Its surface hardness is controlled within the range of 58 to 62 HRC, while the precision of the edges ensures uniform torque transfer without slipping. The single-ended design and compact 5-centimeter length make it ideal for easy use in confined spaces and for quick repairs on various equipment.

Double-Ended Phillips Screwdriver Bit 6.5 cm USA brand

The double-ended Phillips screwdriver bit 6.5 cm USA is manufactured from hardened steel alloyed with chrome and vanadium, providing high resistance against wear and breakage. With an exact length of 65 millimeters and a standard shaft diameter of 6.35 millimeters ¼ inch, it is designed to fit magnetic or electric drivers. The Phillips tip angle is produced in accordance with ISO 8764-1 international standards, ensuring maximum compatibility with both industrial and household screws.

The surface coating of the screwdriver bit features nickel plating and black phosphate, which reduces friction and increases service life. Its surface hardness is measured between 58 and 62 HRC, and the precision of the edges guarantees uniform torque transfer without slipping. The double-ended design allows continuous use in repair projects and production lines, while its lightweight construction minimizes user fatigue during extended operation.

Double-Ended Phillips Screwdriver Bit 10 cm Ph2 USA Brand

The double-ended Phillips screwdriver bit 10 cm Ph2 USA brand is made of chrome-vanadium alloy steel with controlled heat treatment to ensure durability and wear resistance. This tool has an exact length of 100 millimeters and a shaft diameter of 6.35 millimeters ¼ inch, making it compatible with both electric and manual drivers. Both ends feature a Phillips size PH2 tip in compliance with ISO 8764-1 standards, providing maximum compatibility with industrial and household screws.

The surface of this screwdriver bit is coated with black phosphate for corrosion resistance, ensuring protection against rust and extending tool life. Its surface hardness is set within the 58 to 62 HRC range, and the precision of the edges allows uniform torque transfer without slipping. The double-ended design not only offers economic efficiency but also enables long-term use in repair projects, production lines, and construction applications.

Single-Ended Slotted Screwdriver Bit 5 cm SL5 and SL6 USA Brand

The single-ended slotted screwdriver bit 5 cm SL5 and SL6 USA brand is manufactured from alloy steel containing chrome and molybdenum, ensuring strength and resistance under high pressure. The exact length of this tool is 50 millimeters with a shaft diameter of 6.35 millimeters ¼ inch, allowing compatibility with electric and magnetic drivers. The flat blade is produced according to DIN 5264 standard and covers two common sizes, SL5 and SL6, making it suitable for different screw types.

The surface of the screwdriver bit is coated with black phosphate for corrosion resistance, preventing rust and wear in heavy-duty applications. Its surface hardness is set between 58 and 60 HRC, while precise edges ensure uniform torque transfer without slipping. The single-ended flat design provides greater torque focus and makes it ideal for industrial repairs, mechanical equipment, and household applications.

dana spicer lift truck drive shaft

Drive shaft and drive shaft with Dana Spicer American brand are produced for all kinds of forklifts and load carrying equipment in different series and with different configurations. One hundred years of experience and innovation is the technical support of Dana Spicer brand gearbox and power transmission equipment, which guarantees the use of this companys production range in the most difficult working conditions. The use of connections and couplings in different shapes according to the design of forklift power transmission components is another feature of Dana Spicer Gardan.
The 5C series of Dana Spicer Gardan is for forklifts, the 6C series is suitable for transport equipment and machinery, including reach stackers, the 7C series is suitable for combine harvesters and grader engines, the 8.5C series is suitable for tractor attachments and the 15C series is designed for loaders. Is produced.

JBR brand drive shaft bearing for Peugeot 405 and Peugeot 206

Sale and Purchase Price of Peugeot 405 and Peugeot 206 Drive Shaft Bearings JBR Brand at Ansari Store

If you
e looking to buy high-quality drive shaft bearings for your Peugeot 405 or Peugeot 206, the JBR brand is one of the most reliable options in the automotive spare parts market. With precise engineering and durable materials, this bearing ensures smooth and silent performance in your vehicle’s power transmission system, while preventing damage to the drive shaft and front suspension.

To inquire about prices and purchase various types of drive shaft bearings for Peugeot 405 and Peugeot 206 from trusted brands like JBR, contact the experts at Ansari Bearing Store. Benefit from professional advice, fast delivery, and guaranteed product authenticity.

dana spicer driveshaft transamission

Gardan gearbox and moving shaft equipment for loaders with American Dana Spicer brand can be supplied in different series with different technical specifications and configurations. There are different options of shift and power transmission with and without lock for this Gardan loader industrial gearbox. Advanced electrical control systems and the use of an aluminum cassette converter, which leads to maximum efficiency, are other technical characteristics of Garan Loader gearbox with Dana Spicer brand.
Gardan Dana Spicer gearbox is produced in TE18 and TZL16, TZL18 series for loaders and can be supplied in various other series for forklifts, reach stackers, mining and mining machines and agricultural machines.

dana spicer drive motor for reach stacker

Connecting gearboxes on Rich Stackers with Dana Spicer American brand have the ability to produce very high moving power up to 240 kW KW. These gearboxes are connected to reach stackers and forklifts that work with high capacity axles up to lifting 110 tons.
Rich Stalker solar gearbox with Dana Spicer brand has a special compact design that occupies the minimum space in the design and this gearbox is designed and produced as 3 levels or three levels to convert speed into torque. The unique ability of the Dana Spicer gearbox to deliver high power on sloping surfaces and the movement of the Rich Stalker at an angle is one of the quality characteristics of this American product.

L90 Driveshaft Bearing

The L90 driveshaft bearing is one of the key components in the power transmission system of the Renault Tondar 90 L90. Its main function is to transfer engine power to the wheels with minimal friction and vibration.
If you
e looking to prevent driveshaft failure, extend gearbox life, and reduce vibration while driving, choosing a high-quality bearing is essential.

For free consultation, up-to-date pricing, and to place your order for the L90 driveshaft bearing, contact the experienced team at Rool Pars today. We
e here to guide you every step of the way — from selection to purchase!
– Contacting Rool Pars = A safe and confident choice

dana spicer reach stacker driveshaft

fda hc gearbox equipment and accessories of Dana Spicer is among the production guarantors of this company with more than a century of production in the field of technology and quality, known worldwide.
Dana Spicer Rich Stalker Garden has connections and couplings in various forms according to the design of the device and minimizes maintenance costs. In addition to reach stackers, Gardan Dana Spicer in the 5C series for forklifts, in the 6C series for transport equipment, in the 7C series for attachment on combines and many agricultural equipment, in the 9C series for attachment of drilling machines and in the 15C series for loader attachments is used.

Peugeot 405 Drive Shaft Bearing

The drive shaft bearing of the Peugeot 405 is one of the key components in the power transmission system. Its condition and performance have a direct impact on the smooth operation of the vehicle, fuel consumption, and the lifespan of other parts. By recognizing the signs of failure, using genuine parts, and following proper installation procedures, you can avoid many costly repairs.

If you
e looking to buy a Peugeot 405 drive shaft bearing or are unsure which brand to choose, contact the experts at Roll Pars today for a smart and informed decision.

Peugeot 206 drive shaft bearing

If you
e looking to buy an original, high-quality drive shaft bearing Ploss bearing for your Peugeot 206 at a competitive price, Roll Pars is a trusted choice. With this part, you’ll enjoy smooth and reliable performance on both city roads and long-distance drives.
To get the latest price list or request a quote for the Peugeot 206 drive shaft bearing, contact our experts at Roll Pars today.
We offer free consultation, quick responses, and the best price guarantee!

1/4-inch Drive Torque Meter Wrench

For precision work on small engines, always use a 1/4 Drive Torque Wrench to avoid over-tightening