Brake Pads

Steel factory industrial brake pads

Industrial brake pads for steel factories are designed to operate under very high temperatures and harsh working conditions, made from heat-resistant metallic and non-metallic compounds. The friction coefficient ranges from 0.4 to 0.48, providing stable performance at temperatures up to 600 degrees Celsius. Their thickness typically varies between 12 and 25 millimeters, with a density range of 2.6 to 3.1 grams per cubic centimeter. These pads offer high heat transfer capability and thermal shock resistance, essential for rolling lines, industrial furnaces, and heavy-duty transmission machinery.

Reinforced with metal fibers such as steel or brass wire, the structure increases mechanical strength and optimizes pad lifespan during repeated stop-and-go cycles. A multi-layer design with anti-wear coating reduces damage caused by impact pressures. These pads are usually manufactured according to international standards like ISO 11116 or DIN 15431. Resistance to environmental contaminants such as metal dust and industrial oils is another advantage. Steel factory industrial brake pads play a critical role in ensuring safety and efficiency in production processes.

Erfurt press brake pads

The press pad brake lining of Erfurt is manufactured using a high-quality blend of organic and mineral materials, capable of withstanding operating temperatures up to 520°C. The thickness of these linings typically ranges from 8 to 15 millimeters, with a friction coefficient between 0.40 and 0.50. The lining structure consists of phenolic resin, carbon fibers, and metal particles, providing excellent mechanical and thermal resistance while preventing thermal cracks. The wear rate of this lining is less than 0.06 millimeters per 1000 kilometers, indicating its high durability and quality.

The compressive strength of the Erfurt press pad brake lining is reported up to 32 MPa, with a surface hardness ranging between 72 and 86 Rockwell C. The design of surface grooves enhances ventilation and reduces operating temperature by up to 17 percent. These linings can withstand dynamic forces exceeding 1800 Newtons and maintain stable performance in humid and dusty environments. Their service life in heavy industrial brake systems is estimated at up to 95,000 braking cycles.

Brake pads sheep

The original brake pad backing plate is a key component in disc brake systems, serving as the base for the friction material. These plates are typically made from carbon steel with a thickness ranging from 5 to 7 millimeters and have a surface hardness between 180 and 220 Brinell. Manufacturing tolerance is maintained below 0.05 millimeters to ensure full contact with the brake piston and disc. Standard backing plates are coated with phosphate or zinc Zn to resist corrosion for up to 240 hours in salt spray tests.

The weight of each plate varies between 0.6 to 1.2 kilograms depending on the vehicle class and brake size. Drilled holes, grooves, and protrusions on the plate surface play a crucial role in reducing vibration and noise. Thermal deformation in cyclic heat tests is less than 0.02 millimeters. The yield strength measured in bending tests ranges from 280 to 350 megapascals, indicating high structural strength. The plate design must fully withstand hydraulic system pressures up to 120 bar.

Sliding Brake Pads

sliding brake pads that made by Lentsazan