• Tel
• 021-55406939 021-55426506
• | Cell
• 09123932617

Brake pads sheep

The original brake pad backing plate is a key component in disc brake systems, serving as the base for the friction material. These plates are typically made from carbon steel with a thickness ranging from 5 to 7 millimeters and have a surface hardness between 180 and 220 Brinell. Manufacturing tolerance is maintained below 0.05 millimeters to ensure full contact with the brake piston and disc. Standard backing plates are coated with phosphate or zinc Zn to resist corrosion for up to 240 hours in salt spray tests.

The weight of each plate varies between 0.6 to 1.2 kilograms depending on the vehicle class and brake size. Drilled holes, grooves, and protrusions on the plate surface play a crucial role in reducing vibration and noise. Thermal deformation in cyclic heat tests is less than 0.02 millimeters. The yield strength measured in bending tests ranges from 280 to 350 megapascals, indicating high structural strength. The plate design must fully withstand hydraulic system pressures up to 120 bar.

Brand : تی جی کو-مینتکس -لوک
Made in : ترکیه-انگلستان-اسپانیا
Machinery : ماشین الات صنعتی
Part Number : ابعاد 500*500 میلیمترمربع و 300*400 میلیمتر
WEBSITE: Brake pads sheep Iran