Elevator button , Iran

An elevator push button panel is an electrical command interface for registering floor calls in traction and hydraulic systems. Standard supply voltage is 12 or 24 volts DC, and current consumption per button is below 80 milliamperes. Contacts are silver or gold plated with contact resistance under 50 milliohms. Enclosure protection ranges from IP40 to IP55 with minimum IK08 impact rating. Stainless steel panel thickness varies between 1.2 and 2 millimeters with surface roughness below 0.8 micrometers. Mechanical life exceeds 1.5 million cycles with dielectric withstand voltage of 1000 volts AC.

The assembly includes a mechanical push switch or capacitive touch sensor, FR4 printed circuit board, and LED module rated at 2 to 3 volts. Button diameter typically ranges from 22 to 35 millimeters with operating force between 2 and 5 newtons. Communication with the controller is implemented via CAN bus or RS485 protocol. Insulation resistance between terminals exceeds 100 megaohms at 500 volts DC test. Operating temperature range is defined from minus 20 to plus 70 degrees Celsius. Quality assurance includes 1 million cycle endurance testing, 48 hour salt spray test, and illumination evaluation above 100 lux.You can order and buy Elevator button from Iran by contacting us through whatsaap and email.
WEBSITE: Elevator button Iran