Price: To be negotiated

microfilter

Exporter, Wholesale, Manufacturer
Tehran_North
+989122003350

Price: Negotiate

Price :negotiated

microfilter , Iran

Compressed air microfilters utilize main cartridges made from borosilicate glass fiber with a polymer coating. These cartridges guarantee particle separation efficiency per ISO 8573-1:2010 Class 1, Quality 1. Their effective pore size ranges from 0.01 to 0.1 microns. The design enables removal of 99.9999% of solid particles and oil aerosol droplets. Maximum operating pressure is 16 bar at an operational temperature of 50°C. Initial pressure drop at rated flow is measured below 0.1 bar. Dust Holding Capacity DHC is designed from 0.5 to 5 grams depending on size. The filter housing is constructed from anodized aluminum or 316 stainless steel.

The filter structure includes a pre-filter cyclonic separator and a depth filtration stage. Standard connections are typically G ¼" to G 1½" depending on flow rate. Nominal flow rates range from 500 to 10,000 liters per minute. The filter cartridge is sealed using NBR or Viton O-rings. A visual color-change indicator or differential pressure gauge is mounted on the housing. These filters are resistant to synthetic Polyalphaolefin PAO based oils. Cartridge service life under standard conditions reaches up to 8000 operating hours. Cartridge installation and replacement require no special tools and take less than 3 minutes.You can order and buy microfilter from Iran by contacting us through whatsaap and email.
WEBSITE: microfilter Iran

Advantages of Purchasing Microfilters for Compressed Air

Purchasing a microfilter secondary filter for compressed air enhances the output air quality to a level acceptable for sensitive equipment. These filters capture fine particles down to 0.01 microns, residual oil, and water vapor with 99.99% efficiency. Protecting pneumatic tools, valves, and cylinders from wear and corrosion is a primary benefit. Preventing final product contamination in industries such as food, pharmaceuticals, and paint, where air comes into contact with the product. Reducing equipment maintenance costs and increasing their service life. Energy savings by minimizing pressure drops in the system. Compact design and easy installation in the compressed air line. Selectable filtration grade based on the ISO 8573-1 standard e.g., Class 1 for oil and particles. Low operating cost with replaceable filter elements and a saturation indicator for optimal replacement timing. These filters significantly improve production process efficiency and product quality.

Other products