
Portable Compressor , Iran
- Price :To negotiate
- order by whatsapp
Mining compressors are constructed from 316 stainless steel and corrosion-resistant alloys. They generate compressed air at working pressures of 7 to 15 bar with flow rates of 1000 to 8000 liters per minute. An advanced cooling system features extra-heavy-duty radiators and explosion-proof fans. Power is supplied by a turbocharged diesel engine or an Ex-proof electric motor rated 100 to 500 kW. Three-stage intake filters with 0.1-micron particle separation are installed. The main housing has IP65 protection and ATEX certification for hazardous environments. An automated PLC control system regulates and logs operating parameters within 2% accuracy. These compressors operate in ambient temperatures from 0 to 50°C and up to 95% humidity.
The core design uses an oil-injected screw or two-stage piston mechanism with a 40,000-hour service life. The oil-air separation system achieves 99.9% efficiency with output below 3 ppm oil carryover. An air receiver tank with 500 to 2000-liter capacity and 1.5x pressure test is integrated. A robust steel chassis allows mounting on mobile trailers or fixed foundations. Emergency alarm and shutdown systems activate for critical pressure, temperature, and oil level parameters. Remote control panels with RS485 or Ethernet enable monitoring from 500 meters distance. Special acoustic insulation maintains operational noise below 75 dB. Units are often installed in tandem or parallel configurations for increased capacity and reliability.You can order and buy Portable Compressor from Iran by contacting us through whatsaap and email.
WEBSITE: Portable Compressor Iran
How to Select a Compressor Based on Flow Rate
Selecting a compressor based on flow rate requires calculating the total air consumption of all equipment in liters per minute or cubic meters per minute. First, extract the required flow rate for each pneumatic device from its technical specifications. Then, apply a diversity factor for devices that do not operate simultaneously. Adding 20 to 30% to the calculated flow rate is essential to cover potential leaks and future needs. Piston Reciprocating compressors are typically suitable for low to medium flow rates up to 50 m³/min. Rotary Screw compressors are chosen for medium to high flow rates 10 to 200 m³/min. Centrifugal compressors are used for very high flow rates above 200 m³/min. Additionally, the required working pressure and cooling type air or water also influence the selection. Consulting with a specialized engineer is recommended for more precise calculations.

Oil-Inject Rotary Screw Compressors

compressor

Oil Free Compressor

microfilter

Oil-Inject Rotary Screw Compressors

Oil-Inject Rotary Screw Compressors

Medium and High Pressure Compressor

Oil-Inject Rotary Screw Compressors

Breathing Compressor

tank


