Oil-Inject Rotary Screw Compressors , Iran

Screw compressors are built from forged steel alloy with hard chrome-plated male and female rotors. The rotor length-to-diameter ratio typically ranges from 1.0 to 1.7, with a surface finish better than Ra 0.8 microns. Air delivery capacity varies from 10 to 5000 m³/h at working pressures of 7 to 13 bar. The rotors are synchronized with a timing accuracy of 0.001 seconds. A forced-feed oil lubrication system operates at 50 to 200 liters per minute. These compressors achieve a volumetric efficiency of up to 92%. Sound pressure level at one meter is typically maintained below 70 dBA. Discharge air temperature is controlled to 15°C above ambient via an oil cooling system.

The compressor structure features a cast iron housing with integrated cooling fins. A three-stage oil separation system removes oil particles with 99.9% efficiency. A PLC controller with a touchscreen display monitors performance and conditions. A load regulation valve with a 2-second response optimizes energy consumption. A two-stage intake air filter operates with 99.8% particle removal efficiency. The compressor is designed for up to 100,000 hours of operation under harsh conditions. An anti-pulsation and vibration dampening system limits vibration to under 4.5 mm/s. All piping connections are hydrostatically tested for 25 bar pressure.You can order and buy Oil-Inject Rotary Screw Compressors from Iran by contacting us through whatsaap and email.
WEBSITE: Oil-Inject Rotary Screw Compressors Iran