Price: To be negotiated

restaurant porcelain- small jug

Exporter, Wholesale, Manufacturer
Tehran
+989122003350

Price: Negotiate

Price :negotiated

restaurant porcelain- small jug , Iran

Price :To negotiate
order by whatsapp

The small restaurant porcelain water pitcher is manufactured from dense porcelain with water absorption below 0.5 percent and density between 2.3 and 2.6 grams per cubic centimeter. Firing temperature ranges from 1280 to 1400 degrees Celsius, providing flexural strength above 90 megapascals. Nominal capacity is designed between 0.3 and 0.8 liters, and net weight varies from 350 to 800 grams. Wall thickness is selected between 3 and 5 millimeters to enhance impact resistance and durability in daily use. A hygienic glaze with surface hardness above 6 on the Mohs scale and high chemical resistance is applied. Overall dimensional tolerance is controlled within ±1.5 millimeters.

The structure consists of a cylindrical or spherical body with an integrated handle and reinforced pouring spout. Handle curvature radius ranges from 15 to 30 millimeters to optimize ergonomics and stress distribution. The liquid discharge angle is set between 15 and 25 degrees to ensure controlled, drip free pouring. Thermal resistance is guaranteed from minus 20 to plus 200 degrees Celsius. The underside incorporates a foot ring with diameter between 4 and 8 centimeters for improved stability. Quality testing includes thermal shock evaluation, handle load resistance up to 20 newtons, and compatibility assessment with industrial dishwashers.You can order and buy restaurant porcelain- small jug from Iran by contacting us through whatsaap and email.
WEBSITE: restaurant porcelain- small jug Iran

Dishwasher-Safe Pitcher for Industrial Dishwashers in iran

A dishwasher-safe pitcher for industrial dishwashers should be made of hard porcelain or polypropylene with a minimum heat resistance of 120 °C to withstand repeated cycles without deformation. Standard capacity is designed between 0.5 and 1.5 liters to match daily service volume. The mouth diameter of 70–90 mm facilitates rapid water discharge and prevents liquid retention. The body should be free of unnecessary protrusions with smooth internal angles to allow complete water and detergent flow. Wall thickness of 2–3 mm for porcelain and 1.5–2 mm for plastic ensures durability and thermal stability. The handle should be ergonomic and heat-insulated to maintain operator safety when pouring hot water.

Other products