| Exporter, Wholesale, Manufacturer | |
| Tehran-South |  |
| +989122003350 | |
- Price :negotiated
Concrete Pump Parts , Iran
Concrete pump parts include hydraulic components, mechanical assemblies, and concrete contact elements designed for operating pressures between 60 and 130 bar. Delivery cylinders are manufactured with internal diameters of 180 to 230 millimeters and strokes from 1400 to 2100 millimeters. Wear plates and cutting rings are produced from high chromium alloy with hardness above 60 HRC. Delivery pipelines are selected with nominal diameters of 100 to 150 millimeters and wall thicknesses of 4 to 7 millimeters. The S valve is made of wear resistant alloy steel with induction hardened depth of 3 to 5 millimeters. Bushings and bearings are machined with dimensional tolerances below 0.05 millimeters.
The hydraulic system includes a piston pump rated at 320 bar with flow rates from 200 to 400 liters per minute. High pressure hoses comply with SAE standards and a minimum 4 to 1 safety factor. Hopper and agitator components are fabricated from wear resistant steel with thicknesses between 6 and 10 millimeters. Service life of consumable parts varies from 500 to 2000 operating hours depending on aggregate grading and mix design. Quality control procedures include hydrostatic pressure testing, leakage inspection, weld examination, and surface hardness measurement. Concrete transfer efficiency remains above 85 percent under proper maintenance conditions.You can order and buy Concrete Pump Parts from Iran by contacting us through whatsaap and email.
WEBSITE: Concrete Pump Parts Iran
Replacement and Maintenance of Concrete Pump Parts in iran
Replacement and maintenance of concrete pump components must be performed based on wear index, operating hours, and recorded working pressure. Wear plates and cutting rings should be replaced when thickness decreases by more than 25 percent. Inspection of the S valve is mandatory every 250 operating hours, and allowable clearance must not exceed 1.5 millimeters. Hydraulic cylinders must undergo internal leakage pressure testing every 500 hours. Efficiency loss above 10 percent indicates packing or piston failure. Delivery pipelines become critical when wall thickness drops below 80 percent of the original value. Bearing lubrication with lithium based grease is required every 50 operating hours. Recording maintenance data in a CMMS system reduces unexpected downtime by at least 15 percent.
