| Exporter, Wholesale, Manufacturer | |
| Tehran-South |  |
| +989122003350 | |
- Price :negotiated
Concrete Pump , Iran
The tower concrete pump is an industrial high-pressure concrete transfer unit for high-rise and construction projects. It operates with a diesel or electric motor rated 55 to 132 kilowatts. Concrete pumping capacity ranges from 30 to 100 cubic meters per hour, with operating pressures between 70 and 130 bar. Cylinder diameters are 200 to 250 millimeters, with piston strokes of 1500 to 1800 millimeters. Hydraulic or electrohydraulic control systems improve flow accuracy and stability. The reinforced steel chassis and frame ensure safety and structural integrity at elevated heights.
Structurally, the pump features a steel hopper with a wear-resistant internal agitator and an S valve or rock valve for uniform concrete flow. Delivery pipes are made from high wear-resistant alloy steel with diameters of 100 to 150 millimeters. Adjustable supports and stabilizers maintain stability under heavy load conditions. Automatic lubrication and multi-stage filtration extend component lifespan. Design compliance with ISO 21573 and EN 206 ensures operational efficiency, durability, and safety.You can order and buy Concrete Pump from Iran by contacting us through whatsaap and email.
WEBSITE: Concrete Pump Iran
Method to Increase the Service Life of a Boom Concrete Pump in iran
Extending the service life of a boom concrete pump requires a preventive maintenance program based on operational data and MTBF indicators. The hydraulic system working pressure must remain between 250 and 320 bar with no more than 5 percent deviation. Hydraulic oil temperature should be controlled between 40 and 60 degrees Celsius to maintain ISO VG viscosity standards. Daily inspection of the delivery cylinder and S valve must be recorded and analyzed every 8 operating hours. Pipeline wear becomes critical when wall thickness is reduced by more than 20 percent. Regular lubrication of pins and bushings with lithium based grease every 50 operating hours is mandatory. Pressure and flow sensors must be calibrated every 6 months to keep measurement error below 2 percent.
