| Exporter, Wholesale, Manufacturer | |
| Tehran-South |  |
| +989122003350 | |
- Price :negotiated
Concrete Boom Pump Spare Parts , Iran
Concrete boom pump spare parts include conveying, distribution, and hydraulic control components designed for working pressures of 80 to 130 bar. Delivery pipelines are manufactured from alloy steel with hardness between 58 and 62 HRC. Wall thickness typically ranges from 4 to 7 millimeters with nominal diameters of 100 to 150 millimeters. Elbows and couplings feature internal wear resistant liners with service life of 30000 to 60000 cubic meters of concrete. Delivery cylinders are produced with internal diameters of 180 to 230 millimeters and strokes from 1400 to 2100 millimeters. The S valve or Rock Valve is made from wear resistant alloy steel with induction heat treatment.
The hydraulic system uses a piston pump with flow rates of 200 to 400 liters per minute and nominal pressure of 320 bar. High pressure hoses comply with SAE 100R2 standard and a 4 to 1 safety factor. Wear plates and cutting rings are produced from high chromium alloy with hardness above 60 HRC. Bearings and bushings are assembled with dimensional tolerances below 0.05 millimeters. Quality control includes hydrostatic pressure testing, leakage inspection, and ultrasonic weld examination. Service life of consumable parts ranges from 500 to 2000 operating hours depending on concrete flow and aggregate ratio.You can order and buy Concrete Boom Pump Spare Parts from Iran by contacting us through whatsaap and email.
WEBSITE: Concrete Boom Pump Spare Parts Iran
Purchase of Genuine and High Quality Boom Concrete Pump Parts in iran
Purchasing genuine and high quality boom concrete pump parts directly impacts efficiency, safety, and service life of the pumping system. Standard components must comply with ISO 9001 and include certified material analysis documentation. The wear resistance of concrete delivery pipes should not be less than 58 HRC hardness. Pipe wall thickness must be at least 4.5 millimeters for an operating pressure of 85 bar. Using an S tube valve with chromium based wear resistant alloy increases service life by up to 30 percent. Seals and O rings must withstand temperatures of 80 degrees Celsius and high dynamic pressure. Selecting reputable brands with serial traceability reduces project downtime risk by 25 percent. Supplying original spare parts lowers maintenance costs and improves operational reliability.
