Stud Bolt B7

ajax-hex-bolt

Iran

021-55429480

The B7 stud bolt is a threaded fastener made from chromium-molybdenum alloy steel ASTM A193 Grade B7, designed for high-temperature and high-pressure applications. It has a minimum tensile strength of 125 ksi approximately 860 MPa and a minimum yield strength of 105 ksi about 725 MPa. Its surface hardness ranges from 24 to 35 HRC and it is manufactured in various heat-treated classes. The B7 stud bolt typically features a Unified 2A thread and is paired with a 2H heavy hex nut. It is produced in accordance with international standards such as ASME B18.31.2 and ASTM A193, and is commonly used in oil, gas, petrochemical, and power generation industries.

The operating temperature range for a B7 stud bolt is from minus 29 to plus 427 degrees Celsius, ensuring reliable performance under extreme thermal conditions. It is available in standard diameters from 1/4 inch to 4 inches with custom lengths upon request. Surface finishes include hot-dip galvanizing or black oxide coating to enhance corrosion resistance. Dimensional tolerances are defined based on ANSI/ASME B1.1 standards. For critical applications, non-destructive tests such as UT or MPI are also performed. Due to its high strength and mechanical stability, the B7 stud bolt is recommended for high-pressure operational environ


ajax-hex-bolt	021-55429480

Steel Stud Bolt B7 Size 58 Inch 10 Centimeters

The 5/8 inch steel stud bolt with a length of 10 centimeters is manufactured according to ASTM A193 standard and grade B7. These bolts are made from high-strength steel with a maximum temperature resistance of 450°C, designed for flange and pipe connections. The stud bolt has a thread diameter of 5/8 inch and a length of 100 millimeters, providing high mechanical strength in demanding industrial environments. The hot-dip galvanized coating enhances corrosion and rust resistance, ensuring a longer service life in humid conditions.

These stud bolts offer high tensile strength and suitable hardness to withstand mechanical loads and operational pressures. The thread design allows quick assembly and disassembly without damaging the connection quality. Grade B7 indicates a specific chemical composition and mechanical properties for stable performance at elevated temperatures. The 5/8 inch by 10-centimeter galvanized steel stud bolt is widely used in the oil, gas, and petrochemical industries and complies with global standards.

Steel Stud Bolt B7 Size 1/2 Inch 10 Centimeters

The 1/2*100 inch steel stud bolt is manufactured according to ASTM A193 standard and grade B7. These bolts are made from steel with a maximum temperature resistance of 450°C, suitable for flange and pipe connections. The stud bolt has a length of 100 millimeters and a thread diameter of 1/2 inch, ensuring high mechanical strength in demanding industrial conditions. The hot-dip galvanized surface coating increases corrosion and rust resistance, extending the service life of the connection in humid and corrosive environments.

These stud bolts offer high tensile strength and appropriate hardness to withstand mechanical loads and operational pressures. The thread design allows easy assembly and disassembly without compromising connection quality. Grade B7 indicates a specific chemical composition and mechanical properties that ensure reliable performance at high temperatures. The use of 1/2*100 inch galvanized steel stud bolts is common and standard in oil, gas, and petrochemical industries.