teknikabzarnovin |
Iran |
09902245921 |
The 1/8 G water pipe hand tap is designed according to the BSPP British Standard Pipe Parallel standard and has a nominal diameter of 1/8 inch, equivalent to 9.728 millimeters. It features a thread pitch of 28 threads per inch TPI with a 55-degree thread angle. The thread type is parallel, intended for connections that require sealing with a washer or O-ring. This tap is typically made from high-speed steel HSS with a surface hardness of 60 to 65 HRC, offering good resistance to wear and heat. The overall length usually ranges from 45 to 65 millimeters, and the square shank is designed for use with a hand tap wrench.
The recommended pilot drill diameter for this tap is approximately 8.8 millimeters to ensure maximum compatibility with the thread profile. The ideal manual threading speed is between 10 to 15 revolutions per minute. This tap is used for creating parallel threads in water, air, or low-pressure fluid pipe fittings. It is commonly applied in pneumatic systems, hydraulics, and residential or industrial installations. High manufacturing quality and precise chip flute geometry ensure accurate threads and long service life.
![]() | |
teknikabzarnovin | 09902245921 |
teknikabzarnovin |
Iran |
09902245921 |
The 7/16 inch BSW hand tap is designed according to the British Standard BS 84 and features a thread pitch of 14 TPI Threads Per Inch. The thread angle is 55 degrees, and the nominal external diameter measures 11.11 millimeters. This tap is typically made from high-speed steel HSS or hardened alloy steel with a surface hardness between 58 and 62 HRC. The overall length ranges from 70 to 90 millimeters, and the shank diameter is approximately 6 to 8 millimeters. It is suitable for producing precise threads in steel, aluminum, and brass components with medium wall thickness.
The 7/16 BSW hand tap is commonly available as a three-piece set including taper, intermediate, and bottoming taps for progressive and accurate thread cutting. The resulting thread accuracy complies with class 2B under the BSW standard and is suitable for low to medium-pressure connections. Its straight or spiral flutes help remove chips and reduce jamming during operation. When used manually, a rotation speed of under 30 RPM is recommended. Applying a medium-viscosity tapping oil increases tool life and reduces cutting stress on the thread surface.
![]() | |
teknikabzarnovin | 09902245921 |
teknikabzarnovin |
Iran |
09902245921 |
The manual pipe tap 1 inch G is designed according to the BSP British Standard Pipe standard and features a thread pitch of 11 TPI threads per inch. The external thread diameter for this model is 33.25 mm with a thread angle of 55 degrees. It is typically made from high-carbon alloy steel or HSS High-Speed Steel, with a hardness rating between 58 and 62 HRC. The total tap length ranges from 90 to 110 mm, and the shank diameter varies between 14 to 18 mm depending on design. This tap is used for creating internal threads in galvanized, brass, and steel pipes.
The 1 inch G manual tap is commonly supplied in a three-piece set, including taper, intermediate, and plug taps, enabling gradual and accurate material removal. The thread accuracy complies with the G class tolerance as defined by ISO 228-1 standards. The tap features straight or spiral flutes to evacuate chips and prevent binding. Using medium-viscosity tapping oil reduces friction and extends tool life. In manual applications, the rotation speed is usually kept below 20 RPM to ensure better control and safety.
![]() | |
teknikabzarnovin | 09902245921 |
teknikabzarnovin |
Iran |
09902245921 |
The 1-inch 12 UNF hand tap has a nominal diameter of 1 inch and a thread pitch of 12 threads per inch TPI, designed according to the Unified National Fine standard. The thread angle is 60 degrees, which enhances mechanical strength and joint quality. The tool is made from high-speed steel HSS with a hardness of 60 to 65 HRC, providing high resistance to wear and heat. The overall length typically ranges from 90 to 110 millimeters, and the square shank allows quick and secure installation in a tap wrench. Precise chip removal flutes ensure uniform cutting and reduce the force required during threading.
This hand tap is suitable for creating precise internal threads in metals ranging from soft to hard. The recommended pilot drill size for this tap is approximately 22.1 millimeters to achieve optimal thread engagement. The suggested manual operating speed ranges from 8 to 12 revolutions per minute to prevent overheating and tool damage. This tap is widely used in aerospace, automotive, and machining industries, delivering very high-quality threads.
![]() | |
teknikabzarnovin | 09902245921 |
teknikabzarnovin |
Iran |
09902245921 |
The 7/8 inch BSW hand tap is designed with a thread pitch of 9 threads per inch TPI according to the British Standard Whitworth BSW specification. Its nominal diameter is 0.875 inches, approximately 22.23 millimeters. The thread angle is 55 degrees, which ensures uniform stress distribution during the tapping process. For high precision manual threading, this tool is typically made from high-speed steel HSS. The overall length of the tap usually ranges between 80 to 100 millimeters, and its square shank is designed to fit into a tap wrench.
This industrial tool is suitable for cutting internal threads in medium-hard metal or alloy parts. The 7/8 BSW hand tap often comes in a three-piece set, including taper, intermediate, and bottom taps. The recommended drill size for the pilot hole is 20 millimeters to achieve optimal engagement between the tap and workpiece. The suggested manual operating speed is approximately 10 to 15 revolutions per minute. This tap is widely used in machining, plumbing, and industrial maintenance applications.
![]() | |
teknikabzarnovin | 09902245921 |
teknikabzarnovin |
Iran |
09902245921 |
The 3/16 inch UNF hand tap has a nominal diameter of 0.1875 inches and a thread pitch of 24 threads per inch TPI, following the Unified National Fine UNF standard. This tap features a 60-degree thread angle, designed for creating precise and high-quality threads. It is typically made from high-speed steel HSS with high wear resistance. The overall length of the tool ranges between 40 to 60 millimeters, and its square shank is designed for easy fitting into a tap wrench. This tap is suitable for use in both soft and hard metals with excellent dimensional accuracy.
This type of tap is widely used in automotive and aerospace industries due to its fine UNF thread standard and precision. The recommended drill size for the pilot hole is 4.2 millimeters, ensuring optimal engagement between the thread and workpiece. The suggested manual operating speed ranges from 15 to 20 revolutions per minute. The 3/16 inch UNF tap performs efficiently in repair and manufacturing operations requiring fine and delicate threads.
![]() | |
teknikabzarnovin | 09902245921 |
teknikabzarnovin |
Iran |
09902245921 |
The 10 HSS hand tap is made from high-speed steel with high hardness and excellent resistance to wear and heat. Its length typically ranges from 55 to 85 millimeters, and its nominal diameter is defined according to size 10 in common standards. The square shank allows for quick and secure fitting into a tap wrench. Precise chip removal flutes provide uniform cutting and reduce the required force during threading. The surface hardness usually ranges between 60 and 65 HRC, ensuring long tool life and durability.
This hand tap is suitable for creating high-precision internal threads in metals ranging from soft to hard. The recommended manual operating speed is between 10 to 18 revolutions per minute to prevent overheating and tool damage. The pilot drill size is typically selected at about 85 to 90 percent of the tap diameter to achieve optimal thread engagement. The 10 HSS tap is widely used in machining, industrial repair, and precision equipment manufacturing, delivering excellent thread quality.
![]() | |
teknikabzarnovin | 09902245921 |
teknikabzarnovin |
Iran |
09902245921 |
The 1/2 inch UNF hand tap has a nominal diameter of 0.5 inches and a thread pitch of 20 threads per inch TPI, designed according to the Unified National Fine UNF standard. Its thread angle is 60 degrees, which enhances strength and joint quality. The tap is typically made from high-speed steel HSS with a hardness between 60 to 65 HRC, ensuring high resistance to wear and heat. The overall length usually ranges from 70 to 90 millimeters, and its square shank allows for easy installation in a tap wrench. Precise chip removal flutes reduce friction and improve threading quality.
This hand tap is widely used for creating precise internal threads in both soft and hard metals. The recommended pilot drill size is 10.5 millimeters to achieve optimal thread engagement. The suggested manual operating speed is between 10 to 15 revolutions per minute to prevent tool breakage. The 1/2 UNF tap is extensively used in aerospace, automotive, and industrial repair industries, providing excellent thread quality.
![]() | |
teknikabzarnovin | 09902245921 |
teknikabzarnovin |
Iran |
09902245921 |
The 6 HSS hand tap is made from high-speed steel with high hardness and excellent resistance to wear and heat. Its length typically ranges from 50 to 75 millimeters, and its nominal diameter is defined according to size 6 in common standards. The square shank allows for quick and secure fitting into a tap wrench. Precise chip removal flutes ensure uniform cutting and reduce the force required during threading. The surface hardness usually ranges between 60 and 65 HRC, guaranteeing long tool life and durability.
This hand tap is suitable for creating high-precision internal threads in metals ranging from soft to hard. The recommended manual operating speed is between 10 to 18 revolutions per minute to prevent overheating and tool damage. The pilot drill size is typically selected at about 85 to 90 percent of the tap diameter to achieve optimal thread engagement. The 6 HSS tap is widely used in machining, industrial repair, and precision equipment manufacturing, providing high-quality threads.
![]() | |
teknikabzarnovin | 09902245921 |
teknikabzarnovin |
Iran |
09902245921 |
The 9/16 inch UNC hand tap has a nominal diameter of 0.5625 inches and a thread pitch of 18 threads per inch TPI based on the Unified National Coarse UNC standard. Its thread angle is 60 degrees, providing high mechanical strength and ensuring improved joint quality. This tap is typically made from high-speed steel HSS with high hardness to resist wear and heat. The overall length of the tool ranges between 70 to 90 millimeters, and its square shank is designed for easy fitting into a tap wrench. Precise flutes ensure uniform chip removal and increase tool life.
This type of tap is highly suitable for cutting internal threads in medium to hard metal parts. The recommended drill size for the pilot hole is 48.1 millimeters to achieve optimal thread fit. The suggested manual operating speed is between 10 to 15 revolutions per minute to prevent tool breakage. The 9/16 UNC tap is widely used in automotive, machining, and industrial repair industries, providing excellent thread quality.
![]() | |
teknikabzarnovin | 09902245921 |
teknikabzarnovin |
Iran |
09902245921 |
The 5 HSS hand tap is made from high-speed steel HSS with high hardness and significant resistance to wear and heat. This tool is typically available in various standard sizes, with lengths ranging from 50 to 80 millimeters. Its square shank allows for easy and secure fitting into a tap wrench. Precise chip removal flutes help ensure uniform cutting and reduce friction during threading. The surface hardness of the tap usually ranges between 60 and 65 HRC, guaranteeing durability and long tool life.
The 5 HSS hand tap is suitable for cutting internal threads in both soft and hard metals with high dimensional accuracy. The recommended manual operating speed is between 10 to 20 revolutions per minute to prevent excessive heat buildup. The pilot drill size varies depending on the tap size but is typically about 85 to 90 percent of the tap’s diameter. This tool is widely used in machining, industrial repair, and precision equipment manufacturing, delivering high-quality threads.
![]() | |
teknikabzarnovin | 09902245921 |
teknikabzarnovin |
Iran |
09902245921 |
The 1/4 inch UNC hand tap has a nominal diameter of 0.25 inches and a thread pitch of 20 threads per inch TPI, conforming to the Unified National Coarse standard. Its thread angle of 60 degrees enhances mechanical strength and improves joint quality. This tap is made from high-speed steel HSS with a hardness of 60-65 HRC, providing optimal resistance to wear and heat. The overall length typically ranges between 50 to 70 millimeters, and its square shank allows easy installation in a tap wrench. Precise flutes ensure uniform chip removal and extend tool life.
This tool is highly suitable for cutting internal threads in medium to hard metal parts. The recommended pilot drill size for this tap is 5.3 millimeters, ensuring optimal thread engagement. The suggested manual operating speed ranges from 12 to 18 revolutions per minute. The 1/4 UNC tap is widely used in machining, repair, and industrial equipment manufacturing, delivering precise and standard thread quality.
![]() | |
teknikabzarnovin | 09902245921 |
teknikabzarnovin |
Iran |
09902245921 |
The 12 HSS hand tap is made from high-speed steel with high hardness and excellent resistance to wear and heat. Its length typically ranges from 60 to 90 millimeters, and its nominal diameter varies according to size number 12 in different standard systems. The square shank allows easy and secure fitting into a tap wrench. Precise flutes and thread geometry improve chip removal quality and reduce the required force during threading. The surface hardness usually ranges between 62 to 65 HRC, ensuring high tool durability.
This hand tap is suitable for creating high-precision internal threads in both soft and hard metal parts. The recommended manual operating speed is between 10 to 18 revolutions per minute to prevent overheating and tool damage. The pilot drill size is typically about 85 to 90 percent of the tap diameter. The 12 HSS tap is widely used in machining, industrial repair, and precision equipment manufacturing, delivering excellent thread quality.
![]() | |
teknikabzarnovin | 09902245921 |
teknikabzarnovin |
Iran |
09902245921 |
The 8 HSS hand tap is made from high-speed steel with high hardness and excellent resistance to wear and heat. Its length typically ranges from 50 to 80 millimeters, and its nominal diameter is defined according to size number 8 in various standard systems. The square shank allows for easy and secure fitting into a tap wrench. Precise flutes and thread geometry provide uniform cutting and reduce the required force during threading. The surface hardness usually ranges between 60 and 65 HRC, ensuring tool durability.
This hand tap is suitable for creating high-precision internal threads in both soft and hard metals. The recommended manual operating speed is between 10 to 18 revolutions per minute to prevent overheating and damage. The pilot drill size is typically about 85 to 90 percent of the tap diameter. The 8 HSS tap is widely used in machining, industrial repair, and precision equipment manufacturing, delivering excellent thread quality.
![]() | |
teknikabzarnovin | 09902245921 |
teknikabzarnovin |
Iran |
09902245921 |
The 1/8 inch BSW hand tap has a nominal diameter of 0.125 inches and a thread pitch of 40 threads per inch TPI based on the British Standard Whitworth specification. The thread angle is 55 degrees, enhancing strength and ensuring uniform stress distribution. This tap is typically made from high-speed steel HSS with high wear and heat resistance. Its overall length usually ranges between 30 to 50 millimeters, and precise chip grooves guarantee high-quality threading. The square shank allows easy fitting into a tap wrench.
This tap is suitable for cutting internal threads in medium-hard metal parts. The recommended drill size for the pilot hole is 2.7 millimeters to achieve optimal thread engagement. The suggested manual operating speed is about 15 revolutions per minute. The 1/8 BSW tap is widely used in machining, repair, and installation industries and is ideal for fine and precise threading tasks.
![]() | |
teknikabzarnovin | 09902245921 |