8mm eren brake lining 50X50 , Iran

The industrial brake lining sheet EREN Turkey 50X50 with a thickness of 8 mm is manufactured using high-density composite fibers reinforced with brass and synthetic resins. It has an approximate density of 1.95 g/cm³ and provides consistent friction stability under varying pressure and temperature. The coefficient of friction ranges between 0.38 and 0.45 in dry conditions, ensuring reliable performance in heavy-duty mechanical applications such as presses, cranes, and industrial brakes. The sheet is produced with precise dimensional tolerance of ±0.1 mm, ensuring uniform contact and consistent braking torque across the entire surface.

This EREN 50X50 brake lining sheet demonstrates outstanding wear resistance of approximately 0.20 mm³/N·m, allowing extended service life in high-friction environments. It can operate efficiently in both dry and lubricated systems without significant loss of frictional efficiency. Under oil-immersed conditions, the friction coefficient slightly decreases to around 0.32–0.35, maintaining smooth and stable engagement. The material is thermally resistant up to 350°C, with short-term exposure tolerance up to 400°C, ensuring mechanical integrity under severe working cycles.You can order and buy 8mm eren brake lining 50X50 from Iran by contacting us through whatsaap and email.
WEBSITE: 8mm eren brake lining 50X50 Iran