| Exporter, Wholesale, Manufacturer | |
| Tehran |  |
| +989122003350 | |
- Price :negotiated
hotel porcelain- Sugar Pot , Iran
- Price :To negotiate
- order by whatsapp
Hotel porcelain sugar bowls are manufactured from feldspathic porcelain with water absorption below 0.5 percent and a fully dense microstructure. The firing process is performed at temperatures between 1350 and 1400 degrees Celsius. Final density ranges from 2.3 to 2.5 grams per cubic centimeter. Flexural strength is at least 90 megapascals, and surface hardness is approximately 6 on the Mohs scale. A transparent or decorative glaze layer with thickness of 0.2 to 0.4 millimeters is applied. Typical volumetric capacity is designed between 200 and 400 milliliters.
The structure consists of a spherical or cylindrical body with a precisely fitted overlapping lid. Wall thickness is generally selected between 4 and 6 millimeters to ensure mechanical strength and thermal stability. Thermal shock resistance is evaluated within a temperature differential of 120 to 150 degrees Celsius. The glazed surface exhibits near zero porosity and chemical resistance within a pH range of 2 to 11. Dimensional tolerance for rim diameter is usually maintained within ±2 millimeters. Quality control includes lid fit testing, water absorption measurement, and glaze uniformity inspection.You can order and buy hotel porcelain- Sugar Pot from Iran by contacting us through whatsaap and email.
WEBSITE: hotel porcelain- Sugar Pot Iran
Cleaning and Maintenance of Hotel Porcelain Sugar Bowls in iran
To clean a hotel porcelain sugar bowl, first empty all remaining sugar to prevent moisture buildup. Washing in an industrial dishwasher at 60 to 75 degrees Celsius is recommended. Use detergents with neutral pH between 6 and 8 to protect the glaze surface. Avoid abrasive pads or harsh cleaners, as glaze hardness is around 6 on the Mohs scale. After washing, ensure complete drying to maintain water absorption below 0.5 percent. Store pieces with at least 2 centimeters spacing to prevent chipping. Conduct inspections every 3 months to check for hairline cracks or rim damage. Remove any cracked piece from service immediately.
