| Exporter, Wholesale, Manufacturer | |
| Tehran |  |
| +989122003350 | |
- Price :negotiated
Rotary Group , Iran
- Price :To negotiate
- order by whatsapp
The HPR rotary group is a radial piston pump/motor with variable displacement and advanced electro-hydraulic control. Its main housing is machined from EN AC-42100 T6 aluminum alloy with 320 MPa yield strength. The cylinder block is designed from hardened 34CrMo4 steel with 7 radial pistons and coated needle roller bearings. The control system utilizes an electro-hydraulic servo valve with 20-millisecond response and 0.15% positioning accuracy. This unit manages 400 bar continuous operating pressure and 450 bar peaks per ISO 4 standards. Nominal flow reaches 120 liters per minute at 1800 RPM and maximum displacement. Volumetric efficiency under rated conditions is 97% with 93% overall efficiency.
The intelligent control structure includes an Electronic Control Module ECM with CANopen interface and programmable profiles. An integrated thermal management system with an oil-water heat exchanger and variable flow control operates continuously. The output shaft is manufactured from 42CrMo4 steel with a Titanium Nitride TiN coating for wear resistance. The hydraulic fluid operating temperature range is defined between -30°C to +120°C. Generated noise level at nominal pressure and one-meter distance measures below 70 decibels A-weighted. A filtration system rated at 10 microns with a preventive warning contamination sensor is installed. The design service life until first overhaul under demanding operating conditions is 20,000 hours.You can order and buy Rotary Group from Iran by contacting us through whatsaap and email.
WEBSITE: Rotary Group Iran
Guide to Purchasing and Pricing HPR Rotary Group
Selecting an HPR rotary group should be based on exact flow rate and material viscosity. The body and vane materials, such as stainless or carbon steel, are critical. Compatibility with the operational chemical environment and temperature must be verified. A high-pressure mechanical seal system is essential in the HPR model. The port diameter and configuration must match existing piping. The price of this model is influenced by motor power, flow rate, and construction materials. The price of standard HPR units is higher compared to regular models. Always request factory test certificates and after-sales service.
