ISO 9001

VHO-5 hydraulic clamp, 220 mm working width

The VHO-5 hydraulic clamp with a 220-millimeter jaw length has a clamping force capacity of 5 tons and an exact jaw length of 220 millimeters. This product is made from alloy steel with a tensile strength of 780 MPa, and its hydraulic system can withstand a working pressure of up to 200 bar. The clamp’s operational accuracy is guaranteed within 0.007 millimeters, making it highly suitable for sensitive industrial projects. The overall weight of the device is approximately 7 kilograms, and its ergonomic design allows for quick and easy installation. The wear and corrosion-resistant coating increases the clamp’s durability and service life under harsh working conditions.

In the technical structure of the VHO-5 hydraulic clamp, the hydraulic system provides optimal performance with a response time of less than 0.5 seconds. This clamp is designed according to international ISO 12100 and ISO 9001 standards for safety and quality. The anti-corrosion coating thickness is about 110 microns, offering high resistance in industrial environments. Precise pressure adjustment through the hydraulic control system ensures flexible usability. The clamp’s operational lifespan exceeds 250,000 pressure cycles, delivering stable performance under various conditions.

insert

Sandvik turning inserts are made from tungsten carbide with an advanced TiAlN coating that provides thermal resistance up to 1000 degrees Celsius. Typical dimensions include a thickness of 4.76 mm, cutting edge length between 8 to 12.7 mm, and nose radius ranging from 0.4 to 1.2 mm, which play a crucial role in precise chip removal and extended tool life. The positive rake angle varies between 7 to 20 degrees, and the clearance angle is 6 to 7 degrees, helping to reduce cutting forces and prevent vibration. Sandvik inserts are available in geometric types such as TNMG, CNMG, and TCGT, each optimized for different materials like steel, stainless steel, and aluminum.

Under operating conditions, Sandvik turning inserts can withstand cutting speeds from 250 to 700 meters per minute and feed rates from 0.1 to 0.4 millimeters per revolution, depending on the workpiece material. The nano-layer coating technology and optimized insert geometry increase machining accuracy and reduce tool failure. Precise manufacturing standards compliant with ISO 9001 ensure quality and quick insert replacement in tool holders. Proper use of coolant can extend tool life up to 150 minutes under heavy machining conditions.

HYDRAULIC MACHINE VISE

The Vortex VH-5 hydraulic clamp has a load capacity of up to 500 kilograms and is designed for handling steel sheets with thicknesses ranging from 1 to 20 millimeters. The device weighs 10 kilograms and features a structure made of alloy steel with an anti-rust coating. Its hydraulic system operates at a working pressure of 18 megapascals and is equipped with a safety locking mechanism to prevent accidental load slippage. The clamp arm measures 25 centimeters, and its movement is precisely controlled by a hydraulic jack.

The VH-5 design follows DIN 5692 and ISO 9001 standards to ensure safety and durability. This hydraulic clamp includes an ergonomic handle with a non-slip coating for easy and safe operation. The device has been tested to perform reliably in temperatures ranging from -10 to +50 degrees Celsius, making it fully compatible with industrial environments. VH-5 is widely used in construction industries and steel sheet manufacturing plants, delivering high efficiency and productivity.

Vortex VH-6 hydraulic clamp

The Vortex VH-6 hydraulic clamp is equipped with a hydraulic system operating at a pressure of 150 bar, capable of generating a clamping force up to 6000 Newtons. The device features a jaw stroke of 6 centimeters, allowing it to secure parts of varying thicknesses. Its body is made from heat-treated steel alloy with an anti-corrosion coating, ensuring high durability and strength. The total weight of the device is approximately 12 kilograms, offering a good balance between portability and stability.

The VH-6 control system is designed for manual and hydraulic operation, enabling precise pressure adjustment. The device dimensions are 25 by 12 by 15 centimeters, making it widely applicable in CNC machines and small industrial equipment. Jaw alignment accuracy is less than 0.1 millimeters, ideal for sensitive processes. This clamp complies with ISO 9001 international standards and is optimized to reduce vibration during operation.

Arisan Stock Clutch Disc and Plate Valeo Brand

The Arisan stock clutch disc and plate by Valeo is designed with a 240 mm diameter and 8 mm thickness to optimize power transfer from the engine to the gearbox. The plate is made of durable steel, and the disc is constructed from ductile cast iron, capable of withstanding thermal stress up to 500°C. Special grooves and channels reduce vibration and increase friction contact surface. Each assembly weighs approximately 7.5 kg and can handle torque up to 230 Nm. Easy installation and full compatibility with the Arisan clutch system extend the service life of the assembly up to 100,000 kilometers.

The Valeo clutch plate provides uniform pressure and adequate flexibility to prevent slipping at high engine speeds. The disc features torsion springs that reduce shock and minimize operational noise. The contact thickness of the plate with the disc is 8 mm, and the friction coefficient is 0.35, ensuring stable performance between 20°C and 450°C. The groove spacing is precisely 6 mm, optimizing force distribution across the disc surface. This assembly is suitable for both urban and highway driving and complies with ISO 9001 international quality standards.

Peugeot Pars XU7P Stock Clutch Disc and Plate Valeo Brand

The Peugeot Pars XU7P stock clutch disc and plate by Valeo is designed with a 235 mm diameter and 7.5 mm thickness to maximize torque transfer from the engine to the gearbox. The plate is made of hardened steel, and the disc is constructed from ductile cast iron, capable of withstanding thermal stress up to 480°C. The groove design and torsion springs reduce vibration and optimize friction contact surface. Each assembly weighs approximately 7 kg and can handle torque up to 220 Nm. Easy installation and full compatibility with the Peugeot clutch system extend the service life of the assembly up to 95,000 kilometers.

The Valeo clutch plate for Peugeot Pars XU7P provides uniform pressure and sufficient flexibility to prevent slipping at high engine speeds. The disc features torsion springs that reduce shock and minimize operational noise. The contact thickness of the plate with the disc is 7.5 mm, and the friction coefficient is 0.34, ensuring stable performance between 20°C and 450°C. Groove spacing is 5.5 mm, optimizing force distribution across the disc surface. This assembly is suitable for both urban and highway driving and complies with ISO 9001 international quality standards.

JAC J5 Stock Clutch Disc and Plate Valeo Brand

The JAC J5 stock clutch disc and plate by Valeo is designed with a 245 mm diameter and 8 mm thickness to maximize power transfer from the engine to the gearbox. The plate is made of hardened steel, and the disc is constructed from ductile cast iron, capable of withstanding thermal stress up to 500°C. Integrated grooves and springs reduce vibration and optimize the friction contact surface. The total assembly weighs approximately 7.8 kg and can handle torque up to 240 Nm. Easy installation and full compatibility with the JAC J5 clutch system extend the service life of the assembly up to 100,000 kilometers.

The Valeo clutch plate for JAC J5 provides uniform pressure and sufficient flexibility to prevent slipping at high engine speeds. The disc features torsion springs that reduce shock and minimize operational noise. The contact thickness of the plate with the disc is 8 mm, and the friction coefficient is 0.35, ensuring stable performance between 20°C and 450°C. Groove spacing is 6 mm, optimizing force distribution across the disc surface. This assembly is suitable for both urban and highway driving and complies with ISO 9001 international quality standards.

JAC J3 Stock Clutch Disc and Plate Valeo Brand

The JAC J3 stock clutch disc and plate by Valeo is designed with a 230 mm diameter and 7.5 mm thickness to maximize engine-to-gearbox power transfer. The plate is made of durable steel, and the disc is constructed from ductile cast iron, capable of withstanding thermal stress up to 480°C. Integrated grooves and springs reduce vibration and shock while optimizing the friction contact surface. The total assembly weighs approximately 7 kg and can handle torque up to 215 Nm. Easy installation and full compatibility with the JAC J3 clutch system extend the service life of the assembly up to 95,000 kilometers.

The Valeo clutch plate for JAC J3 provides uniform pressure and sufficient flexibility to prevent slipping at high engine speeds. The disc features torsion springs that reduce operational noise and control vibration. The contact thickness of the plate with the disc is 7.5 mm, and the friction coefficient is 0.33, ensuring stable performance between 20°C and 450°C. Groove spacing is 5.5 mm, optimizing force distribution across the disc surface. This assembly is suitable for both urban and highway driving and complies with ISO 9001 international quality standards.

Tramec servo motor solar gearbox

Tramec planetary gearboxes are designed for servo motor applications and feature a planetary planetary structure. These gearboxes offer high output torque and remarkable power density, with a wide range of reduction ratios standard reduction ratios and high custom ratio options and excellent mechanical efficiency often above 95%. Their compact design and extremely low backlash less than 1 arcmin in Precision models are key features.

These gearboxes are typically built with a lightweight yet robust one-piece aluminum housing, hardened and ground gears for high strength and durability, and high-quality bearings to withstand radial and axial loads. The output is often available as a smooth shaft, splined shaft, or standard flanged interface compatible with common servo motor interfaces.

Tramec gearboxes for precision servo applications require smooth and quiet operation, high positioning accuracy, and exceptional reliability. They can withstand high shock and momentary loads and are available in different backlash classes from Standard to Precision and High Precision. These gearboxes are usually pre-filled with long-life grease and require minimal maintenance. Their optimized design ensures smooth power transmission with minimal heat dissipation.

Compliance with inter

PGR solar gearbox

The PGR series planetary gearbox represents advanced motion control technology, engineered for high-performance servo applications. Featuring a precision planetary gear design with reduction ratios from 3:1 to 100:1+, it delivers exceptional torque density and mechanical efficiency exceeding 96%. The hardened and ground gear teeth, combined with high-quality bearings, ensure reliable operation under heavy radial and axial loads. With backlash as low as 1 arc-minute in precision models, it maintains superior positioning accuracy for demanding industrial automation. The compact aluminum housing provides optimal heat dissipation while reducing overall system weight.

PGR gearboxes incorporate a robust one-piece housing design with multiple output options including solid shaft, splined shaft, and servo-mount flange configurations. Advanced lubrication technology extends maintenance intervals, while the optimized gear geometry ensures quiet operation even at high speeds. The units meet ISO 9001 quality standards and carry CE certification, making them suitable for CNC machinery, robotic systems, and precision packaging equipment. Their ability to withstand shock loads and momentary overloads, combined with minimal thermal expansion characteristics, makes them ideal for continuous

Motovario helical gearbox

The Motovario helical gearbox series delivers high-efficiency power transmission for industrial applications, featuring precision-engineered helical gearing with torque capacities ranging from 100 Nm to 15,000 Nm. These gearboxes achieve exceptional mechanical efficiency up to 96% through optimized tooth profiles and premium bearing systems. The cast iron or aluminum housing options provide superior heat dissipation and corrosion resistance, while the modular design allows for multiple mounting positions foot-mounted, flange-mounted, or shaft-mounted configurations. With backlash as low as 5 arc-minutes in precision models, these units ensure smooth operation and accurate positioning. Standard models feature IP55 protection, with optional IP66 sealing available for harsh environments. The advanced lubrication system extends maintenance intervals up to 20,000 operating hours.

Motovarios helical gear technology reduces operational noise levels below 68 dBA while minimizing vibration for enhanced system longevity. The hardened and ground gear teeth case-hardened to 60 HRC provide extended service life even under continuous heavy loads. These gearboxes support various input options including IEC-standard motor flanges and direct shaft connections. Thermal optimization maintains

Transtecno helical gearbox

The Transtecno helical gearbox series offers high-performance power transmission solutions with torque capacities ranging from 50 Nm to 12,000 Nm. Engineered with precision-cut helical gears, these units achieve mechanical efficiency up to 96% while maintaining exceptionally low noise levels below 65 dBA. The heavy-duty cast iron housing provides superior heat dissipation and vibration damping, with optional aluminum housings available for weight-sensitive applications. Featuring multiple mounting configurations foot, flange, and shaft-mounted options, these gearboxes support standard IEC motor interfaces and offer backlash as low as 3 arc-minutes in precision models. The advanced sealing system meets IP66 protection standards, making them suitable for harsh industrial environments.

Transtecnos helical gear technology incorporates case-hardened gear teeth 58-60 HRC with precision grinding for extended service life under continuous operation. The optimized bearing arrangement ensures reliable performance with radial and axial load capacities exceeding industry standards. These gearboxes operate efficiently across a wide temperature range -20°C to +100°C and come with long-life lubrication for maintenance intervals up to 25,000 hours. Certified to ISO 9001 standards with CE,

SITI Helical Gearbox

The SITI helical gearbox series delivers high-efficiency power transmission with torque capacities ranging from 30 Nm to 10,000 Nm. Featuring precision-ground helical gears with 20CrMnTi alloy steel construction, these units achieve up to 97% mechanical efficiency while operating at noise levels below 63 dBA. The rugged cast iron housing GG25 grade provides exceptional thermal stability and vibration damping, with optional aluminum alloy versions for weight-critical applications. Available in foot-mounted, flange-mounted, and shaft-mounted configurations, these gearboxes support IEC standard motor interfaces and offer ultra-precise models with backlash as low as 2 arc-minutes. The triple-lip sealing system ensures IP67 protection against dust and water ingress, while the advanced lubrication system extends maintenance intervals to 30,000 operating hours.

SITIs innovative gear design incorporates carburized and tempered gear teeth 60-62 HRC with profile grinding for maximum durability under continuous heavy loads. The optimized bearing arrangement exceeds AGMA load capacity standards by 15-20%, ensuring reliable performance in demanding conditions. These gearboxes operate efficiently across an extended temperature range -25°C to +110°C and feature corrosion-resistant surf

Electrogen Two-Speed Electric Motor

The Electrogen two-speed electric motor is designed with power ratings ranging from 0.37 to 30 kilowatts and operates at a voltage of 380 volts. This single-phase and three-phase motor offers two operating speeds of 1500 and 3000 revolutions per minute, allowing speed selection according to industrial requirements. With an insulation class of F and an IP54 protection rating, this motor is resistant to dust and moisture. It operates at a frequency of 50 Hz and guarantees energy efficiency compliant with the IE2 standard. The motor’s weight and dimensions vary depending on power and are designed for quick and safe installation.

Mechanically, the motor shaft diameter ranges from 19 to 50 millimeters depending on the model, providing high torque capacity under various load conditions. The copper windings are enamel-coated, ensuring excellent thermal conductivity and durability. The cooling system is of the IC411 type, which uses forced airflow to reduce internal temperature. Additionally, vibration and noise levels are minimized, and the motors comply with international standards ISO 9001 and IEC to ensure reliable and stable performance.

Automotive refractory bearing L90

The heat-resistant automotive bearing L90 is an advanced, durable product designed to withstand extreme conditions and high temperatures. It is constructed from stainless steel with a heat-resistant coating, offering exceptional resistance to heat, wear, and corrosion. The bearing complies with international standards such as ISO 9001 and DIN 625, ensuring reliable performance. Its dynamic and static load capacities reach 12 kN and 6.5 kN, respectively, enabling smooth, frictionless operation even under heavy loads.

The L90 bearing features dual nitrile rubber seals that prevent dust and moisture ingress. It operates efficiently within a temperature range of -40°C to +250°C, making it ideal for heavy-duty, industrial, and military vehicles. Pre-lubricated with high-temperature grease, it requires minimal maintenance. Its standard dimensions—45mm inner diameter, 90mm outer diameter, and 20mm thickness—are designed in accordance with global engineering standards for optimal compatibility and performance.

Power transmission belts

Power transmission industrial belts are manufactured from a combination of polyurethane, natural rubber, and reinforced with polyester fibers or steel cords. These belts can operate within a temperature range of -30°C to 90°C and have tensile strength varying between 1500 and 7000 Newtons per centimeter of width. Belt thickness typically ranges from 5 to 20 millimeters, with widths adjustable between 10 and 100 millimeters. The belts’ flat or toothed design enables power transmission efficiency exceeding 95% while minimizing slippage, making them suitable for heavy-duty industrial applications.

The internal reinforcement system of power transmission belts usually consists of Aramid fibers or stainless steel, enhancing mechanical strength and flexibility. Their high resistance to abrasion, industrial oils, and UV radiation extends the service life beyond 10 years. These belts are designed and manufactured in compliance with ISO 9001 and DIN EN standards, ensuring stable and reliable performance in industrial machinery.

Industrial timing belts

Timing belts are engineered from polyurethane or natural rubber materials, capable of withstanding temperatures ranging from -20°C to 100°C. Belt widths typically range from 6 to 50 millimeters, with thicknesses varying between 3 and 15 millimeters. These belts feature precisely engineered teeth with depths between 2 and 6 millimeters, ensuring accurate synchronization and preventing slippage in power transmission systems. Tensile strength ranges from 2000 to 6000 Newtons per centimeter of width, enhanced by internal reinforcement with polyester fibers or steel cords.

The internal reinforcement system of timing belts is commonly made from Aramid fibers or stainless steel, guaranteeing high durability and flexibility. These belts resist industrial oils, abrasion, and ultraviolet radiation, with an estimated service life exceeding 7 years. Compliance with ISO 9001 and DIN EN standards during production ensures the quality and precise performance of timing belts across various industrial machinery applications.

BANDO industrial belts

The BANDO industrial belt is manufactured from special rubber compounds with thermal resistance up to 85°C and high mechanical strength. These belts are available in flat and toothed types, with thicknesses ranging from 4 to 12 millimeters and widths between 15 to 55 millimeters. The toothed design increases power transmission efficiency up to 95% and supports dynamic loads up to 1800 Newtons. Additionally, their high abrasion resistance makes them ideal for use in harsh industrial environments.

The internal reinforcement system of BANDO belts consists of polyester fibers and fiberglass, providing optimal flexibility and tensile strength between 1700 and 3200 Newtons per centimeter of width. These belts offer excellent resistance to oils and chemicals, ensuring a service life exceeding 8 years. Compliance with ISO 9001 and JIS standards in manufacturing guarantees superior quality and stable performance in industrial applications.

OPTIBELT industrial belts

The OPTIBELT industrial belt is manufactured using specialized rubber compounds and polyurethane materials, offering thermal resistance up to 90°C and mechanical load capacity up to 2500 Newtons. These belts feature a toothed structure with a tooth depth of 2.5 millimeters and widths ranging from 10 to 60 millimeters. The belt’s tensile strength is precisely reinforced with polyester fibers, providing tensile resistance between 2000 and 4000 Newtons per centimeter, which optimizes power transmission and reduces slippage.

The internal reinforcement system of OPTIBELT belts consists of Aramid fibers or stainless steel, ensuring high mechanical strength and extended service life. These belts exhibit excellent abrasion resistance against industrial oils and ultraviolet radiation, delivering stable and precise performance in heavy-duty applications and harsh industrial environments. Additionally, compliance with ISO 9001 and DIN EN standards guarantees the high quality and durability of OPTIBELT products.

MEGADYNE industrial belts

The MEGADYNE industrial belt is manufactured using polyurethane and natural rubber materials, providing high resistance to abrasion, heat up to 80°C, and industrial oils. These belts feature a precisely designed toothed profile, ensuring power transmission efficiency up to 98% and dynamic load capacity of up to 2000 Newtons. Belt thickness ranges from 3 to 10 millimeters, and widths vary between 10 to 50 millimeters, allowing versatile application across different industrial uses.

The internal reinforcement system of MEGADYNE belts is made from polyester fibers or stainless steel, offering high flexibility and increasing lifespan up to 10 times compared to standard belts. Additionally, the tensile strength ranges from 1500 to 3500 Newtons per centimeter of width, reducing slippage and enhancing power transmission accuracy. These features, combined with ISO 9001 and European standards compliance, make MEGADYNE belts an ideal choice for heavy-duty industrial machinery.

Vortex Hydraulic Clamp 20 cm

The Vortex Taiwan 20-centimeter hydraulic clamp has a clamping force capacity of 20 tons and is designed for heavy industries and precise machining applications. This clamp is made from alloy steel with a tensile strength of 840 MPa and features a jaw length of 200 millimeters. Its hydraulic system can withstand a working pressure of 240 bar, and the operational accuracy is guaranteed up to 0.005 millimeters. The clamp weighs approximately 13 kilograms, and its ergonomic design ensures easy installation and use. A corrosion and wear-resistant coating increases the device’s service life.

In the technical structure of the Vortex Taiwan 20-centimeter hydraulic clamp, the hydraulic system offers an optimal response time of 0.4 seconds. This clamp is manufactured according to ISO 12100 and ISO 9001 standards for safety and quality. Its anti-corrosion coating thickness is 150 microns, providing high resistance in harsh environmental conditions. The pressure control system allows precise adjustment of clamping force. The product’s operational lifespan exceeds 450,000 pressure cycles, delivering stable performance under various industrial conditions.

Vortex hydraulic clamp 30 cm

The Vortex 30-centimeter hydraulic clamp is designed for heavy industrial applications and precise machining with a clamping force capacity of 30 tons. This clamp is made from alloy steel with a tensile strength of 860 MPa and has a jaw length of 300 millimeters. Its hydraulic system can withstand a working pressure of 250 bar, and its operational accuracy is guaranteed up to 0.004 millimeters. The overall weight of the clamp is approximately 18 kilograms, allowing for easy installation and use. The wear and corrosion-resistant coating increases the product’s durability and service life in industrial environments.

In the technical structure of the Vortex 30-centimeter hydraulic clamp, the hydraulic system provides an optimal response time of 0.35 seconds. This product is designed according to ISO 12100 and ISO 9001 standards to ensure high safety and quality. The anti-corrosion coating thickness is 160 microns, providing high resistance in harsh environmental conditions. The pressure control system enables precise adjustment of the clamping force. The product’s operational lifespan exceeds 500,000 pressure cycles, guaranteeing stable performance under various industrial conditions.

Vortex hydraulic clamp 16 cm

The Vortex 16-centimeter hydraulic clamp, with a clamping force capacity of 16 tons, is designed for precise and medium-duty industrial applications. This clamp is made from alloy steel with a tensile strength of 820 MPa and has a jaw length of 160 millimeters. Its hydraulic system can withstand a working pressure of 230 bar, and its operational accuracy is guaranteed up to 0.006 millimeters. The total weight of the clamp is approximately 10 kilograms, allowing for easy installation and use. The corrosion and wear-resistant coating enhances the product’s durability in harsh working environments, while its ergonomic design ensures safe and comfortable operation.

In the technical structure of the Vortex 16-centimeter hydraulic clamp, the hydraulic system provides optimal performance with a response time of less than 0.5 seconds. This product is designed according to ISO 12100 and ISO 9001 standards to ensure high safety and quality. The anti-corrosion coating thickness is approximately 120 microns, offering significant resistance against harsh environmental conditions. The pressure control system enables precise adjustment of the applied clamping force. The clamp’s operational lifespan exceeds 300,000 pressure cycles, guaranteeing stable performance under various industrial

Vortex hydraulic clamp 20 cm

The Vortex 20-centimeter hydraulic clamp is designed for medium-duty industrial applications and precise machining with a clamping force capacity of 20 tons. This clamp is made from alloy steel with a tensile strength of 830 MPa and has a jaw length of 200 millimeters. Its hydraulic system can withstand a working pressure of up to 240 bar, and its operational accuracy is guaranteed up to 0.005 millimeters. The total weight of the clamp is approximately 12.5 kilograms, allowing for easy installation and use. The wear and corrosion-resistant coating enhances durability and extends the devices lifespan in industrial environments, while its ergonomic design ensures user safety and comfort.

Structurally, the Vortex 20-centimeter hydraulic clamp features a hydraulic system with a response time of 0.4 seconds, ensuring fast and precise operation. This clamp is designed according to international standards ISO 9001 and ISO 12100 to provide high quality and safety. The anti-corrosion coating thickness is about 150 microns, offering significant resistance against harsh environmental conditions. The pressure control system allows precise adjustment of the clamping force, and the device’s operational lifespan exceeds 450,000 pressure cycles, guaranteeing stable performance in industrial

Vortex hydraulic clamp 30 cm

The Vortex 30-centimeter hydraulic clamp, with a clamping force capacity of 30 tons, is designed for heavy-duty machining and high-precision industrial assembly tasks. This clamp is constructed from alloy steel with a tensile strength of 860 MPa and features a jaw length of 300 millimeters. Its hydraulic system can withstand a working pressure of 250 bar, with operational accuracy guaranteed up to 0.004 millimeters. The clamp weighs approximately 18 kilograms, and its ergonomic design ensures easy installation and safe usage. A protective coating with a thickness of 160 microns provides excellent resistance to corrosion and wear.

On the technical side, the Vortex 30-centimeter hydraulic clamp features a hydraulic system with a response time of 0.35 seconds, enhancing productivity on production lines. It is designed according to ISO 12100 and ISO 9001 standards to ensure safety and quality. The pressure control system enables precise adjustment of the applied clamping force, which is essential for working with delicate components. The clamp has been tested for over 500,000 pressure cycles, proving its reliability under harsh working conditions. These features make it an ideal choice for both heavy and precision industries.