Hex Nuts

studbolt 1/2 inch 7cm

The 1/2 inch 7 cm stud bolt is manufactured from high-strength carbon steel with a cold galvanization coating to improve mechanical strength and corrosion resistance. The total length of this component is 70 millimeters, and the nominal thread diameter is 12.7 millimeters. The threads are designed in UNC form with a standard pitch of 13 TPI to ensure full compatibility with industrial nuts. The ultimate tensile strength of this stud bolt is approximately 800 megapascals, allowing it to withstand heavy tensile and compressive loads.

The surface of the 1/2 inch 7 cm stud bolt is precisely machined, providing uniform fastening and preventing any looseness in industrial connections. The surface hardness of this component ranges between 28 to 32 HRC, ensuring a balance between strength and flexibility. This stud bolt is suitable for use in automotive, petrochemical, and heavy steel structure applications. It is fastened using class 8 hex nuts, with a standard tightening torque of approximately 70 newton-meters.

sSteel studbolt grade b7 size 1/2 inch 8 centimeter

The B7 steel stud bolt size 1/2 inch 8 cm is manufactured from chromium-molybdenum alloy steel and produced according to ASTM A193 standards. The total length of the component is 80 millimeters, with a nominal thread diameter of 12.7 millimeters. The threads are designed in UNC form with a 13 TPI pitch, ensuring compatibility with class 2H industrial nuts. The ultimate tensile strength of this stud bolt is approximately 860 megapascals, while its yield strength is around 720 megapascals. These properties allow the component to perform reliably under high temperature and heavy mechanical stress conditions.

The surface of the B7 stud bolt size 1/2 inch 8 cm is heat-treated with precise hardening, achieving a hardness level of approximately 35 HRC. The surface is coated with galvanization or phosphate to enhance resistance against corrosion and oxidation. This stud bolt is widely used in oil, gas, petrochemical, and pressure vessel applications. It is fastened using class 2H hex nuts, with a standard tightening torque of about 75 newton-meters.

steel studbolt grade B7 size 12 inch 9 centimeters

The B7 steel stud bolt, size 1/2 inch 9 cm, is manufactured from chromium-molybdenum alloy steel and produced according to ASTM A193 standards. The total length of this component is 90 millimeters, with a nominal thread diameter of 12.7 millimeters. The threads are designed in UNC profile with a standard pitch of 13 TPI, ensuring full compatibility with class 2H hex nuts. The ultimate tensile strength of this stud bolt is approximately 860 megapascals, while its yield strength is around 720 megapascals. These specifications ensure high performance under extreme temperature and high-pressure conditions.

The surface of the B7 stud bolt, size 1/2 inch 9 cm, is precisely heat-treated, achieving a hardness of approximately 35 HRC. Galvanized or phosphate coating on the surface enhances corrosion and oxidation resistance. This stud bolt is widely used in oil, gas, petrochemical, power plant, and high-pressure structural applications. It is fastened using class 2H hex nuts, with a standard tightening torque of about 78 newton-meters.

sSteel studbolt grade b7 size 12 inch 11 centimeter

The B7 grade steel stud bolt, size 1/2 inch and length 11 cm, is manufactured from chromium-molybdenum alloy steel with heat treatment and complies with ASTM A193 standards. The total length of this component is 110 millimeters, with a nominal thread diameter of 12.7 millimeters. The threads are designed in UNC form with a standard pitch of 13 TPI, ensuring full compatibility with class 2H nuts. The ultimate tensile strength of this stud bolt is approximately 860 megapascals, while its yield strength is around 720 megapascals. These properties ensure stable performance under extreme temperature and high-pressure conditions.

The surface of the B7 steel stud bolt, size 1/2 inch and 11 cm length, is precisely hardened to achieve approximately 35 HRC hardness. Galvanized or phosphate coating enhances corrosion and oxidation resistance. This stud bolt is widely used in oil, gas, petrochemical, and power plant applications. It is fastened using class 2H hex nuts, with a standard tightening torque of about 80 newton-meters.

DIN933 hex bolt

Hex screws are produced as full thread according to DIN933 standard. All-thread hex bolts are produced in different sizes from M3 to M36 and are connected together with DIN934 simple hex nuts. Full thread hexagon screws are produced in iron grades 4.8, 5.6, dry steel grade 8.8, structural steel grade 10.9 and 12.9. The stainless steel grades of all-round hexagon screws include A2 and A4 grades, which A2 grade is made of 304 steel and A4 grade is made of 316 steel.

class 8 carbon steel nut

Class 8 dry hex nuts are made of steel grade with a tensile strength of 800 N/mm2. Dry hex nuts are used in the connections of half rib and full dry hex bolts, dry Allen screws and dry metric screws. In the chemical composition of this steel alloy, an average percentage of carbon is used, and in order to increase the mechanical capabilities of the dry nut, heat hardening is also used.

TIMKEN oval bearing unit

TIMKEN oval bearing housing unit is a type of bearing that requires limited space to attach onto as opposed to square bearing units. TIMKEN oval bearing units require 2 industrial hex or Allen bolt and standard hex nuts to be attached that are used more often in 8.8 grade. this shape of bearing unity provides enough space for several bearing units to be attached on one surface. TIMKEN is an American manufacturer of all kinds of bearings.