Electrofusion

Poliran HDPE 6 Bar Polyethylene Pipe

The Poliran HDPE 6bar pipe is manufactured from high-density polyethylene grade PE100 with a density of approximately 0.955 g/cm³. It is designed for a working pressure of 6 bar and operates reliably within a temperature range of 0 to 40°C. The tensile strength of this pipe is about 25 MPa, and its linear expansion coefficient is 0.18 mm/m per °C. Due to its low specific weight and excellent flexibility, it is widely used in water transmission, sewage, and pressurized irrigation systems.

The internal surface of the Poliran HDPE pipe is extremely smooth with a roughness coefficient of approximately 0.007, minimizing flow pressure loss. The pipe connections are available in butt-welded or electrofusion types, and it can withstand impacts at temperatures as low as –20°C. This pipe is manufactured according to ISIRI 14427 and ISO 4427 standards, ensuring consistent quality and long-term durability under various working conditions.

Poliran HDPE 10Bar Polyethylene Pipe

The Poliran HDPE 10bar pipe is manufactured from high-density polyethylene grade PE100 with an approximate density of 0.955 g/cm³. It is designed to withstand a working pressure of 10 bar and operates efficiently in a temperature range of 0 to 40°C. Its tensile strength is around 26 MPa, and the elastic modulus is close to 1000 MPa. The pipe’s linear expansion coefficient is about 0.18 mm/m per °C, and it offers excellent resistance to UV radiation and chemical corrosion. These properties make it suitable for municipal water transmission, sewage, and pressurized irrigation systems.

The inner surface of the Poliran HDPE pipe is extremely smooth, with a roughness coefficient of approximately 0.007, minimizing pressure loss in flow. It is produced in diameters ranging from 20 to 400 mm and lengths of 6 or 12 meters. The connection method includes butt-welding or electrofusion joints, allowing the pipe to withstand impacts at temperatures down to –20°C. The Poliran HDPE 10bar pipe complies with ISO 4427 and ISIRI 14427 standards and offers a service life exceeding 50 years under normal operating conditions.

Poliran Polyethylene Pipe

The Poliran polyethylene pipe is manufactured from high-density polyethylene grades PE100 and PE80 with a density ranging from 0.950 to 0.955 g/cm³. These pipes are designed for various working pressures between 4 and 25 bar and operate reliably within a temperature range of 0 to 40°C. The tensile strength of the material is approximately 25 MPa, and the linear expansion coefficient is 0.18 mm/m per °C. The uniform structure and smooth inner surface reduce pressure losses and enhance fluid transmission efficiency. Poliran polyethylene pipes are widely used in water supply networks, sewage systems, and pressurized irrigation applications.

The inner surface of these pipes is extremely smooth, with a roughness coefficient of approximately 0.007, minimizing frictional flow loss. They are produced in diameters from 16 to 400 mm and connected using butt-weld or electrofusion methods. Their excellent resistance to corrosion, crack formation, and UV radiation ensures a service life exceeding 50 years. The production of these pipes complies with ISIRI 14427 and ISO 4427 standards, guaranteeing quality, strength, and dimensional consistency under diverse operating conditions.

Poliran polyethylene reducer

The Poliran polyethylene reducer is made from high-density polyethylene grade PE100 with a density of approximately 0.955 g/cm³. It is designed to connect pipes of different diameters in water supply, sewage, and irrigation systems. This fitting is produced by high-pressure injection molding and features a tensile strength of about 25 MPa and an impact resistance above 10 kJ/m². Its operating temperature range is 0 to 40°C, with nominal pressure ratings varying between 6 and 16 bar depending on the model. The precise internal geometry minimizes flow turbulence and prevents sudden pressure drops within the pipeline.

Poliran polyethylene reducers are available in two main types: butt-weld and compression, covering diameters from 20 to 400 mm. The welded type is installed using butt fusion or electrofusion methods, ensuring complete sealing and long-term reliability. Their excellent resistance to corrosion, cracking, and chemical exposure provides a service life exceeding 50 years under normal operating conditions. The product is manufactured according to ISIRI 14427 and ISO 4427 standards and is fully compatible dimensionally and mechanically with Poliran polyethylene pipes.

Poliran polyethylene cross fitting

The Poliran polyethylene cross fitting is manufactured from high-density polyethylene grade PE100 with an approximate density of 0.955 g/cm³. This component is designed for four-way branching in water distribution, sewage, and pressurized irrigation systems. It provides a tensile strength of around 25 MPa and impact resistance exceeding 10 kJ/m². The operating temperature range is 0 to 40°C, and the nominal pressure rating varies between 6 and 16 bar depending on the model. Its precisely engineered angles and smooth inner walls ensure uniform flow distribution and minimize stress concentration at the branching points.

Poliran polyethylene cross fittings are available in butt-weld and electrofusion types, covering diameters from 32 to 400 mm. The butt-weld version is installed using controlled heat fusion, ensuring complete sealing and superior mechanical integrity. These fittings exhibit excellent resistance to corrosion, UV radiation, and chemical agents, offering a service life of over 50 years. Production follows ISIRI 14427 and ISO 4427 standards, ensuring dimensional precision and consistent quality across all models.

Poliran 45-degree polyethylene elbow

The Poliran 45-degree polyethylene elbow is manufactured from high-density polyethylene grade PE100 with a density of approximately 0.955 g/cm³. This fitting is used to redirect fluid flow at a 45-degree angle in water distribution, sewage, and pressurized irrigation networks. Its tensile strength is about 25 MPa, and impact resistance exceeds 10 kJ/m². The operating temperature range is 0 to 40°C, and the nominal pressure varies from 6 to 16 bar depending on the model. The precisely engineered curvature and smooth internal surface minimize flow turbulence and pressure loss.

Poliran 45-degree elbows are produced in butt-weld and electrofusion types, available in diameters from 32 to 400 mm. The butt-weld type is installed using the butt-fusion method, providing reliable sealing and excellent mechanical strength. Their superior resistance to corrosion, cracking, and UV radiation ensures a service life exceeding 50 years under normal conditions. These fittings are manufactured in compliance with ISIRI 14427 and ISO 4427 standards, ensuring consistent quality, dimensional precision, and full compatibility with Poliran polyethylene pipes.

Poliran 45-degree polyethylene tee

The Poliran 45-degree polyethylene tee is manufactured from high-density polyethylene grade PE100 with an approximate density of 0.955 g/cm³. This fitting is designed for branching fluid flow at a 45-degree angle in water supply, sewage, and pressurized irrigation systems. The tensile strength of the material is approximately 25 MPa, and impact resistance exceeds 10 kJ/m². Its operating temperature range is 0 to 40°C, and the nominal pressure varies between 6 and 16 bar depending on the model. Precisely engineered internal geometry and angles minimize flow turbulence and ensure uniform pressure distribution.

Poliran 45-degree tees are available in butt-weld and electrofusion types, covering diameters from 32 to 400 mm. The butt-weld type is installed using heat fusion, providing complete sealing and high mechanical strength. These fittings offer excellent resistance to corrosion, cracking, and UV radiation, with a service life exceeding 50 years under normal conditions. Production complies with ISIRI 14427 and ISO 4427 standards, ensuring dimensional accuracy, consistent quality, and full compatibility with Poliran polyethylene pipes.

Poliran 90-degree polyethylene elbow

The Poliran 90-degree polyethylene elbow is manufactured from high-density polyethylene grade PE100 with an approximate density of 0.955 g/cm³. It is designed to change the flow direction by a right angle in water supply, sewage, and pressurized irrigation systems. This fitting provides a tensile strength of about 25 MPa and impact resistance exceeding 10 kJ/m². Its operating temperature range is 0 to 40°C, and the nominal pressure varies from 6 to 16 bar depending on the model. The precisely engineered curvature and uniform wall thickness minimize pressure loss and enhance mechanical stability against localized stresses.

Poliran 90-degree elbows are available in butt-weld and electrofusion types, covering diameters from 32 to 400 mm. The butt-weld type is installed using controlled heat fusion, ensuring complete sealing and long-term durability. These fittings exhibit excellent resistance to corrosion, cracking, and UV radiation, with a service life exceeding 50 years under normal operating conditions. Manufacturing is carried out in compliance with ISIRI 14427 and ISO 4427 standards, guaranteeing quality, dimensional precision, and full compatibility with Poliran polyethylene pipes.

Poliran polyethylene inspection tee

The Poliran polyethylene inspection tee is manufactured from high-density polyethylene grade PE100 with an approximate density of 0.955 g/cm³. It is designed to provide access and inspection points in water, sewage, and pressurized irrigation pipelines. The tensile strength of this fitting is about 25 MPa, and impact resistance exceeds 10 kJ/m². Its operating temperature range is 0 to 40°C, and nominal pressure varies from 6 to 16 bar depending on the model. The internal design and angles ensure uniform flow distribution and reduce turbulence in the main pipeline.

Poliran inspection tees are available in butt-weld and electrofusion types, covering diameters from 110 to 400 mm. The butt-weld type is installed using heat fusion, providing reliable sealing and high mechanical strength. These fittings offer excellent resistance to corrosion, cracking, and UV radiation, with a service life exceeding 50 years under normal operating conditions. Manufacturing complies with ISIRI 14427 and ISO 4427 standards, ensuring full compatibility with other Poliran polyethylene pipes.

Poliran 90-degree polyethylene tee

The Poliran 90-degree polyethylene tee is manufactured from high-density polyethylene grade PE100 with an approximate density of 0.955 g/cm³. This fitting is designed to create a right-angle branch in water supply, sewage, and pressurized irrigation systems. It provides a tensile strength of about 25 MPa and impact resistance exceeding 10 kJ/m². Its operating temperature range is 0 to 40°C, and nominal pressure varies from 6 to 16 bar depending on the model. Precisely engineered angles and uniform wall thickness minimize pressure loss and enhance mechanical stability at branch points.

Poliran 90-degree tees are available in butt-weld and electrofusion types, covering diameters from 32 to 400 mm. The butt-weld type is installed using controlled heat fusion, ensuring complete sealing and high mechanical strength. These fittings exhibit excellent resistance to corrosion, cracking, and UV radiation, with a service life exceeding 50 years under normal operating conditions. Production complies with ISIRI 14427 and ISO 4427 standards, ensuring dimensional precision, consistent quality, and full compatibility with Poliran polyethylene pipes.

Poliran 90 Degree Reducing Tee Polyethylene Pipe

The Poliran 90-degree reducing tee is manufactured from high-density polyethylene grade PE100 with an approximate density of 0.955 g/cm³. It is designed to redirect flow and connect pipes of different diameters at a right angle. The material’s tensile strength is approximately 25 MPa, and impact resistance exceeds 10 kJ/m². Its operating temperature range is 0 to 40°C, and nominal pressure varies from 6 to 16 bar depending on the model. Precisely engineered angles and uniform wall thickness minimize pressure loss and ensure uniform flow distribution within the network.

Poliran 90-degree reducing tees are available in butt-weld and electrofusion types, covering diameters from 32 to 400 mm. The butt-weld type is installed using heat fusion, providing complete sealing and high mechanical strength. Excellent resistance to corrosion, cracking, and UV radiation ensures a service life exceeding 50 years under normal operating conditions. Manufacturing complies with ISIRI 14427 and ISO 4427 standards, guaranteeing dimensional accuracy, consistent quality, and full compatibility with Poliran polyethylene pipes.

Poliran 45-Degree Reducing Tee Polyethylene Pipe

The Poliran 45-degree reducing tee is manufactured from high-density polyethylene grade PE100 with an approximate density of 0.955 g/cm³. This fitting is designed to redirect flow and connect pipes of different diameters at a 45-degree angle in water supply, sewage, and pressurized irrigation systems. Its tensile strength is approximately 25 MPa, and impact resistance exceeds 10 kJ/m². The operating temperature range is 0 to 40°C, with nominal pressure varying from 6 to 16 bar depending on the model. Precisely engineered angles and wall thickness reduce pressure loss and ensure uniform flow distribution.

Poliran 45-degree reducing tees are produced in butt-weld and electrofusion types, available in diameters from 32 to 400 mm. The butt-weld version is installed using heat fusion, providing complete sealing and high mechanical strength. Excellent resistance to corrosion, cracking, and UV radiation ensures a service life exceeding 50 years under normal operating conditions. Manufacturing complies with ISIRI 14427 and ISO 4427 standards, guaranteeing quality, dimensional accuracy, and full compatibility with Poliran polyethylene pipes.

Poliran Two-Way Polyethylene Tee

The Poliran two-way polyethylene tee is manufactured from high-density polyethylene grade PE100 with an approximate density of 0.955 g/cm³. This fitting is designed to provide two-way connection and branching in water supply, sewage, and pressurized irrigation networks. The material has a tensile strength of approximately 25 MPa and impact resistance exceeding 10 kJ/m². Its operating temperature range is 0 to 40°C, with nominal pressure varying between 6 and 16 bar depending on the model. Precisely engineered internal geometry and uniform wall thickness minimize flow turbulence and ensure even pressure distribution in the system.

Poliran two-way tees are produced in butt-weld and electrofusion types, available in diameters from 32 to 400 mm. The butt-weld type is installed using heat fusion, providing complete sealing and high mechanical strength. Excellent resistance to corrosion, cracking, and UV radiation ensures a service life exceeding 50 years under normal operating conditions. Manufacturing complies with ISIRI 14427 and ISO 4427 standards, guaranteeing quality, dimensional accuracy, and full compatibility with Poliran polyethylene pipes.