| Exporter, Wholesale, Manufacturer | |
| Tehran |  |
| +989122003350 | |
- Price :negotiated
dryer , Iran
- Price :To negotiate
- order by whatsapp
Refrigerated dryers are designed for standard capacities of 10 to 500 cubic feet per minute CFM. Their pressure dew point reaches 3± degrees Celsius at 7 bar working pressure. Screw compressors with 3 to 100 kW power consume 400V three-phase electrical current. The specific energy consumption SEC of advanced models reaches 0.2 kW per CFM. The moisture separator tank is constructed from epoxy-coated carbon steel. This tank withstands working pressures up to 16 bar.
The main structure comprises three separate circuits: refrigeration, air, and control. Heat exchangers are made from pure copper with a 40 W/m·K heat transfer coefficient. Canopy filters operate with 99.9% efficiency against 0.01-micron particles. The energy recovery system recovers up to 25% of waste heat. Dew point sensors monitor parameters with ±1 degree Celsius accuracy. Solenoid valves with a response time under 100 milliseconds operate the system.You can order and buy dryer from Iran by contacting us through whatsaap and email.
WEBSITE: dryer Iran
Key Considerations When Purchasing an Air Dryer
Selecting the right dryer for a compressed air system depends on technology type, capacity, and required dew point. Refrigerant dryers are suitable for a dew point of 3 to 5°C and standard air applications. Desiccant adsorption dryers are essential for very low dew points down to -70°C in sensitive industries like pharmaceuticals and electronics. The dryer capacity must be matched to the compressors air flow rate m³/min and ambient temperature. The dryers energy consumption, especially for desiccant models, must be carefully calculated. Automatic control capability such as pressure swing is important for energy savings. Standard certifications like ISO 9001 and CE indicate build quality. Installation space and ease of maintenance are key operational factors. After-sales service and availability of filters and desiccant are critical for continuous operation. Consultation with a specialist engineer is recommended for selecting the most precise model.
