
compressor , Iran
- Price :To negotiate
- order by whatsapp
Industrial screw compressors use male and female rotors made of alloy steel with a 4+6 profile. Rotor speed ranges from 1800 to 3600 RPM with a 0.01 mm tolerance. Volumetric flow capacity varies from 10 to 1000 cubic meters per minute. Standard outlet working pressure is 7 to 13 bar, reaching 35 bar in high-pressure models. Volumetric efficiency ranges between 85% and 95% at rated load. A three-phase electric motor with Class F insulation and IP55 protection is installed.
A dual-stage cooling system separately controls oil and air temperature. Optimal operating oil temperature is maintained between 70 and 80 degrees Celsius. Main filters operate with 99.98% efficiency removing particles down to 0.1 microns. The oil separator tank is made of 304 stainless steel with an internal epoxy coating. A PLC control system with pressure and temperature sensors monitors parameters at 0.5% accuracy. The generated sound pressure level is below 70 dB at a one-meter distance.You can order and buy compressor from Iran by contacting us through whatsaap and email.
WEBSITE: compressor Iran
Selecting the Best Type of Compressor
Optimal compressor selection depends on pressure requirements, air flow rate, stability, and application. Piston positive displacement compressors are suitable for high pressures up to 15 bar and low flow rates. Screw rotary screw compressors are optimal for continuous duty, high flow rates, and energy efficiency. Centrifugal compressors are used in large industries for very high flow rates and medium pressure. The lubrication type oil-injected, oil-free is determined by application sensitivity food, pharmaceutical. Energy consumption, noise level, and maintenance costs are key criteria. Compliance with ISO 8573 standards for air quality and CE certification for safety are essential. Finally, consultation with a specialist engineer based on the actual load profile guarantees the best selection.






