| Exporter, Wholesale, Manufacturer | |
| Tehran_North |  |
| +989122003350 | |
- Price :negotiated
elevator control panel , Iran
An elevator control panel is the central unit responsible for managing cabin motion, door operation, and safety circuits in traction and hydraulic systems. Standard input voltage is 380 to 400 volts AC three phase at 50 hertz. A 24 volt DC control power supply rated between 100 and 500 watts feeds the command circuits. A VVVF drive rated from 5.5 to 75 kilowatts enables speed control from 0 up to 2.5 meters per second. Inverter output current ranges between 18 and 180 amperes depending on system capacity. Cabin leveling accuracy is maintained within ±2 millimeters using incremental encoder feedback.
The structure includes a 32 bit processor based main board, drive module, dual safety contactors, and protective relays. Metal enclosure protection ranges from IP20 to IP54 with sheet thickness between 1.5 and 2 millimeters. Insulation resistance between power circuits and chassis exceeds 100 megaohms at 1000 volts DC testing. Protective functions cover overcurrent, short circuit, phase loss, overheating, and overspeed monitoring. Operating temperature range is defined from minus 10 to plus 55 degrees Celsius. Quality assurance includes full functional testing, rated load verification, and electromagnetic compatibility EMC evaluation.You can order and buy elevator control panel from Iran by contacting us through whatsaap and email.
WEBSITE: elevator control panel Iran
Elevator Control Panel Safety Standards in iran
Elevator control panel safety standards are defined by international and national regulations to reduce risk levels below SIL2. The primary design reference is EN 81-20 and its electrical testing section in EN 81-50, which specify safety circuit and performance requirements. Electrical equipment must comply with IEC 60204-1 for safe power and control wiring. Electromagnetic compatibility must meet emission and immunity limits defined in IEC 61000. The enclosure protection rating should be at least IP54 according to IEC 60529 to ensure resistance against dust and moisture. Grounding resistance below 2 ohms and dual channel safety relays are mandatory. Brake performance testing, emergency stop validation, and 1000 VDC insulation testing must be completed before commissioning.
